Top 5 Easiest Mods For Your 2014-2018 Chevy Silverado - The Haul

[@tellis1020]

Wheels and tires have got to be the number 1 mod on my list. It makes any truck look so much better

[@thesmfb8723]

I agree.... speaking of, what wheels and tires are on this truck?

[@alexanderbanteev5960]

I just bought an old Chevrolet Avalanche 2004. And I have a lot to do! I hope that Silverado 2014 will be my next! Good luck with everything! Greetings from Russia!

[@nestorlopez5056]

I have a 2015 Silverado with 82k miles for sale 30k

[@ianmichael6013]

What lift kit is on this truck? Specs on wheels and tires as well?! It’s perfect.

[@BIGJBIGEBIGC]

One of the best videos you all have done for the GM trucks, keep it up!

[@AmericanTrucksChevyGMC]

Thanks for watching! -Zach

[@bamaz7140]

Keep these videos on the 14+ Silverado’s coming!

[@AmericanTrucksChevyGMC]

We absolutely will! Thanks for watching! -Zach

[@jamesyork6023]

Agreed! Your product reviews are really helpful, they’ve helped me out a ton already. Already ordered some stuff for my 2015 I’ve only had 5 days

[@superdave579]

@@AmericanTrucksChevyGMC what size/brand lift and what size/brand of wheels does that truck have?

[@thefloridanative]

@@AmericanTrucksChevyGMC what are some upgrades for a 2018 4.3 V6 Silverado?

[@waynecaviston4116]

Those tail lights look sharp. I just got a ‘16 Silverado last year and I’m loving it. The first couple of things I did was under seat storage rain guards on the windows and a bed cover. Next I’m looking into tinting the windows and the cold air intake.

[@Mariorrrr]

How’s it going so far?

[@Haydeewaydee]

How it goin m8

[@waynecaviston4116]

Life got in the way so haven’t done the tint or cold air intake yet but just got a new job that pays more so hopefully soon on both

[@yaballa85]

Well hows the job going man 🎉

[@charliepoland6952]

What I’m going to do to mine is a husky floor mats,a bed cover,led head lights,blacked out led tail lights,bullet antenna,trailer hitch,bull bar,and black rims with wheels I’m going for a full black out

[@urarctos]

Hell yeah brother!

[@rayman8991]

The truck in this video is clean and not over the top. Very clean appearance, blinds in with the truck, and it’s simple.

[@AmericanTrucksChevyGMC]

Thanks for the kind words, Bobby! We appreciate it! -Zach

[@craiggagnon8407]

@@AmericanTrucksChevyGMC I literally want to send you mine and have you make it identical hahaha

[@brianmoretti6480]

Where do you buy the oil separator? And do you have an install video

[@baghdadwarrior039]

That what Id love to have

[@IAnonymous3]

Grille… I went with Headlights tail lights 3rd brake LED bolts into grille inserts n inserts 2 train horns 200psi compressor 5 gallon air tank 3” leveling kit Cam,intake, side exit exhaust Tinted windows Running boards Full kicker stereo amp subs 7 gallon water tank w/hose A-pillar LED rigid spotlights LED pods lights into bumper (grinder) Tow mirror install (had to swap door harnesses for 14 LT model) RDJ tailgate panel-

[@RecklessTJ]

Really need an install video for those running boards.

[@_loois]

Lol

[@guysteel]

Why?

[@ericanthony9058]

I bought a set of those led tail lights. I live in the Salt belt after 1 year, and 1 winter season tail lights failed due to the salt sorting out the resistors that are installed in a bad location on the tail lights them self. So redesign is a must, or a company needs to make an item that will close the gap behind the taillights.

[@dan69cam]

I noticed that last night on my 2018 when I had a taillight out, nice big holes back there for the rear tires to throw everything at the back of the lights.

[@briangallegos6720]

I just got 2018 LT 5.3 does anyone know what kind of cold air intake would be best ? Or would it best to leave it stock since that’s what’s it’s designed for ?

