Installing Vinyl Floor Tile On Cement Garage Floor / Basement Floor

[@mazerwholesale]

Peel & stick vinyl tile installation in garage video. 4 years later, every tile is still firmly in place and looking good.

[@SaltCityFab]

mazerwholesale Did you acid etch your floor first? I'm about to do this to my garage and I'm not sure If I should or not.

[@mazerwholesale]

I did nothing but wash the floor with soapy water and broom sweep it. I also filled in some cracks and imperfections with pre-mixed floor leveler. 4 years later, every tile is still firmly in place and looking good.

[@Msleelee9487]

@@mazerwholesale so I have a concrete garage floor that has a split I have a car on each side everything is flat all I have to do is clean it could I fill that split with that premixed floor leveler or is it split in half for a reason I always step on it and turn my ankle I don't want to just cover it for fear of messing the tiles ups over that split what do you think?

[@tatianamoya5716]

Hi, I'm installing this floor and I want to know what product is used to seal when the installation is finished, I appreciate if someone helps me

[@mazerwholesale]

@@tatianamoya5716 The tile does not need any sealer, nor is it recommended.

[@traciannveno]

I’m going to be using the vinyl plank stick downs in my room. I pulled the carpet and wondered how perfect the cement needed to be. I have a few glue spots to scrape and patches to do from the nailed edging. This video was wonderful for that info and more. Thank you very much!

[@GenoRL_]

I was hit by hurrican sany and my garage was hit real bad I went online and watched your video I am going to order the black and white checkered pattern...I loved your video you made it look so easy so I will try it..

[@Ryan4321]

he's good and realistic! other people act like you need to clean every last piece of dust off your floors and need to start in the middle! nice video bro!

[@margb63]

Thanks so much for your helpful videos! I watched this one, the one on how to remove this type of flooring along with the one about the temperature that the floor needs to be for installation. We bought our home in September 2018 & the basement has old peel n stick tile that needs to come up in 2 areas that are different patterns in each area & indoor carpet in another area. So watching your great video of how to remove the old tile & prep for the new tile taught me the best way to remove it. This video taught me everything I was looking for as to how to best install the new tile that is already on the way. Thanks again for making all the videos so helpful!!

[@mazerwholesale]

Thank you for letting me know how much the video helped. It's really nice to know! Good luck with your house and your projects!

[@knoonan3870]

My husband layed sticky tile on our basement floor over the weekend. It's popping up in spots. He only did a small area to make sure we'd like it. My dad said that the floor is too cold. Should we put a heater on the concrete before we continue? Or do we need to wait until the weather changes? We wanted to get this done during the winter months.

[@mazerwholesale]

Thank you for your comment. I have never needed to use that tactic, but it makes pretty good sense. I would go with the hair dryer because I'm sure the heat gun could be too hot and compromise the tile. Thanks for sharing!

[@Talletc]

I just did this on 400 square feet in a garage. It looks FANTASTIC

[@joeqiao6843]

the black and white combination is beautiful

[@mazerwholesale]

+Joe Qiao Thank you for the comment. Please see some of the photos of completed flooring projects many of our customers have shared with us: www.mazerwholesale.com/photos-from-happy-customers/

[@mazerwholesale]

Thank you for your question. I would suggest you fill in the gaps of the expansion joints. The tile will sag into the spaces, especially when under the pressure of traffic. You can get floor leveler in premixed form and apply it with a simple putty knife. You'll need to give it at least a day do dry.

[@mazerwholesale]

Thanks for the comment. Our tile is not recommended for walls because the adhesive is not made for holding in the vertical position. We DO get many inquiries about that. Now we carry a wall tile in 4" x 4" squares, mainly used for back splash. We have a video on it.

[@mazerwholesale]

Great question. Thank you. I have personally had experience installing tile over top of a sticky surface from where we removed peel & stick tile. It worked out great. You SHOULD KNOW, however, we removed our own brand of tile and replaced it with our own brand. So the adhesive was exactly the same. While I can make no guarantees as to the compatibility with another brand's adhesive with the adhesive of our brand, I think it should be fine.

