Sick videos guys, I just got a lancer and it helps to see home builds on it. From Canada 🤘🏽
@BTBAB5 ай бұрын
Just used this video to wire in Vlands on a UK 1.8 Lancer. Thank you so much, couldn't have made a more helpful video
@bazilkhan6130 Жыл бұрын
That white lancer build is looking clean im gonna need to find all those vids man
@velonies18 сағат бұрын
why doesn’t my break light go all the way across only half?
@Andi.E2 жыл бұрын
hey guys i followed your guide but something seems to be off on my lights somehow only the outer right one is on the rest only turns on when i use the blinker .... help
@sboys2 жыл бұрын
Try moving your wires around you might have plugged one in the wrong way
@christophergopeesingh5967 Жыл бұрын
Do these come with daytime running lights or only works with the light switch ? Also anyone else having an issue where the reverse lights cut off after a few secs even when still in reverse ?
@_Sakura_Neko__3 жыл бұрын
wow! these taillights look so awesome!
@StepBroNate7516 Жыл бұрын
I have a 2011 mitsubishi lancer GTS and I put in these tail lights today, I can't get the left blinker to work and it makes the blinking noise very rapidly inside the car when I do the left side . Also I was wondering, the bar for the blinkers go across the trunk tail light part as well does that mean the blinkers should go across all of it or just the outside part
@israeljuarez20372 жыл бұрын
Would it fit on a 2009 Mitsubishi Lancer gts?
@sboys2 жыл бұрын
Yes they should work
@BlewVr9 ай бұрын
I got a problem. My turn signals are hyper flashing and i have no idea why. But the hazards work tho
@vertal5387 Жыл бұрын
are these the smoked or blacked out??
@arkgaming75913 жыл бұрын
Love those taillights!!!
@sboys3 жыл бұрын
So do we!!
@xavierthegoat16239 ай бұрын
I’m having troubles trying to find a good exhaust for my lancer what set up do you have ?
@PolloCustomz3 жыл бұрын
I got the red housing version I still wanted a taillight look as I didnt like the all blacked out look but I loved them wiring was kinda difficult but not too bad
@sboys3 жыл бұрын
We love them all! They are a great choice!
@haedenadams12162 жыл бұрын
i have similar lights to these, same three wires. except i have one extra wire for the turn signal. which exact wire would i connect it to?
@austinhess95652 жыл бұрын
You're the realest. 🤘 Thank you so much!!
@rio20d3 жыл бұрын
looks like the vland taillights here comes with a resistor, I saw another youtuber with Vland tail lights but without resistor, then he started to have problem, like his reverse light and rear view camera keeps cuting out when it's on reverse, he then made another video with resistor added and the problem solved.
@justinemlet91053 жыл бұрын
Are you running a tuner on either of the lancers
@sboys3 жыл бұрын
Just a chip, going to be tuning this summer!
@kushanperera6994 Жыл бұрын
Anyone had issues with cruise control and ASC after installing the lights?
@secretvanityx5690 Жыл бұрын
Is there a specific name for the green red and black wire that connects the two? Bought some off Facebook and that wire is missing 😅
@secretvanityx5690 Жыл бұрын
As well as the resistor
@Vtec4LIFE00 Жыл бұрын
@@secretvanityx5690did you find any I just need the long green and red wires
@steezymoses3 жыл бұрын
I have these exact same tail lights installed on my 2011 Lancer GTS & every time I turn my lights on the tail lights flicker & don’t turn on properly. Also they stay on a little after the car has been turned off for about 2-3 mins. Is this normal? Also, wanted to know if I can order that evo rear bumper you have on the white Lancer & ship it to California. Nice Lancers btw!
@sboys3 жыл бұрын
We’ve never had those issues, you might want to contact the company, and the bumper I don’t believe you can I think they just ship in Canada. And thank you!
@florenceguiao26793 жыл бұрын
I'm experiencing the same issue, have you resolved this?
@steezymoses3 жыл бұрын
@@florenceguiao2679 nope! Still have the same issue sadly
@florenceguiao26793 жыл бұрын
@@steezymoses do they still work properly?
@chrisretro69523 жыл бұрын
Did you go with custom exhaust to fit for the bumper?
@baconfootlettuce89233 жыл бұрын
Sick tail lights! Been binge watching your vids and wanted to know where you got your side plate holder and plate covers?
@sboys3 жыл бұрын
Thank you for the support! And the side plate holder we got from Mitsubishi and the plate covers Canadian tire
@ryansabrinadefreitas79223 жыл бұрын
where did you order it from?
@sboys3 жыл бұрын
Vland website
@VLANDSHOP2 жыл бұрын
🔥🔥🔥
@KarimAlaarab3 жыл бұрын
Sheeeeesh
@Anvimx2 жыл бұрын
Thanks bro!!
@shadox4b3 жыл бұрын
Thank you so much your video was so helpful
@hadog8453 жыл бұрын
where can i get those stickers? the one fron your door
@sboys3 жыл бұрын
Wish
@hadog8453 жыл бұрын
@@sboys what is the name?
@sboys3 жыл бұрын
💰 Look what I found on Wish! I'm giving you CA$7 off your first purchase with code: hhkhvpq dl.wish.com/BYT9e
@ethankozak64223 жыл бұрын
What is the exhaust setup on Josh’s lancer?
@sboys3 жыл бұрын
Same one as the grey one
@jvnni_83 жыл бұрын
Any links to the side license plate ?
@sboys3 жыл бұрын
Mitsubishi dealer
@jvnni_83 жыл бұрын
How much?
@daltoncampbell7223 жыл бұрын
Just purchased from the website linked, it’s legit and safe right? PayPal said i just payed 700$ to just a bunch of Chinese letters. So I’m just wondering if you had the same situation.
@sboys3 жыл бұрын
Yes mine had that to , it is safe
@daltoncampbell7223 жыл бұрын
@@sboys sweet, turns out the items I ordered are out of stock and now I have to switch the housing. But they haven’t responded to emails, which seems to be the only way of contacting. It’s been a day or so, but still you’d think they would have decent customer support. Any problem like this with you?
@sboys3 жыл бұрын
We had the same thing, we email them to and tried to change it but they didn’t get back to us . But they said to me that it was out of stock then about 2 weeks later they came ... the way I found they answered was I texted them instead of email and they got back to me but for the out of stock it’s only about 2 weeks wait at least it was for us man
@chuckjones72182 жыл бұрын
Got these, returned them. The tolerances are pretty awful. I can slide coins through the gaps be ause the fit is so poor. BUT your video helped me get them wired and unwired with no problem. Thanks homie.