[@Nick-sx6jm]

Its best to leave it stock unless you have money burning a hole in your pocket. Most factory intakes now are "cold air intakes" and any claims you see from aftermarket ones are including a edu tune as well to get whatever they claim. Spending over 1k for an aftermarket one and a tune to make like 15 hp is not worth it.

[@TheHallway7]

With the air box why would I need a K& N cold air filter upgrade? Please educate me. Thanks.

[@tristanwwsd]

Nobody needs one. It's just a shiny object.

[@anthonyalba1238]

I just bought a 2017 with the 5.3 and I want to turn off the cylinder deactivation.

[@ajbrown5819]

I've got a 17 Silverado 1500 lt. I also had the windows tinted, front floor mat, inchannel window vents, hood visor, new exhaust system, and a magnuson supercharger. Oh and my Winston brush gaurd. I might have to do a video of it.

[@Arbor_Solutions]

Yes

[@jasonjackson329]

What about jump seat to console swap. I want to put a console in my 2013 2500HD but I want the newer style ones like 2014/2015 etc. vs the 2013 console. Is this possible?

[@stoker261]

i would love some advice on new tires and rims for my 2015 silver.

[@salexander3605]

I just went from stock size to a 20” wheel on my ‘14. Got my wheels on custom offsets website

[@rociozarate3156]

I like the lights.

[@zacheiriksson]

Should be mentioned the catch can should be checked much more often If in sub zero temps

[@brandonle7977]

Can anyone recommend a lift that requires no permanent modification to a truck like no cutting or trimming of frame or anything and what’s the highest I could go if I went the route of no cutting? For a gmc 1500 2018 rwd

[@jesusruiz3723]

Don’t lift it if it’s 2WD SORRY NOT. SORRY

[@motopro80]

Depends on what kind terrain you plan on truck on. If it’s a street only truck you could get maybe 4-6 in if the kit doesn’t cause you to move the drive shaft angle. If it’s desert style I would go with dirt king UCA and king shocks or fox 2.5 . Which will give you a 3 in Lift but more travel and a better ride. And you could add a 3-4 spindle with the uca arms the list goes only depends and what you’re willing to spend

[@is951s6]

Go with a leveling kit it's a cheaper start

[@AmericanTrucksChevyGMC]

Generally speaking, you can find good lift kits up to about 3.5-4" that won't require cutting/permanent mods to the truck. When you start seeing kits that include differential drop brackets, crossmember, and relocation brackets of other kinds, then you'll start grinding and cutting components. Rough Country, ReadyLift and other have really nice lift kits that don't require cutting things up! 2WD truck are a little tricky, definitely less to choose from in the aftermarket, but generally you can find some good kits! Hope this helps. - Adam

[@tylerbranch2918]

@@jesusruiz3723 Dumbest comment ever. Congrats. Of course you can lift a 2WD truck.

[@frenchfrysz6695]

im glad a got a 2018 Z71 with the color-matched front/rear. Chrome is not this trucks friend lmao. Also, I feel that a CAI is not going to do a thing over stock (besides noise) without a tune.

[@AStanton1966]

I put the JLT catch can on my 2017 Silverado LTZ 5.3. I was amazed at the oil/residue it catches. I can't believe that these direct injection engines are dumping that garbage back into the motor.

[@lolsk9136]

I’ve had the same reaction on any vehicle I put a catch can on lol, makes me wanna get a rebuild

[@AStanton1966]

@@lolsk9136 Direct injection and turbos are for the birds. Bring back the Vortec.

[@AmericanTrucksChevyGMC]

It's why I always say its an "all pros, no cons" kind of mod. It's easy, and it works. -Adam

[@bradyanderson6840]

You guys gotta do an AFM delete. It's the active fuel management system cutting your truck down to 4 cylinders. What they don't tell you is that while the AFM is active it is still vacuuming in the 4 dead cylinders and pulling oil and burning it. This contributes to the oil usage on your truck and frankly I didn't see any changes in milage. If anything it got better! Highly recommend 👌 A hell of a lot smoother to drive too

[@AStanton1966]

@@bradyanderson6840 If you have a 6-speed, you can set the gear to 5 in the manual mode and it won't go into 4 cylinders. I also bought the Range Tech and that works for about $200.