[@MajinGogeta900]

i was just wondering if the basement floor has to be comepletely flat to install this on it and if water after a rainstorm will affect the tile

[@sonofthe80s]

I have a painted concrete garage floor with some salt damage. I plan to patch the floor spots but leave the existing paint which I think is the latex variety based on wear evidence. Will this go over it? Is it slippery when wet? This looks like the right thing for me. I hope its within budget. I was dreading the nightmare painful and uncertain repaint - which ultimately fail. Plus I don't have the 2 weeks it'd take to paint my gar 1/2 at a time. I need a lay-down tile product.

[@mazerwholesale]

Thank you for your question. I have no doubt you'll be fine with the drips so long as you clean up. This tile is generally something you would use in a kitchen, bathroom, laundry room or foyer. I have (and lots of our customers have) used the product in far more demanding environments with much success. Tiles which may get damaged from abnormal traffic or chemical spillage can easily be removed and replaced with the leftovers from your original installation, making our tile a great choice.

[@robinrowe8025]

We used a hair dryer to heat up the Glue on the tile sticks better helped my sister do her front room and dining room . Black and white tile . On outside edge and middle black . Rest white came out pretty cool .

[@mazerwholesale]

Thank you for your question. There's no reason moisture should be a problem. When you install the tile, you'll position each piece to be tight against each other piece without spaces. That's natural because it will look terrible if you don't! I wouldn't expect anyone to let water stand on their floor either. If you're concerned about mopping, don't worry. Mop away. This will not be an issue.

[@mazerwholesale]

Thank you for your question. The surface you're installing on certainly must be dry before applying the tile. Once the tile is installed, moisture doesn't seem to be a problem. However, standing water should not be allowed. Just as you would mop up a spill on your kitchen floor, so should you keep the surface of the tile dry from standing water. Basements tend to be moist but have not had any negative feedback about basement application in the 12 years we've been selling the tile.

[@NCandHR]

Hey. I have a chalk line. It was one of the things of my grandfather's that I chose to keep. As well as c-clamps, a handheld planer. 🙂

[@s0n1c0r3]

Would this work for a barbershop floor

[@andrewmazer7400]

Definitely. We have served dozens of barbershops and salons. Here's a link where you can find the product mazerwholesale.com/product-category/self-adhesive-flooring/garage-floor-tile/

[@jeannebutterfield9412]

THIS SOUNDS LIKE A GREAT PRODUCT! MY BOSS WANTED ME TO PAINT THE CHECKER BOARD PATTERN ON HIS BASEMENT FLOOR, I ALWAYS RESEARCH OPTIONS BEFORE TACKLING A JOB AND I'M LOVING THE WHOLE PEAL AND STICK IDEA! ALTHOUGH IT MIGHT BE A LITTLE TO COSTLY DUE TO THE SIZE OF HIS BASEMENT BUT IT'S WORTH RUNNING IT BY HIM. THANKS FOR THE VIDEO. I'M SENDING IT TO HIM AND JUST MIGHT BE CONTACTING YOU FOR A PRICE EST.

[@mazerwholesale]

Thank you for your question. The tile has a high gloss and also a slight texture. It certainly can be slippery when wet.

[@mazerwholesale]

Thank you for your question. The tile will take the shape of the floor you lay it on. If there are any holes or cracks, the tile will ultimately sink into them. Also, if you were to spill a glass of water on your kitchen floor, you would clean it up promptly. If your basement gets water and it tends to remain wet, you will have problems.

[@mayjereys5803]

Hi! I would like to ask if the vinyl tiles will be affected if the floor gets cracked when there are strong vibrations from big trucks that pass by in our house? Thanks!

