Traveling to Tropical Places ,Fishing ,Free Diving ,Cooking my Meals in my Small 21 feet Crooked Pilothouse Boat, Discovering New Places ,Sharing my How to Upkeep My Boat Maintenance and Sharing this trips with you my Viewers
Пікірлер: 107
@johngranato26736 ай бұрын
That's exactly the way I did my installation---decades ago. Tight lines and good fishing, Skipper!
@OutOnTheReef6 ай бұрын
Thanks cap. And hopefully they can last longer then the old ones 👍⚓️🛥
@johngranato26736 ай бұрын
@@OutOnTheReef Yep
@riverakers6 ай бұрын
I think the lights look better without the cover.A much cleaner install and better coverage.Good job!
@OutOnTheReef6 ай бұрын
Yes i agree and no future rust cap.👌
@nosurfenougheddie6 ай бұрын
Looking good Cap! When I know I'm going to use a sealant around the fixture I like to use tape and tape off about an 1/8 on an inch away. Mount your fixture, smooth out the sealant squeeze out, then pull the tape. Makes a perfect sealant line around the fixture and no mess.
@OutOnTheReef6 ай бұрын
I needed to do that cap. Great suggestion 👌
@tubeguiller0076 ай бұрын
No silicon in the holes of the screws before, good choice in putting some now and putting a bit on the top of each screw! Fantastic! Can't wait to see in the near future these lights, installed in my favorite best equipped adventure machine. Thanks a lot, Cap. Props Clear!!! Let's go!!! Merry Chirstmass for you and your loved ones and for sure a happy new year filled with blessings and new adventures.
@OutOnTheReef6 ай бұрын
You are awesome buddy thank you and yes having silicone cover the screw is extra protection for the lights from rust ,thanks for being a awesome viewer of my channel for this past year cap. And from the Crooked pilothouse Prop Clear !!!
@bdwillis82846 ай бұрын
Looks great and good thinking on the covers. Looking forward to seeing them in the water.
@OutOnTheReef6 ай бұрын
Thanks cap. And soo i will show them to you ,thanks for watching 🛥⚓️👍
@andrewfyakim5256 ай бұрын
Hi Capt.... nice, clean installation...I look forward to seeing how they shine in the clear Bahamian waters!.... I was surprised to see how thick your transom is. I've not yet drilled any holes in my transom (it's about the only place I haven't drilled!), but after seeing how nice yours look I might add this project to my 'to-do' list.... but then, that list is long enough already! ☺
@OutOnTheReef6 ай бұрын
Hello cap. And the light can help you at night fishing specially if you are shrimping at night and im sure you will do a better job cap. Thanks for watching ⚓️ 👍👍
@hookednrolling20096 ай бұрын
Very good and clean mount. Now you will be able to see all the mermaids swimming around looking for you. Wait wait wait I mean All the fish swimming around the looking at you lol Capt Crooked JT 🇺🇸🇺🇸🐟🐠🎣🌴
@OutOnTheReef6 ай бұрын
Lol cap. My wife will break them with a hammer if ahe finds oul😁👍⚓️🛥
@jeffreypinder93986 ай бұрын
You're going to blind the fish...🤣 Nice job, Captain.
@OutOnTheReef6 ай бұрын
Lol 😁Thanks cap.
@jakeroth58096 ай бұрын
Another nice project Capt I agree with you no guard I can t wait to see how they look in the dark of the ocean.
@OutOnTheReef6 ай бұрын
Thanks cap. And soon i will show you how it will look on the water and thanks for watching cap
@wu37055 ай бұрын
Very nice Cap. And if you are out at night and there is too much light shining up out of the top you can always put a piece of black electrical tape over the top half of your leds to keep the light from being too much at the top. Electrical tape is easy to remove for a temporary light adjustment. I hope you catch the big one!!!
@OutOnTheReef5 ай бұрын
Greatvidea cap. I will keep that in mind, thanks 👍⚓️
@alfonseca92846 ай бұрын
Nice job Cap, Looking forward to the next trip!
@OutOnTheReef6 ай бұрын
You and me both! cap. thanks for watching and see you in the next video cap.