[@lmontes09]

Hey there thanks for these upgrade tips. I have a 2017 GMC Sierra SLT too, but I find the stock backup lights are too dim to see anything when I back up in the dark. I have a long driveway that is hard to navigate at night, so I need brighter lights to avoid hitting anything. Do you have any suggestions on what kind of upgrade lights? I've tried brighter LEDs but still not great. I'm certain GM doesn't hold a monopoly on this problem because I have a Toyota with the same problem. Thanks in advance.

[@stevecieply9630]

new sub have a 2017 lt 5.3 lookinf for led taillights and blacked out headlight cover and fog cover

[@anthonybyus417]

Is this a leveling kit? Or a lift? And what size is this? This is a perfect height..?

[@samsoren5033]

ever find out?

[@bobb4987]

Buyer Beware! I bought a pair of mirrors from American Trucks for my F150. After just a couple of months they no longer locked in place and I had to constantly open my window and push them back into place. Very dangerous. American Trucks said that they only have a 30-day warranty. When I expressed my displeasure, they offered me a $27 credit. Wow. I had spent over $1400 there this year. I told them to keep their $27.

[@reedbradford5125]

In the future, you should check out boost auto parts. I've had their tow mirrors for over a year now and they have held up great. I've put them through it, off roading, going the speed limit ;) and through multiple car washes where the machine has banged them up or bent them backwards. They've never went out of place. Some mild shaking from what i heard if you're going over 100 mph, but I'd definitely recommend checking those out.

[@Realitycheckm8]

I second this. I've had the Boost tow mirrors for four years. I added every option except the electric motors & second mirror heater. No issues.

[@bradleybrowning9612]

The taillights are fine unless you have stock led like I did on my 2017 and I have still yet to find a aftermarket set that will work

[@AlejandroCarrera-ku6ke]

Where can I get new seats for all the truck 2014 Silverado , also , can I upgrade the whole front for a newer one

[@IGORLAZARR]

Will those axial smoked tail lights fight on a 2014 GMC Sierra 1500?

[@Thedudeisblue9725]

Have the k&n intake on my 16. Yes it sounds cool, but i drive 50 miles each way to work and im cleaning it monthly sometimes... Disable the afm... Catch can cant hurt, no experience personally but i installled one Dont wait until 0% on the dash oil light. Surefire way to have lifter failure, the afm ones are temperamental,need clean oil Trans tuning is garbage, too aggressive, i have to run my v6 wwith a heavy foot so it wont go down the road at 1150 rpms. Really tho. It wants to be that low from 15 to 45mph. Damn i need a lift...same as mine but im on the base 17s

[@prymetime28]

What size lift and tires are on this truck

[@AimingWanderously]

I hear so much back & forth about cold air intakes not being necessary, not being worth it, etc etc, woudl love to see some tests showing it's truly a step up. And woudl it matter on 6cyl 4.3 or 8cyl or, both?

[@kylebradley7751]

Modern vehicles come from the factory with “cold air intakes”. Companies that claim a hp increase after installing their intake are tuning the ecu to get said increase in hp. Doesn’t make sense for the average consumer to spend close to $1000 for 10 hp

[@AimingWanderously]

@@kylebradley7751 HP, no, but what about gas mileage?

[@andrewcox7179]

@Aiming Wanderously I have a silverado a will not be putting a Cai. I had one on my tundra abs it made zero difference. It sounded cool and maybe increased throttle response but nothing other than that. Just my opinion

[@justice2.0]

Is this truck tungsten metallic? Looks really good

[@TheSpecialist54]

I bought a 2018 silverado 1500 ext. cab LT about 3-4 months ago, I have the same color its called "Havana Brown" its sharp.