[@mazerwholesale]

Thank you for your question. No. I only cleaned the floor with soapy water and a broom. My garage floor is over 40 years old, not perfect and not super-clean. There's nothing wrong with priming the floor. One of our repeat customers swears by a product made by Henry's and she buys it at Lowe's. But again, my floor is still firmly in place, applied to an imperfect surface with no primer or sealer applied.

[@victorfonseca306]

Great video and I'm thinking of doing the same thing in my garage. Only concern is how slippery is this floor when wet. I mean in the garage its going to get wet and stay wet especially when it rains. Thanks

[@Daddychef-]

I, have a question. My concrete floor is a bit rough. Can I, use a grinder wheel to smooth it out and clean off the dust and maybe watch it off with water. Then put the vinyle tile on. Can that work?

[@task82]

Almost 10yrs have passed, how did it hold up mate?

[@andrewmazer7400]

Thank you for asking! It's now 9 years and 2 months and every tile is still firmly in place. But let me tell you what I did 1 year ago, and I'll also include a link to the video. Many people ask: "Can I use this tile to cover the tile already on my floor, or do I have to remove the old tile?" So, after 8 years, my garage floor was as good as new in the low-traffic areas and a little beat up in the higher-traffic area. It still looked pretty good considering we seldom swept the floor and NEVER mopped it. Hey...it's a garage floor! A few tiles took more of a beating than others and in this video, I demonstrate how to remove and replace a few tiles kzbin.info/www/bejne/aH64k2B3otR2nq8 . And in THIS video, I show how a new tile can be installed over top of the previous tile kzbin.info/www/bejne/fKSxqo2fnKeomZI . We sold that house 6 weeks ago but the new installation of Salt & Pepper had behaved just as the Black and White. We had 3 offers on the house in 3 days and sold it to one of them. Not saying it was because of the tile on the garage floor...but you never know!

[@task82]

@@andrewmazer7400 thanks for the comprehensive reply and for sharing those links. Wow, solid product to be hanging in there for so long and looks super simple to replace them if required. The slab in our garage isn't that great - cracks, etc. We will eventually replace the shed, but for the interim, looking for a cheap alternative to give the space a freshen up. This looks like a great alternative. Cheers :)

[@waynewhittle1473]

If installed on a garage floor, how well does it hold up driving/parking a car on it?

[@charlotteblinn3498]

What did you use for filler for holes?

[@mazerwholesale]

Henry's Floor Patch / Crack Filler. Home Depot sells it. Lowe's probably has a different brand and any hardware store carries a similar product. You can buy it in a quart-size can or a gallon and you can buy in powder form if you have a lot of cracks and holes to be filled.

[@mazerwholesale]

Thanks for your question. The tile comes with a high gloss finish and it's considered a "no-wax" floor. You may wish to use Mop & Glo which is designed to clean and bring up the shine on no-wax floors which loose a bit of luster over time. Looking forward to serving you.

[@coreenbossforbes4278]

Good afternoon what if your using it but it's not sticking what the next move to make sure it stick

[@NICKRITZER]

I used a granite looking vinyl tile for above a shower kit and sides..it actually turned out pretty cool and gave the bathroom a great look..used tile adhesive and then sealed every tile with clear silicone, (lightly applied of course)

[@mazerwholesale]

Thank you for your question. The floor should be at least 65 degrees. Think about applying sticky tape to something cold...it doesn't stick well. Same with tile. If you heat the room, it doesn't automatically mean the floor will warm up enough because the heat will rise. Test again before applying to the whole floor!

[@BHUFF]

great video I want to do this in my garage and wasn't sure i could do it. now i have a fall project

[@mazerwholesale]

That's awesome. I'm glad you liked the video and it has inspired you to do it yourself. Thank you for your comment.

[@pyrowipe]

How does it handle car tire scuffs and the weight etc? Is this a suitable Garage floor for parking and doing light work projects in?