@blockerrolle6 ай бұрын
Great job capt, clean installation, but I think the metal shields is for added protection on the fixture itself & screw holes when tightening, just my thought, like always great job & keep the videos coming, complements to the season.🙏
@OutOnTheReef6 ай бұрын
Very true cap. But so mutch silicone that light is going nowhere, thanks for watching and see you in this new year cap.
@SHOE536 ай бұрын
That a nice upgrade Cap can't wait to see it on your next trip.
@OutOnTheReef6 ай бұрын
Thanks cap. I hope i can get more out of these ones, soon i will show you how they look 👍👍
@badfrog2516 ай бұрын
Very nice
@OutOnTheReef6 ай бұрын
Thanks cap.👍🛥⚓️
@jasonmaddox2916 ай бұрын
I just wanna to thank your for what you do..
@OutOnTheReef6 ай бұрын
Thanks cap. I love to share the little that i know and thanks for being part of my channel cap
@roadtraindrivingwithtonyivanq6 ай бұрын
Thanks for your video Cap! I was just about to install the same lights on my boat and definitely I will throw away the covers.👍👍
@OutOnTheReef6 ай бұрын
Awesome cap. They will look more transparent 👍🛥 thanks for watching cap.
@stevewoody636 ай бұрын
I have a pair of these and it was a great tip about leaving the stainless off, when I install them I will do the same, cheers Capt, Have a great Christmas and New Year
@OutOnTheReef6 ай бұрын
Thanks buddy and yes is better lighting without the shield and no future rust👍👍⚓️🛥
@Paul-bc5vi6 ай бұрын
Good job captain, I second deep blue channel, the only light I would install are the lumitec. They truly are some of the best also.❤ keep safe, prop clear
@OutOnTheReef6 ай бұрын
Hello cap. And yes you both are right but the price was way too high 😢
@brianmcnulty9666 ай бұрын
Hi cap. Do you have a video showing how you wired these lights? I’m looking to re-wire my 20 yo Edgewater 265 CC. I like your channel because of how thorough you are and it seems like you aren’t afraid to try new things. I currently have a breaker panel aft with a starboard and port perko battery switch(1,2,both,off), and a blue seas on off switch for my house battery that was added later. I’ve had a couple windlasses added since the original and also a “new” chartplotter and Furuno fish finder, both of which need to be replaced. I don’t know if you’ve ever had any electrical work done by someone else on your boat, but I’m amazed at the foolishness that has occurred. Wires cut and not removed. No wiring diagrams. No labeling of wires. Splicing, no suspension of cables, lack of fusing, and on and on. I appreciate you cap. Thanks
@OutOnTheReef6 ай бұрын
Wow cap. Some previous boat owners dont think of future buyers and in my underwater lights the wire ringing eas tgere already but is not that difficult take the lights wire to a dash switch and take the power from the fuce bar and you will be ok ,thats the way i would do it and thanks for following my channel cap. See you on the water👍👍🛥⚓️
@Randy-vk7pj6 ай бұрын
Good job Capt!
@OutOnTheReef6 ай бұрын
Thanks Randy 👍
@robertovalls6 ай бұрын
Nice clean job and Happy Holidays to you and your family!
@OutOnTheReef6 ай бұрын
Thanks so much buddy🤗 for this awesome year and you for being part of my channel cap.
@Picasofly6 ай бұрын
I agree with you on the look and functionality of no cover. In Texas we have lots of floaters in the water from the rivers. I wonder how much strengthe the covers give the lights if you accidentally back into a submerged log. Just a thought.
@OutOnTheReef6 ай бұрын
great point cap but in the Bahamas or Florida Keys that would be rare , thanks cap. for watching
@dlk12554 ай бұрын
Looks great capt!
@OutOnTheReef4 ай бұрын
Thanks cap. I still need to try it on the clear water of bahamas to see how they look , Thanks for watching captain
@MooreFishing-ky3wq6 ай бұрын
Looking good !
