Installing Nineo RGB Light kit | 2022 Kawasaki Ninja 400

[@benjaminmacdonald7656]

Not only does it look cool but I think it also makes you safer since it's catching people driving cars attention more than if it wasn't there.

[@BloodyPyscho]

Just wanted to say thanks for posting the video. Debating on doing this now

[@ShayUnbalanced]

No worries my friend. If adding a cool way to increase visibility is something you prioritize. I'd recommend doing it. Just take your time when deciding where to place them. Some people think the lighting looks good when youncan see them directly and it has a "glow" effect.

[@raymondclavo5396]

Really good install video I just put my order. Thanks you're a big help✊🏾

[@ShayUnbalanced]

Bro, I hope the install went well. How'd it turn out?

[@MichaelWilder-y1v]

The white wire is to connect to your brake lights. When you hit the brake, the lights will turn red. I just bought the same kit.

[@ShayUnbalanced]

What was your experience like, did you set it up pretty easily? I avoided splicing the white line for now due to law enforcement in my area really not liking "red" lighting on bikes or lights that changed color while the vehicle is being operated.

[@MichaelWilder-y1v]

@@ShayUnbalanced I spliced I to the brake line and it works great. As long as no lights are facing forward of blue or red your good in most cases. The bad is when they flash or are visible to the front. The process did take time for me. I did all the wires and tucked them. I will post a video later or attach a picture for you guys. One of the best light products I’ve bought in a long time.

[@ShayUnbalanced]

@@MichaelWilder-y1v cool man, I just might have to go ahead and do the same thing.

[@sagebiddi]

Ha ....I just got the same kit. I got lucky af and got a 06 concours with 4500 on it . But I have no fkn idea what I'm doin so I figured I'd try and get some tips and hints... Question: would it be okay to connect to the fuses? I don't know which wire is actually the one I should splice into ...BTW I'm I Ohio too bub !

[@MichaelWilder-y1v]

@@sagebiddi I would splice into the other wire on your brake lights. Trust me. I’m trying to upload a video so I can show you guys.

[@youcanthide004]

Looks great Homie, thanks for the video

[@ShayUnbalanced]

Thanks for watching brotha. I should really post more.

[@WilliamMcCary2409]

What o rings did you use for the battery?

[@plastoc696]

Hello ! First of all, thank you for your video. I have two questions: Can you give us the link to the led you bought? On the video, we can see that you turn the leds on and off manually with the remote control. Is it possible to make the leds turn on when you turn the bike's ignition on and off when you turn the bike's ignition off? Thank you for your answers and sorry for my English, I am French 🙂

[@scooterninja3479]

Thanks for the video, I just installed mine while following the video to see where you put yours. I am now trying to put the fairings back on, but the clips on the side fairings under the headlights are not clicking in place after I screw the sides in, did you have any issues like this when you were reassembling the bike?

[@Mista_MT07]

Great job dude! Sucks about you loosing your Fastners. Next time get a vid of you riding your bike with the lights on it.

[@ShayUnbalanced]

I'll definitely do that, I've also found an Amazon link to some decent fastners. It's my own fault for not respecting how important these parts are.

[@crystalsoape5727]

Thank you

[@BriNbigD]

Nice job! What did you decide about the brake light?

[@ShayUnbalanced]

I decided not to splice it into my break light. I just didn't want to run into any issues with the police here in Ohio

[@MTALPHAK1LL3R]

Just finish putting mine on you just wrapped the wires around the battery posts ??

[@ShayUnbalanced]

Nah, I wrapped them around some small "O'Ring Terminals" and then slid them down onto the batter connectors. It just felt more managed and convenient that way. How did yours turn out?

[@MTALPHAK1LL3R]

@@ShayUnbalanced I haven’t even connected it yet lol was too lazy after putting everything on

[@ShayUnbalanced]

@@MTALPHAK1LL3R 😄 it be like that sometimes. And to be honest, I think if you want it to look nice and have the cables be clean and organized. You'll have to take your time and apply them.

[@MTALPHAK1LL3R]

@@ShayUnbalanced I couldn’t get mine to work i crimped everything secured them to the battery bike turns on and starts so I know the powers good the remote works but the lights aren’t working any ideas ?

[@ShayUnbalanced]

@@MTALPHAK1LL3R awe man, I'm sorry to hear that. It sounds like maybe you got a faulty kit. If everything is hooked up correctly and it still won't work. Maybe reach out for a refund or replacement? Hopefully you didn't route everything through your bike already.

[@irfanmaulud805]

When you use blinker or brake it’s automatically turn on to orange and red?

[@ShayUnbalanced]

When you use the break it will automatically turn red but you'll have to splice the white wire into the break line.

[@jluv420]

How are the lights holding up? It's been 8 months since the install.

[@ShayUnbalanced]

They work just fine! still bright, the adhesive is holding just fine. Not one light has even started to peel off, I've ridden in the rain often. Absolutely no issues with these lights from my experience, they are cheap in price as well. They don't drain my battery too much either. I've left them on for a day and a half by accident and my battery didn't die.

[@jluv420]

Thanks for the response.

[@ShayUnbalanced]

@@jluv420 No problem Brotha, I don't post enough but I should definitely start posting again.

[@michaelepps7838]

Did you have any issues with the lights draining the battery?

[@ShayUnbalanced]

Only when I left them on for more than a day or two. I've had that happen because I forgot to turn off the lights and left on a trip and the battery was dead afterwards. But NO they have not drained my battery or caused me problems. I also have a batter tender installed so it's very easy for me to recharge.

[@sagebiddi]

I'm in Ohio too bub...I got a 06 Connie about a week ago clean af 4500 miles on it...I got the same kit too I'm just not sure which is the actual brake wire I'm supposed to tap into tho ...just trying to get some tips...and bruh we gotta be cousins or some shit cuz I'm literally holding the kit for a week now and was just watching TV and said that same shit...luckily my body panels all take a fat Phillips head so no issues needing Allen's...I'm just paranoid about messing up or bad placement...I kinda wish I had a Garage or prob gottawait till dusk so I can get a good idea of where I can even put em...heat is something else I'm scared of I had to snatch my hand last night cuz it was so damn hot...so now I'm trippin over that too. I wish I had $$ I'd pay someone to do it or at least help me ...but I also need to learn how to do this and much more maintenance. SIGH ANXIETY INDUCING

[@ShayUnbalanced]

Man, I understand the pain brotha! every time I start wrenching on my bike I feel that I'm about to destroy my motor mounts or jack up my wiring I do things VERY slowly for that reason man. I also feel you about wishing you had someone to help because I'm searching on youtube, google, and instruction manuals for all my information and it just feels so damn risky learning it for the first time. Did you get the lights put on the bike? If you did, how did it turn out, you like it?

[@edwxro4075]

Is this doable also on the ninja 2018 version?

[@ShayUnbalanced]

Sorry for the late reply my friend. This is doable on the 2018 also. For the most part, the Ninja 400 is a "2018+" model. Meaning that since 2018 to present. It hasn't changed much outside of fairings.

[@brad3201]

I’m also from Ohio and have ridden past cops countless times with my blue leds on and have never had any issues. Also is that the East 9th Street Pier?

[@ShayUnbalanced]

That's awesome man, im gonna stay away from those colors though. After speaking with the cops, they really seem to just play it loose and depending on who you get. They'll make a fuss over it. I've even seen them give out tickets over tread depth. It's so random bro. And yeah that's the same pier