[@MichiganRedsResinCrafts]

Let's say you lay your peel and stick vinyl tiles and then realize that a few here and there aren't quite as tight against each other as you'd hoped. Will a sealant help to.. Fill in those very small gaps?? I'm a first timer..

[@jeffreythebarak4212]

The two difficult parts I wanted to see must have been edited out or forgotten. How do you cut the edge tiles, and what do you do about the raw edge under the garage door?

[@mazerwholesale]

Cutting the tiles is simple. Simply use a razor knife (utlility knife) and score the back of the tile, then break it off. No need to cut all the way through it. One stroke of the blade with slight pressure is enought. As for the raw edge, it's not NECESSARY to cover it but if you want to, go to a hardware store where they sell vinyl/rubber runner. Apply adhesive (contact cement will work fot this) and overlapt the edge with the runner.

[@audreycooper2960]

would you be able to park your car on top of these tiles?

[@mbcalderwood]

Hi! Thanks for these great videos. How about me putting it over old painted concrete?

[@2004rsxify]

What would you recommend using to fill the expansion joints on a 2 car garage prior to placing the peel and stick tile?

[@BigpoppaKC]

How does it hold up against water?

[@mazerwholesale]

@briancase1972 Thank you for your comment. I've only had 2 or 3 complaints about the tile in the last 11 years and ultimately it was revealed to me that each one of the customers who complained admitted to using additional adhesive. Additional adhesive will almost never work and will void the warranty. If you buy our tile, please do NOT be tempted to use extra adhesive.

[@caasil8481]

First of, handsome dude, he he. Excellent video. I bought some tiles yesterday and I don't think I need any other help to lay them. Amazing that I'm probably on the other side of the world and can access this information.

[@mazerwholesale]

Well, first of all, THANK YOU for the complement! And 2nd, thank you for taking the time to let me know the video gave you the confidence you need to do the job. Best wishes. Please subscribe to this channel!

[@Venus-19]

Thankyou! You answered all my questions! And showed me a way to do this without all the things everyone else said u need to do this...everything i thort of u answered hahaha so thaaaaanks

[@mazerwholesale]

Thank you for your kind comment. I'm glad the video helped. I'm planning a new video soon. I will be laying ANOTHER pattern ON TOP of that tile. Subscribe to this channel to make sure you don't miss it.

[@silvertbird1]

13 years ago - I wonder how the floor is now. If I get five years out of my floor, I’ll be fine with it since really it’s just an extra space/storage area. This was helpful, thanks.

[@mazerwholesale]

Thanks for your question. Unless the paint is chipping off the floor currently, it will be fine. In fact, the painted surface is a very good substrate for the adhesive tile.

[@WaitingForOblivion]

This is a great look and looks like an easy way to achieve the look. Looking to buy soon for my new house. Would you recommend putting down epoxy to get a smooth surface if there are areas that are a bit rough? Would you recommend putting something over the tiles once installed to keep things from going into gaps or from coming up?

[@mazerwholesale]

No. Don't paint the surface. Clean it with soap & water. Fill in any crack, holes or expansion joints to make the surface smooth. Use floor leveler or crack filler for this. You will find it in any hardware store. A latex floor primer is also recommended. Lots of our customers rave about Henry's Bond Enhancer .

[@monicaberbert7351]

We have a brand new garage with a concrete floor, however, they put the lines in it for stress of cracking every 6 feet apart basically a 6 x 6 foot square...do I need to fill in these lines before laying the 6 ml underlayment then the vinyl adhesive plank flooring? thank you for any info.

[@tarynsanmartino8930]

How well do you think this would hold up in New England weather? One car garage under and does have some heat.

[@mazerwholesale]

Thank you for your question. YES. The tile will do fine with your New England weather. However, the time to install is when the outdoor temperatures are steadily between 65-85 degrees F. After you install the tile and the glue sets, extreme cold or heat will not affect the tile.