@OutOnTheReef6 ай бұрын
Thanks cap. Ready for my next trio
@DeepBlueChannelCom6 ай бұрын
Capitan yo tuviera vendido las Lumitec que yo tengo a buen precio y cuando las encienda va a alumbrar hasta las Bahamas
@OutOnTheReef6 ай бұрын
Jajaja eso me gustaria pero son muy caras , estas me costaron solo $30🤣
@DeepBlueChannelCom6 ай бұрын
@@OutOnTheReef capitan solamente 350 las luces eso no es picada para gallo fino
@rolandvance66636 ай бұрын
Nice job 👍🏼👍🏼
@OutOnTheReef6 ай бұрын
Thanks cap.😉👍
@AdventuresofHappyOurs6 ай бұрын
Nice job Cap! I’m thinking of adding lights like that to my boat. What kind of silicon you use? 3m 4200?
@OutOnTheReef6 ай бұрын
great idea cap they look awesome at night and i use 5200 witch it was my mistake because is permanent , I should have used 4200 3m but hopefully they will be there lifetime lol cap, and have you use 5200 before ?
@mercurygm6 ай бұрын
Heat shrink Isn’t enough. Use double sided sticky tape. And then heat shrink. Then paint it with liquid tape.
@OutOnTheReef6 ай бұрын
Wow cap. That a better choice thanks cap.
@tomwintermute70266 ай бұрын
Nice job capt. On a different note, do you have a carbon monoxide detector on board? Although your generator is outside, we lost some deck hands years ago sleeping outside in calm conditions. I have a combo fire/carbon monoxide det. Take care
@OutOnTheReef6 ай бұрын
Hello, captain. Yes, I do a have a carbon monoxide and smoke alarm on board. Thank you for looking up for me, captain.
@bigbitebones6 ай бұрын
Nice job. Me gustan las azules.
@OutOnTheReef6 ай бұрын
gracias capitan y si se ven asul como el color del aqua de las bahamas 👍😉
@TR41N_OF_THOU9HT6 ай бұрын
Going to look good cap👍💫💫💫💫
@OutOnTheReef6 ай бұрын
Thanks cap i will try it soon on the water, thanks for watching ⚓️
@TR41N_OF_THOU9HT6 ай бұрын
@@OutOnTheReef nice, ill keep a lookout for the upload when you get back on the water. Happy holidays 🎄🎇🎄🎄
@perfectfitboating6 ай бұрын
Nice install Capt. We had underwater lights like those installed before we redid our transom. We’re looking to put new ones as well. Still not sure and which style, round or rectangular. Either way, if they come with a cover we will leave it off as you suggest! 🤙
@OutOnTheReef6 ай бұрын
awesome cap and this ones ware cheap, i did not wanted to go with the lumitek they ware to high price and as you know we are in a budget cap 😂👍👍😉
@perfectfitboating6 ай бұрын
@@OutOnTheReef budget boating cap! 😂
@OutOnTheReef6 ай бұрын
@@perfectfitboating boating or go broke 🤣👍👍
@christiewaters42636 ай бұрын
So I have a question about your ice maker that you use on your boat. How much water do you use making ice in a day and about how much ice does that make? Which one did you choose.
@OutOnTheReef6 ай бұрын
Hello cap. Is about 40+pounds per day, The small one that I had before. It was 26 pounds per day. So this one is almost doubled the production and it takes just the same amount of ice for water
@cmoore78216 ай бұрын
Lights look wayyy better. What happened to your grill Cap?
@OutOnTheReef6 ай бұрын
Hello cap. And the grill still there and thanks for watching soon i will try the lights on the water👍⚓️
@zanrenault18786 ай бұрын
Hi! I would like to ask you about the placement of your front underwater lights. I’m building a new boat, i have bought 2 transam lamps already but i am also thinking about to fit another 2 somewhere under the bow. Would love to hear your comment or suggestions. Anyway love your channel. Greetings from Slovenia
@OutOnTheReef6 ай бұрын
Hello, captain and I do not have underwater lights in the front. I just have a spotlight. Thanks for watching and hopefully you find your lights that you need.
@keithrose16 ай бұрын
Hey Capt. What software editing program do you use that works for GoPro and the drone?
@OutOnTheReef6 ай бұрын
hello cap. i use Adobe Rush cap.
