Installing YITAMOTOR 6 Inch Aluminum Running Boards on 2008-2018 Silverado/Sierra 1500/2500/3500

In this video we install YITAMOTOR 6 Inch OEM Style Aluminum Running Boards on a 2008 Chevrolet Silverado. Love these running boards!
If you want to purchase these, get 10% off until 10/7/2020. Link below!
Even though the product title is 08-18, the instructions do show it fits 2019 models crew cab as well.
Discounted Link:
www.amazon.com/gp/mpc/A2KL0BL...
Product Details:
www.amazon.com/dp/B07W4B7XDH?...
**Social Media:
Instagram: / bmpowered19
Twitter: @b_powered
TikTok: @bmpowered
Facebook: @bmpowered19
**Email: [e-mail]
--AFFILIATED LINKS/ADVERTISING NOTICE--
All links are Affiliated where possible.
When you click on links to various merchants posted here
and make a purchase, this can result in us earning a commission.
Affiliate programs and affiliations include but are not limited to: Banggood.
⚠ Disclaimer (Remember, we are idiots, not professionals)Here at B.M. Powered, we are doing our best to prepare the content of our website and our KZbin channel. While we make every attempt to ensure that the information contained on our website or KZbin channel has been obtained from reliable source. B.M. Powered is not responsible for any errors or omissions for the results obtained from the use of this information. All information on our KZbin channel is provided " As-Is ". B.M. Powered cannot guarantee the completeness, accuracy, timeliness, or of the results obtained from the use of this information, and without warranty of any kind, express, or implied, including but not limited to warranties of performance, merchantability or fitness for a particular purpose. In addition, to the extent permitted by the law, B.M. Powered shall not be responsible for any losses and/or damages due to the usage of the information on our KZbin content. The members of B.M. Powered are providing this content on their website and KZbin, strictly for fun, hobby and entertainment purposes only. Any reliance you place on such material is therefore strictly at your own risk.
#Yitamotor #Runningboards #Chevy #GMC #Chevrolet

[@IAnonymous3]

Can confirm these are great. I installed mine the other day. Extremely easy install……. (14 Silverado crew cab).

[@krittle222]

Fantastic video! Thank you so much! very instructional, great visuals.

[@alonsoamezcua2386]

Great video with in the first 2 minutes after checking out and comparing i knew what to do

[@BMPowered]

Thank you! So far so good. I love the look and they work great!

[@alonsoamezcua2386]

@@BMPowered so far very pleased not having to jump in

[@BMPowered]

@@alonsoamezcua2386 Haha, for sure!

[@alonsoamezcua2386]

@@BMPowered lol, i got a 2011 4x4 stock i need it

[@j.m.8185]

Great video. Those boards make your big beast look so much better. If I had a truck, I'd definitely look into getting those.

[@BMPowered]

Yes! They look way better than the previous.

[@joshuaverdin2160]

Does it matter what side A and B go on the truck ?

[@thejewelsofchicago]

Thanks!

[@huecxiong]

How did you anchor the passenger front two bracket bolt on the top? My 2500HD didn’t have any holes on the top for the front two bracket, just the holes on the bottom of the rocker panel.

[@BMPowered]

Hmmm, really? Mine had factory bolt holes on the front two holes.

[@BMPowered]

You could take a large drill bit and make your own anchor points. Not ideal, but would work.

[@huecxiong]

@@BMPowered yeah, I thought it was the strangest thing. The driver side had holes, but the passenger side didn’t for the front two brackets on the top. I looked at the instructions, but the illustrations wasn’t clear on how to passenger side front two bracket top bolt were to be mounted. I might have to get a bigger drill bit and do just that, & use the supplied u-clips. Thanks for getting back to me and confirming yours has it. Maybe those holes only exist on the 1500s?

[@Numminz]

How are they in the rain / snow? Do they get slick?

[@BMPowered]

Actually not bad. We did just have an ice storm and yes, very slick with ice, but would be the same with any. I really like them.

[@roho4078]

Just ordered me a set for my truck.

[@BMPowered]

Awesome!

[@normangettys76]

What is the distance from the running board to the bottom. of the cab?

[@BMPowered]

I honestly don't remember. Looks like around 3 inches. Sadly, I no longer have the truck.

[@ogbose49]

My driver side is closer to the front an my passenger side is closer to the back. Not sure why an you can really slide adjust because you're just turning the bracket an then its not flush.

[@BMPowered]

That's odd. Now, you can loosen the bolts underneath and slide the actual step forward or back and towards or away from the truck. I had to adjust mine.

[@ogbose49]

@@BMPowered thanks, I did slide the outwards on both sides but just weird that they are closer in opposite directions. I think maybe if I turned one around but then it wouldn't look right with the pattern on top but oh well. The metal edges were sharp though, cut my thump open twice so gloves is a good idea. Thanks for the help.

[@BMPowered]

@@ogbose49 Anytime. Hope you get it worked out.

[@abeGT500]

How have they held up?

[@BMPowered]

Avsolutely great!

[@DavidMartinez-jo6hr]

What size lift do you have?

[@BMPowered]

I have a 6 in BDS lift kit.

[@DavidMartinez-jo6hr]

@@BMPowered sweet just trying to see how they would compare to my truck I have a 6” zone lift

[@BMPowered]

@@DavidMartinez-jo6hr Awesome! Love the lift so far!

[@robinwahlenmaier726]

My holes on the rockers aren’t very good due to rust. Do you have to use those holes or will the fram just be okay?

[@BMPowered]

If you can find or make holes in the frame for all the mount points, then yes. If not, I doubt it will be sturdy enough.

[@tyg5265]

I'm curious if you figured out a fix for this? I'm running into the same problem. Of the bolts on the front driver and passenger I can only get one to thread and it's super tight. I wondered for a minute if the hardware was too big. But now I'm thinking it's the rust.

[@jimwashington860]

Whats your wheel and tire setup?

[@BMPowered]

I have the FUL-D53820009845 - Fuel Matte Black Maverick Wheels and General Tire Grabber 35x12.5x20.

[@jimwashington860]

@@BMPowered 20x10?

[@BMPowered]

Tires are 20 x 12.5

[@jimwashington860]

@@BMPowered wheels 20x10 or 20x12?

[@joshsvoboda6787]

Do you still like these running boards? Do they hold up?

[@BMPowered]

So far so good! I really like them.

[@joshsvoboda6787]

Did the paint fade or color fade over time and weather? Another KZbin said his faded in color.....not as black as once was.

[@BMPowered]

@@joshsvoboda6787 Yes, it did fade a little. Nothing a bit of cover all can't restore.

[@joshsvoboda6787]

What can you use to restore....I there a product you recommend? Thanks. That's all the questions I have...lol. Am getting ready to install on my chevy.

[@BMPowered]

@@joshsvoboda6787 Try a product called Cover All. I put it on my old faded air box and it looks amazing!