[@lplozada]

Thanks for the great video. This gave me the info I needed to replace our beat up floor with a fresh set of vinyl tiles. Also, it's great to hear a Philly accent after all of my years away from the city (military keeps me bouncing around...I never get to fish the cricks around the 'burbs anymore, ya know?)

[@mazerwholesale]

Hahaha!!!! Great stuff! Thank you for the comment but geez...I hope you got your tile from Mazer Wholesale. If not, you probably paid too much.

[@lplozada]

I like your style, man! Boy, I wish I could say that I did save money using your company, but I'm a victim of my old lady. She's the type that gets a wild hair up there and just goes with an idea. "Hey, I wanna rip up that ugly, old linoleum on the basement shop and put in a new floor!" What does she do? She rips up the old floor up on a whim, buys exactly *one* box of new tiles from the local big-box store (because, ya know, why measure the actual surface you need to cover when you can just guess?) and, for a year, never puts down the new ones. I finally took matters into my own hands and went to buy more but - you know it - the handful of tiles she bought were now discontinued. Into the trash they went. I had to buy a totally new set and sit at ~25% waste before I had made a single cut on the new stuff! I love her, but good grief...

[@miguelmendez697]

Good night some glue that you can recommend to me please to do this same work. Thank you.

[@bradsheppard6407]

your video explained everything so great! where can i order mine!? can i get red and black of this brand? can you guys help me to find out how much i need, i have a 2 and a half car garage. thank you guys!

[@mazerwholesale]

Thank you for your comment and question. We will have RED tile sometime in July. You can pre-order and get 10% off. Here's the link to the Red mazerwholesale.com/shop/garage-floor-tile/solid-red-floor-tile-self-adhesive-1-5mm-12x12-80-sq-ft-copy/ and here's the link to White mazerwholesale.com/shop/garage-floor-tile/solid-white-floor-tile-self-adhesive-1-5mm-12x12-80-sq-ft/

[@mew10521]

do you need to use a primer afterwards?

[@mazerwholesale]

Not quite sure what you mean. The primer (bond enhancing primer) is good for a bare concrete surface before you install peel & stick but it's not always necessary.

[@AKUMA2Ten]

Seems easier than painting the garage floor. May go this route instead. Thanks for the video.

[@mazerwholesale]

Thank you for your comment. I can tell you it IS easier than painting. Please see some of the photos our satisfied customers have submitted www.mazerwholesale.com/photos-from-happy-customers/. We sell this product with confidence every day. For the price and ease of installation, I don't think you can make a better, or more economical choice.

[@HoboCabbage]

I was doing my bathroom floor edges like you were till i saw a video on how to do it. You can place a tile directly on top of the full tile before the partial tile gap. then take another tile and but it up against the wall, and where that tile overlaps the other tile you laid down you draw a mark or just make a cut. This helped me very much because my walls are far from square so all my cuts were on a slight angle

[@MikeDylanWells1968]

there is a sealer they put over vct..but here is a question..with a big area they have control joints cut in....what is your advice to cover over these....obviosly there is nothing to hold it up from getting pushed in the crack by the weith of vehicle?

[@mazerwholesale]

+mike wells Thank you for your question, Mike. Those joints can be filled in with floor leveler.

[@kemalredzic9865]

Hi, is it hard to peal off those tiles when we want to do something else with the floor?

[@mazerwholesale]

The removal of this floor tile requires work. the best way to do it is by using heat from a paint stripping heat gun. A hair dryer will work too but it takes much longer. It will probably also leave a residue of adhesive.

[@kemalredzic9865]

@@mazerwholesale thank you very much

[@mazerwholesale]

That's a great tip. Now you know I'm not really a "handyman" and that was one of the major points of the video...ANYONE can do it! I'm a pretty good salesman and I love my business but I'm really not very handy. Thanks for your comment.

[@Fashionlover250]

Beautiful ... one question in winter how this tiles stand with harsh weather like car tire fill of snow or water ? Plz reply I am planning to do this in my basement laundry room concrete floor.