[@zackk695]

One mod this truck needs is to either lower the front end a little or raise the back end. The back should be higher or level with the front to give it a cool look. This one had a front end that’s to high

[@zoobrizz]

Nope. Just right

[@RandomIzSikk]

First thing I usually do is remove the running boards..

[@chutman100]

HAHAHA me too! Good call. I would only keep if the truck is too lifted.

[@letsgoBrandon4200]

I have a question I have a 2015 Silverado 1500 lifted and I do not see a splash shield for the engine underneath it everything is exposed once you lifted the truck did you use an aftermarket Splash Shields?

[@letsgoBrandon4200]

@E. Tamplin It's the Z71 4wd it has a 6" fabtech lift I figured it would have came with the plates but there is nothing everything is exposed

[@letsgoBrandon4200]

@@grayghostJSM I bought it used I'm sure whoever had it before lost the splash Shields or whatever it's even missing the upper radiator Cover I'm trying to find a replacement for the bottom splash Shields It seems like the 2015 don't have much

[@miguelclaire5196]

What’s the lift height on that truck ? Super clean

[@AmericanTrucksChevyGMC]

6" of lift on our 2016 Chevy! -Zach

[@googlesucks4836]

Nice video and sweet truck. Is that lifted or leveled? Wondering about tire and tire package also. Sizes?

[@Futurebeefcake]

Can we get a lot more 07-13 content

[@robindabank4089]

No buy a new truck

[@dmac2899]

@@robindabank4089 some people don’t want to spend the extra money. Don’t be a jerk

[@Mikey-wf9py]

I want to take off my tow mirrors they came from it dealership factory with them I want to put on regular ones is it plug and play

[@joshuashultis6589]

Running boards just get in the way

[@anthonybyus417]

What size lift is this? Or is this a leveling kit?

[@AmericanTrucksChevyGMC]

6 inch lift! -Zach

[@maicon_13]

@@AmericanTrucksChevyGMCtire size?

[@albertomadrigal2799]

Where did you get the canister at for the oil

[@DennisTheMenace5150]

Cool video

[@AmericanTrucksChevyGMC]

Thanks a lot for watching! -Zach

[@MrEFilms1]

Nice! Thanks man. What about fender flares?

[@marcaliventialiventi765]

Gotta be careful with flares, truck has to be clean dry and dirt free. One mistake and fenders will rust

[@beneastman2900]

Will the oil separator and the intake make me throw a code? 2018 Sierra 5.3

[@AmericanTrucksChevyGMC]

Nope! It won't make your truck throw any engine codes! -Zach

[@alexlawson7322]

i think toolboxes are pretty easy to install and should be equivalent to the tonneau cover

[@bretmenoche1891]

As far as I’ve seen they don’t make the oil separator for the 4.3L model Silverado.

[@armonhall3848]

I just bought a 2017 chevrolet silverado ltz 2lz midnight edition and I put it on the freeway I pushed it to the limit and it top out at 99 mph have you done any videos on that and how to get more from my silverado thanks in advance

[@brandonu7806]

Possibly has a governor installed to limit max MPH, you should be able to get over 110 easily with the 5.3l

[@patrickacevedo]

Sorry reading old comments but that’s 100% governor…Silverado could probably do 120 without it

[@myoverlandingjourney]

What size lift/wheel&tire combo does this truck have?

[@AmericanTrucksChevyGMC]

6" of lift and 33" tires! Check out the full build at the following link! -Zach kzbin.info/www/bejne/jXW2gIiCar6Fq7c

[@bernardolope8741]

What kind of lift kit does the truck have!!!

[@isliooo]

What tires and rims you have on??

[@kurmit0076]

How many inches is that lift kit I want my truck like that

[@JoseDovalina]

What Wheels and tires are on this

[@613hickmafia]

What’s that colour on the truck

[@ONI_MoversLLC]

What lift and stance would you suggest for someone who wants to raise it a little higher but also still be able to tow and haul?

