Installing H&R Lowering Springs On My Daily Driver!!!

[@Redlanevo8]

Just changed the shocks and springs on my 02 svt. I wish my bolts came out this easy. Had to do some questionable things to get the springs in the rear. The main bolt would not come out. Nice video.

[@Driqsspeedshop]

My bad man been busy with finishing up school and haven’t been on this channel much. But them bolts gave me a little trouble until I drenched them in wd-40 and gave them the impact dream

[@benharvey1449]

Should’ve shown how it looks after the springs

[@Driqsspeedshop]

yea I thought about it after I uploaded sorry about that

[@danilobenitez142]

Dang if only if was this easy in the Midwest with these rusted bolts. Smh

[@zanderx7]

Fr😭😭😂😂😂

[@zanderx7]

This guys focus is insanely clean

[@Driqsspeedshop]

Yea man I’m from the good ole south don’t have to worry about rust much as long as people take care of their stuff

[@dreamwrld7894]

How'd you install the front springs I'm thinking about doing this with mine but I'm scared to take the spring off

[@Driqsspeedshop]

Sorry for the slow response. But for the front I used spring compressors from O’Reillys but your closest auto parts store should have them and they aren’t that expensive either from what I seen I believe mine were around 30 when I bought them. But you compress the spring to get the top hat off without it popping on you and then compress the new spring to get it back on the strut and get the top hat back on. But do this slow and carefully so you don’t get hit by the spring.

[@flaviosilva1487]

Hom many mm new springs 35mm ou 40mm ?

[@Driqsspeedshop]

I got about a little over an inch dropped but I need to get new suspension because my old suspension is old and busted so after of you’re still interested I’ll give you a final drop in height. And sorry for the super late response I been super busy with school and haven’t been active on this channel