[@mazerwholesale]

Thank you for your question. The cold temperatures don't affect the tile. However, when you install the tile, the room and the floor should be over 60 degrees F. As for snow: I tell all my customers to think about your tile as if it were a kitchen floor. If your floor should become wet from a spill or a leak, you would clean it up not not leave standing water. Our tile is naturally water resistant being vinyl but it's not a miracle product. Floors aren't supposed to be submerged in water. Likewise the salt you may bring in from the roads in winter is corrosive and abrasive. There's not a surface in the world which will not suffer from grinding salt into it. In winter, you may want to put some rubber matting on the tiles your car tires touch. They will always drive over the same tiles.

[@AndrewMazeraka-Maze]

Thanks for your question. No. We don't carry the tile in red. At least not right now.

[@rayamundson8394]

I am sure the directions on the back of the box says you NEED TO prime the floor before you lay ANY tiles. 2:41

[@mazerwholesale]

I have complete confidence the tile will adhere to you surface after repairing the damaged areas. The tile is very glossy, it CAN be slippery when wet. However, salt will be unkind to the surface. You wouldn't wear your slushy, salty snow boots in your kitchen and grind abrasive material into your floor....it wouldn't be good for the floor. Car tires will be driving over the same tiles all the time and that makes it easy to replace the occasional corrupted tiles so it IS a cheap alternative.

[@zetapsicq]

How do the tiles hold up with a car driving up on them?

[@mazerwholesale]

Thanks for the comment, Ryan. I'm trying to demonstrate here that you don't need to be a pro to lay the peel & stick floor to get great results. True, the better the preparation, the better the results. It IS true, I'm no mechanic! But the floor here in the garage came out great and it's now about 15 months later and not a single tile has peeled up or shifted.

[@corvette25hi]

Do you also have the red?

[@mazerwholesale]

Thank you for asking. We are going to have Solid Red and Solid Orange sometime in September 2021

[@NICKRITZER]

I wasn't sure if the ones I bought at home depot were for vertical use either but none of them have fell off yet! :p lol..plus the adhesive i used was pretty strong stuff!

[@chybaker1008]

I'm strongly considering doing this in my guest bedroom. I'm sick of carpet and would like a cheaper alternative to having hardwood flooring professionally installed. If I chose to purchase these self adhesive tiles, how easy would it be to remove them 2-3 years from now?

[@mazerwholesale]

Thank you for your question. The tiles do not come off easily.

[@tomtidd4128]

Thanks for the great video! My garage floor has four sections with a groove between each section. How do I handle the tile over the grooves?

[@mazerwholesale]

Sorry for the delayed response. I was not aware your question came in. The grooves must be filled in with floor leveler. If not, the tile will sink into them.

[@55nakdog]

Do you carry red and white checkered similar to the black and white you installed?

[@mazerwholesale]

Thank you for your question. I do NOT park my car in the garage so I can't tell you first-hand how the tile holds up to a car. I CAN tell you many people have purchased in who do and I never get any negative feedback. This tile is made for interior residential use but I've experienced it serving in much more demanding applications. I'm sure tire scuffs won't be a problem. The high gloss finish is highly resistant to dirt and is easily cleaned.

[@karenolson5556]

Do you Sell black/White checkered linoleum??? I need it in my living room. And do you have 8 inch squares? I think the 12" squares might be too big of a square in my living room.

[@peterpowers4851]

How well would these hold up to studded tires?

[@mazerwholesale]

I honestly don't know. But I have never had a customer tell me the tires are beating up the tile.

[@zari114]

Excellent video and good, practical tips! Greetings from Mexico City!

[@medilynquiatchon2920]

How long or year, (estimated) it will last a vinyl tile?

