Very, very long explanation somebody else else did it in 15 seconds never get this time back
@quincam267715 күн бұрын
Thank you very informative
@cbrown392920 күн бұрын
Thanks so much for explaining this. I don't know why same brand makers-(specifically Mainstays in my case) couldn't have made their cordless blinds to fit in the same (already mounted) fixtures as the corded - they are close, but no go. They have also adjusted the blind widths, so you won't get the same width as your old blinds (despite what the box says) - I've tried up and down by an inch and they are still off. They could have saved a us lot of work. Thank You Again for This!
@zemmollilee671524 күн бұрын
It's been 3yrs I see and still no answer on the name of the tape.
@_Justinriceism_29 күн бұрын
Its amazing how hard this info was to find. No one else gives the actual measurements as to what fits. Thanks!
@Orlanzepol123Ай бұрын
This is BS . You never showed how to cut the metal tubing with scissors or anything else for that matter.
@craigdwilliaАй бұрын
That worked great. Now the shade has the opposite problem. It won’t stay down. When I pull it down, it won’t stay down. Like it isn’t catching on whatever it’s supposed to be catching on.
@proudbirther1998Ай бұрын
Thanks! Great Demonstration!!
@AquinovАй бұрын
Thanks Andrew!! That was quick 😂😂
@anokamo5769Ай бұрын
I have a question is it ok to use peel & stick vinyl plank on the stair?
@tsfurlanАй бұрын
What about a shade that won't stay down?
@LunarsightАй бұрын
Thanks - this was very helpful. My old privacy blind had no tension at all, and I was able to fix it using this. It seems like the shade doesn't want to stay down - it doesn't always lock into place when I tug on it. Is there a quick fix for that, or is that the sort of thing you'd just replace the shade to correct?
@patriciacenter7839Ай бұрын
Great help work just as you said thank you
@Orlanzepol123Ай бұрын
He never cut the metal tubing. When did he cut it to adjust the size ?
@ber1285Ай бұрын
What about backspace grout lines
@AngeljosetorontoАй бұрын
Amazing ! Thanks for the tip !
@EmmaqueenjackАй бұрын
How can i get it were in Nigeria and the cost price
@andymerchant47762 ай бұрын
Spring always releases when I take blind out 🥵🥵
@MW-yr6zf2 ай бұрын
Thanks, that was so helpful x
@KFlei3332 ай бұрын
3:10 the tutorial starts. Thanks for this video!
@russwilliams53372 ай бұрын
… or use a wallpaper steam for similar results and bigger heat coverage
@krisclinton-wd3ib2 ай бұрын
Why won't my window shade stay down
@teresaa26102 ай бұрын
Excellent video, thanks!
@tanyab23492 ай бұрын
Very knowledgeable video. Thank you.
@donnatrimm28852 ай бұрын
Where did the metal go? The metal rod!?
@Orlanzepol123Ай бұрын
@donnatrimm2885 We are not crazy. He cut the vinyl and he cut the slack which goes in the bottom sleeve. But he never cut the metal tubing. That’s why when he said in the beginning that it can be cut with ordinary scissors I thought “ I got to see this”.
@stijill2 ай бұрын
Goo Gone's PH is 10.5. I thought vinyl tile cleaners are supposed to be PH neutral 7.0
@RachelHuiet2 ай бұрын
Thank you for that, I've been agonizing over 34 or 35 in for my window that the current ones I want to replace measure at 34.5 and it was driving me nuts!
@silvertbird13 ай бұрын
13 years ago - I wonder how the floor is now. If I get five years out of my floor, I’ll be fine with it since really it’s just an extra space/storage area. This was helpful, thanks.
@lawrenceharrod3 ай бұрын
Thanks Brother. 💯
@ThetaGrace3 ай бұрын
How about replacing the tiles?
@jimswordsnchords17593 ай бұрын
Excellent explanation. Thank you.
@cindibarber33543 ай бұрын
Thanks so much for this video. It worked perfectly!!!
@elizabethhallowell51153 ай бұрын
Won’t heat. Gun assist with removing paper back?
@elizabethhallowell51153 ай бұрын
Andrew- are Armstrong Self Stick the best brand ?
@khalidabakr47293 ай бұрын
Thanks so helpful!!
@alexcamarillo21663 ай бұрын
can i put boba hard surface floor polish?
@davidrosen18673 ай бұрын
Really appreciate the video. I have 3 windows on the same wall and i can never get the 3 shades to stop at the same height. I can usually get 2 to be at the same height but the 3rd shade will be a half inch higher or lower. Would like to get them all to the same height. Any suggestions? Thanks you!
@thomasbogardus71003 ай бұрын
so far put first down with adhesive it is staying in place all the otehr tiles are just barley sticking to the floor. think I may need to use added adhesive. I thought peel and stick would work but it seems it needs heavcy object on it or a while to even stick. I thought it was supposed to be simple. That seems to be a lie from my experiense.
@bally16644 ай бұрын
Thanks so much , I was struggling half day trying to figure this out.I have got 29 blinds to do.Thank you so very much.Your trick worked like a charm.
@craigdwillia4 ай бұрын
My problem is , I’ve unrolled it all the way and, no matter what I do, I can’t roll it by hand and have it roll straight. It always goes off to one side or the other.
@phubblewubbphubblewubb4 ай бұрын
You absolute star!! I have a really old one of these blinds and recently I thought I was going to have to go through the nightmare of replacing the entire thing....not anymore! Thank you so much from England.
@michellecrumrine58234 ай бұрын
What can i put on the grout to make it stick and level to put peel and stick on wall what will adhere to grout and make it hard
@luismarcial14084 ай бұрын
Yessss!!!
@hmmmhmmm83274 ай бұрын
what is the brand name and model for the fist tape?
@patrickpruchnik83894 ай бұрын
Thanks. Just what I wanted to know.
@badbob-bk3qn4 ай бұрын
Very well done, I'm sure u have helped many more ppl than u know. I didn't know about either 1, so ty.
@dianeruiz43014 ай бұрын
Thank you so much Andy for showing me how to take out tires I was having a hard time trying to do it without nothing and those 2 simple items Well it's great Thank you
@Rebelmusedesign4 ай бұрын
How can you get the adhesive off the ceramic tiles if you decide to remove the linoleum square stick on tiles later?
@brenten62264 ай бұрын
Thank you for the informative and easy to follow video. I'm a disabled female who lives alone, and I just put 2 tear to size blinds up by myself in about 10 mins. The wall brackets were already hung from the previous blinds, so all I had to do was measure, tear off what wasn't needed, readjust the rod, and hang them up. I had no idea when I bought them how to adjust them, but your video helped a lot.
@debrazawacki9234 ай бұрын
Baking soda neutralizes the glue-- it works wonders. NO SMELL NO ODOR --