For more info on the keyless entry: www.bimmerforum... 𝙄𝙛 𝙮𝙤𝙪 𝙡𝙞𝙠𝙚𝙙 𝙩𝙝𝙚 𝙫𝙞𝙙𝙚𝙤 𝙢𝙖𝙠𝙚 𝙨𝙪𝙧𝙚 𝙩𝙤 𝙡𝙞𝙠𝙚 𝙖𝙣𝙙 𝙨𝙪𝙗𝙨𝙘𝙧𝙞𝙗𝙚! Hit that notifications bell and never miss an upload! Instagram seen it first 🤷🏻♂️ 𝙄𝙣𝙨𝙩𝙖𝙜𝙧𝙖𝙢 - www.instagram....
Пікірлер: 27
@e30hop2 жыл бұрын
Hey thanks to your video and your link to the bimmerforums, I was able to install keyless entry remote on a pre-wired US Spec OBDII 318ti! The process of getting the remotes programmed seemed to be the same. To anyone looking to do it, you just need the correct equipment and then get the timing correct during programming. Easier when you have someone to help with the trunk.
@E36tyler2 жыл бұрын
Happy to hear it, enjoy.
@lightning52732 жыл бұрын
My car didn't come with the keyless entry remote. Bought one that was similar to a Subaru and it worked! Same color you have in the video, black and gray.
@E36tyler2 жыл бұрын
Yes, Subaru and BMW used the same fob! Glad you got yours setup!
@jet44639 ай бұрын
I know it’s an old comment, any way you’d have a link to what you bought? Found one on Amazon same thing my dad has on his Subaru and one of the part numbers matches my module thing in my e36
@senorvac32282 ай бұрын
@jet4463 most of them should work, if it's reasonably cheap worth the try
@JeanSupreme3 жыл бұрын
Dude I just bought mine from eBay. Waiting to go back home and put it on!!!
@GotBeard1337 Жыл бұрын
There's a single plug coming off the 12pin, has blue plastic on in. What does that plug into?
@OptimisedTutorials3 жыл бұрын
Link to the forum post? Very interested.
@E36tyler3 жыл бұрын
Whoops for to add it to the description. Just updated, check description 👍🏻
@happyfox7112 жыл бұрын
😎👌 great vid. Tnx 4 the upload
@raiyanchowdhury93312 жыл бұрын
Can you pair the module with any remote key? I want the OEM key but need the module. Shouldn’t it still pair with that procedure?
@hypno61642 жыл бұрын
I have the same question
@senorvac32282 ай бұрын
It won't pair unless you change the key module, which is a tedious process
@jadenmora965511 ай бұрын
Did you ever figure out how to get the hazards to flash when you lock and unlock I just installed the module and siren on my 98 m3 and can’t figure it out
@senorvac32282 ай бұрын
Depends on the model yeah, i believe it's programmable via the bimmer app through the obd port, or just tap a wire from the signal directly on the hazard switch wires
@Simon-op7qm11 ай бұрын
How did you hide the wire from the red button?
@senorvac32282 ай бұрын
Easiest way is just tucking it under the plastics and to help your self taking put the cubby under the climate controls so that you can take out the slot where he put it in the video
@josemosqueda40712 жыл бұрын
Hey does those remote would work on a bmw e36 325i obd1. If so would i need just to program it or would i have to get a obd1 control
@E36tyler2 жыл бұрын
Yes, you just need the correct module to be paired with it. You can run a late model system on an early model car as long as the fob and module are both late models.
@backnd_2329 Жыл бұрын
My car has that red button but the previous owner didnt give me a key fob does tht mean i have keyless module im curious to look now
@E36tyler Жыл бұрын
Yes, your car should have the module. You can pull the glovebox and it should be there behind it.
@backnd_2329 Жыл бұрын
@@E36tyler just looked sure do have one recommend of wht fob i should get?
@E36tyler Жыл бұрын
@@backnd_2329 you can either source OEM or buy one from Msportparts.com www.msportparts.com/collections/electronics
@1stock3610 ай бұрын
Same
@backnd_232910 ай бұрын
@@E36tyler ngl this never worked i think the module is dead or the sensors😂