[@mazerwholesale]

Thank you for your question. How long it lasts depends on the traffic/punishment the floor takes. In my garage, the high traffic area started to show wear in about 3 years but we NEVER TRIED to keep it clean. The dirt that comes into a garage is abrasive. With sand and dirt grinding down on it under foot, car tires, trash cans, bicycles, etc. it will wear faster, of course. The areas which don't get as much traffic stay looking new indefinitely.

[@pcrepairguys]

Its 12/2024 and this tile is only $7.50 a box of 20! Wonder how it's holding up now.

[@Stalkervette]

Great video! I had alot some questions which you anwsered perfectly. I am also doing my garage with the checkerboard pattern and using the same nexus black and white tiles. I was thinking of using some cvt adhesive lightly on the floor to give it that extra hold but you said it is strong as is. So i guess i won't need to buy the adhesive. You started from the center but i'm going to start from the front of the garage so its all full squares and not cut. What would you recommend to use as a transition where the tile ends at the front of the garage. I was thinking of running a strong black caulking along the edge.

[@andrewmazer7400]

The warranty on the Nexus is void if you park a car on it. We have a product which is almost exactly the same but it does come with warranty for parking a car on it. My floor is Nexus but I don't park my car in the garage. Next month (April 2018) it will be 7 years since I installed the tile. There are a few chips in the front where the tile stops at the door. Not a big deal. Adding a bead of caulk might work...not sure. You could also consider buying a strip of rubber or vinyl and glue it. Every one of my Nexus tiles are still firmly in place. I can't imagine they would suffer from the weight of a car, but I don't know for sure.

[@Stalkervette]

Not really worried about warranty anyway. i will be parking cars on it. I have already ordered 10 boxes of white and probably next week ill order the other 10 of black tiles. I'll look into what kinds of rubber strips or something similar might work also. Thanks!

[@andrewmazer7400]

Where'd you order from? We've got the best price!

[@Stalkervette]

got 10 boxes of white nexus for 139. tax included and free shipping to store which i'll be picking up next week.

[@andrewmazer7400]

BOOOO...we're at $7.20/box + shipping. We're probably cheaper even with the shipping....and we ship it to your door. Depends where you're located. What's your zip code?

[@joeSmashman]

Can this work for a epoxy floor in basement?

[@mazerwholesale]

Thank you for your question. Yes. SO many of our customers have come to use because they're tired of looking at their failing epoxy-painted floor. Although I have never tiles a painted floor, hundreds of our customers have. It's important to remove paint which is bubbling or flaking, but the tile generally sticks well to the paint which is in good shape.

[@sushiegirl]

Love your product gorgeous guy 🥰

[@mazerwholesale]

You might be my biggest fan, Sushi Chick.

[@sushiegirl]

@@mazerwholesale hihi too funny 😂🥰

[@mazerwholesale]

Some more videos are planned. Have you subscribed?

[@sushiegirl]

@@mazerwholesale yes I have, can’t wait 🥰

[@MrComanche87]

Thanks for the video. You motivated me to do my basement floor!

[@JM-nh8yp]

chalkline or other guide would be nice to get it straight/square with the walls

[@marxnutz]

As a precaution, I had a homer bucket filled with water I could place on any tile to put pressure on the adhesive.

[@sherinagirardi2286]

Just got my tiles, and it say not to lay floor on radiant heated floors. Why? Will it make the glue dryout, or the floor tiles melt? Its not like radiant heated floors get that hot, just warm Please let me know if its ok to still put these tiles down. ASAP

[@lonnienoble3382]

how did these tiles hold up for you?

[@mryan750]

Very informative, and a sharp looking finished product, thanks!

[@gopinathhazari6968]

Is it available on amazon

[@mazerwholesale]

No. We sell it on our website. Here's a link mazerwholesale.com/product-category/self-adhesive-flooring/garage-floor-tile/

[@ravisha76]

Is this available in India?

[@gregstickels5706]

It seems to me that starting in the center of the room will result in equal cuts on the opposite sides of the room. It will result in twice as many cuts as compared to starting in the corner. At the same time, if your room is not square, starting in the middle will assure that our tile is straight.