@fungus47586 ай бұрын
Hello Capt. I'll be doing something similar at some point. I opted to go with IPX8 RGB LEDS. Just a suggestion, put a UV protectant on your LED to prevent it turning yellow from the UV rays assuming the casing wasn't made with UV protectant material. Most of the hardware stores that carry spray paint will have the clear UV spray. Or you can get a UV protectant solution and spray and wipe dry. If you go with the 1st option, I would still spray the solution on them every once in a while. Hopefully you used 4200 or the equivalent. Season's Greetings to you and your family. Cheers 🥃
@OutOnTheReef6 ай бұрын
hello cap i used wax on the lights that protects but yes i will get something to protect them thanks for the suggestion cap. and i used by mistake 5200 and i did not read it was permanent i should have used 4200 3m, i will have a rough time wen it comes to replace this ones one day lol 😂💪
@fungus47586 ай бұрын
@@OutOnTheReef Hello Cap, Good move with the wax 🤙 So long as you learn from your mistakes it's all good 😂😂😂😂 Hopefully you won't have to replace them soon. That 5200 will pull everything off with it. It works that well 🤣🤣🤣🤣🤣👊
@OutOnTheReef6 ай бұрын
@fungus4758 wow cap. I woul probably if i need to remove ot i would use a sharp blade so i dont jave to pull it👍
@Picasofly6 ай бұрын
@@OutOnTheReef 5200😯. Man. I have a t top and leaning post glued on with that stuff. Maybe the old fishing line trick will work to get them off when the time comes.
@fungus47586 ай бұрын
@@OutOnTheReef Not sure if that will work well. Let me know when you do. I'm thinking the blade will dull extremely quickly. Could always have a beer in between blades 🥃😎
@mangosrestaurant6 ай бұрын
Great idea! What is the brand of this lights?
@OutOnTheReef6 ай бұрын
Larianzs cap. And thanks for watching my channel cap👍⚓️🛥
@floridaoutdooradventures89816 ай бұрын
Good job captain! I have the same problem, one of my light ain't working! LOL... I may do the same, thanks for the great video! Tight lines! Can you tell me the brand, make and model of your new underwater lights, please? Thanks again, Cheers!
@OutOnTheReef6 ай бұрын
I got them at amazon and they are 29$ but they dont have a brand they are easy to find cap
@floridaoutdooradventures89816 ай бұрын
@@OutOnTheReef Thanks Captain. Are you happy with them? Do they light up well? How many lumens, please? Thx again.
@OutOnTheReef6 ай бұрын
@floridaoutdooradventures8981 i haven't use tem yet but soon i will
@robertrickabaugh33046 ай бұрын
There was no 5200 on the old screws?
@OutOnTheReef6 ай бұрын
no the manufacture screw up cap even on building my boat Crooked 😂
@DiegoCora-ek2cd6 ай бұрын
Hola capitán que luces compró, podría pasar el link por favor. Gracias
@OutOnTheReef6 ай бұрын
Saludos capitan as un serch en Google co esta informacio y te saldra por amazon, perdona amazon me probrio usar sus links, saluds cap : 2pcs Waterproof Marine Boat Lights, Stainless Steel 42LEDs Underwater Lighting Boat Transom Navigation
@DiegoCora-ek2cd6 ай бұрын
@@OutOnTheReefgracias
@robertrickabaugh33046 ай бұрын
Fill the old holes with epoxy, new screws with 5200. Silicone is worthless
@OutOnTheReef6 ай бұрын
great suggestion cap. thanks for watching cap.
@kounlavong74382 ай бұрын
What brand was the light you installed? Also what lumens?
@OutOnTheReef2 ай бұрын
Hello? Captain Amazon made me remove the links. Is it right now of my Head, I don't remember the description of delights. But I think I pay like thirty dollars in amazon for it
@pedrorafaelpoualicea34892 ай бұрын
what Brand is?
@OutOnTheReef2 ай бұрын
they are generic and have no brand cap but you can search them and they are about 30$
@francus72276 ай бұрын
I'll never do this. But..... I wanted to leave a comment. This is a comment. Thanks
@OutOnTheReef6 ай бұрын
Lol thanks cap. For taking your time to comment 👍🛥⚓️