[@magedgirgis1096]

Hi What's happening if I paint the Garage floor before I put the Vinyl ?

[@mazerwholesale]

I appreciate all comments and this one is no exception! I will take it as a compliment. Yes, I am married. I hope you will give this video a "thumbs up". Thanks!

[@tommyrox]

I've been researching flooring for my garage and this looks perfect...thanks. I'll post pictures when it's complete. Can you recommend a floor polish to increase the shine?

[@lonnienoble3382]

did you install this tile and if you did how is it holding up?

[@mazerwholesale]

Thanks for the question. No, we only sell vinyl tile. No sheet goods.

[@elCHAPOfehr]

can you ship to Canada ??

[@Skandamayuracollections]

Wr these products are available

[@chippbabe]

I was told the floor had to be sealed before I could lay tile on concrete. Was your floor sealed prior to placing the tile down?

[@kente99]

I would like to just document my experience with these tiles. It may not correspond to anyone else's experience and I'm not trying to post a negative review. The people at Mazer have been communicative and have attempted to be halpful. My installation was on an epoxied garage floor that was in pretty good shape but ready to be renewed. I cleaned the floor thoroughly with a pressure washer and filled in gaps and spauls with a concrete mix. We then proceeded to install most of the tiles. The adhesion was poor to nonexistent. The tiles bubbled up around the edges and can be lifted up with just a fingernail It is almost as if the floor repels the adhesive. I talked to Mazer about this and they recommended drops of superglue around the edges and I tried that but it just bonded in spots and isn't really a solution. I am now using a 3M spray adhesive and it looks like that may work but it will require me to pull up all the tiles and spend many hours to fix the problem. They claim that this only happens in 3% of their cases and I have no reason to doubt that but I would recommend that if you want to use this product you might want to buy just one box and try it out. The product is heavy, and even if Mazer was willing to give me a refund (which they aren't), the shipping cost to return them would be prohibitive. The tiles look great and they are staying in place with the cars driving over them but i don't know how long they will stay in place, what will happen when it gets cold in the winter, and the bubbling around the edges makes the installation look cheezy.

[@MustangGuru]

How resistant is this to Hot tire lift?

[@mazerwholesale]

No customers have ever reported their hot tires affected the tile. We have been selling the tile all over the country, including Florida, Arizona, California, and the cold states of the Northeast. Once the tile glue has cured (about 24 hours), it's a done deal.

[@tarlach1280x960]

Unless you're doing burnouts with your car before you enter the garage your tires should not be that hot

[@moisesflavia4453]

How much is the WEIGHT of the 12″ x 12″ Black Self-Adhesive Vinyl Floor Tile,. The 20-Pack.

[@mazerwholesale]

I'm awfully sorry for the delayed response. One box of tile weighs 10 lbs.

[@FKnATOO]

Looks great, might have to do my tint shop with this stuff.

[@mazerwholesale]

Too bad you didn't get your tiles originally from us. We never had a customer with a problem like the one you're describing...12 years running!

[@mazerwholesale]

@zetapsicq Although I've tiled my garage floor, I don't use it for my car. However, we've had dozens of customers who have. One customer reported peeling of a tile which is directly under his tail pipe and another told me he had to replace 2 tiles over the course of time. So holding on to whatever is left over from your initial installation is a good idea.

[@aarong8633]

How will this hole up on a high vehicle traffic industrial auto ship garage

[@mazerwholesale]

Thank you for your question. This material is not for high automobile traffic. It's for basic parking in a residential garage which generally experiences in-out once or twice a day. It's not a commercial tile product. We DO have something new coming soon.

[@aarong8633]

mazerwholesale we are opening another location 1200 sq ft garage bay and want something that’s going to be cheap look good and last long with little clean up... we do professional auto detailing and spray bed liner (in a spray booth)