[@kadenmunson5345]

3 inch level

[@a.l6922]

Question could you easily swap a 4.3 for a 5.3? Is there a difference on transmission

[@Shredforlife123]

Just sell your 4.3 and buy a 5.3

[@guysteel]

Easily? Just the fact that you're asking that question on KZbin- the answer would be no.

[@MeliorIlle]

How often do you empty the catch can? Every oil change?

[@AmericanTrucksChevyGMC]

I'd start by checking every 2,000-3,000 miles until you get a good idea of how much oil it catches! Every engine is going to be a little different. -Zach

[@MeliorIlle]

@@AmericanTrucksChevyGMC And this is a mod to get only if your engine leaks oil?

[@donjuan5726]

Do y’all think the oil catch is actually affective? Jw if it’s worth getting.

[@tonysilveira30]

How many inch lift was on this truck

[@chap23305]

Why is Adam slowly morphing into Fuller from Custom Offsets

[@AmericanTrucksChevyGMC]

I don't really understand, but I'm just gonna keep doing my thang. Thanks for watching though! - Adam

[@munchiefish239]

I would say emblems and tow mirrors are a good edition

[@Mr.Beastforpresident]

Ain’t not a damn thing cold about that intake buddy at-all 😂

[@austinmackinnon7620]

Most ppl I know seem to wanna take off the running boards

[@martinpafumi3945]

What lift and wheel and tire size did you go with on this truck? I like the stance

[@AmericanTrucksChevyGMC]

6" lift and 33" tires! Check out the full build at the following link! -Zach kzbin.info/www/bejne/jXW2gIiCar6Fq7c

[@dlawsonlawson1582]

How will it tow? I want to do this to my Silverado but want to pull a camper

[@dillonmelin7564]

@@dlawsonlawson1582 add helper air bags

[@josesandoval7263]

No flowmasters ???

[@DanielPerez-cv1bs]

What year is that truck? She’s a beauti

[@AmericanTrucksChevyGMC]

2016! -Zach

[@celiactrunc]

what tires and rims are these please ?

[@AmericanTrucksChevyGMC]

Check out the following links! -Zach Raceline Shift Black Machined w/ Dark Tint 6-Lug - amtrucks.at/2GYGrH9 Mickey Thompson Baja ATZ P3 Tire - 285/55R20 - amtrucks.at/2RBzuzV

[@is951s6]

2014 bolt ons and tuner videos plz 🤤

[@adansanchez3630]

What size of lift does that truck has. ???

[@AmericanTrucksChevyGMC]

6 inch lift! -Zach

[@Mufasa2206]

Do performance mods

[@jamesbowman6260]

Ecm Stabili trac no cooler and transmission spent

[@genepikejr.8093]

What size lift kit and tires are on this truck?

[@AmericanTrucksChevyGMC]

6" Fabtech Lift and 33" tires! Check out the following link to watch the full build on this Chevy! -Zach kzbin.info/www/bejne/jXW2gIiCar6Fq7c

[@Tacuache602]

What lift you guys have on the silverado

[@AmericanTrucksChevyGMC]

See the following link! -Zach www.americantrucks.com/chv-fabtech-6in-gen2-basic-lift-shocks-1417.html

[@anotherdayinthedirt7548]

What lift is this truck on I absolutely love it

[@AmericanTrucksChevyGMC]

Fabtech 6" Gen 2 Lift! Check out the following link for more information on it! -Zach www.americantrucks.com/chv-fabtech-6in-gen2-basic-lift-shocks-1417.html

[@88Heckenlively]

Tonneau covers aren't practical. Get a bed cap/shell - you'll love it

[@lj180817]

Can this fit the z71?

[@oscarherrera7618]

starting to learn more but what year is this Silverado?

[@AmericanTrucksChevyGMC]

Our gray Silverado is a 2016! -Zach

[@jarviz2.0]

What year is the Silverado in the video?

[@AmericanTrucksChevyGMC]

2016! -Zach

[@jponyboyace]

Gator covers...try them...5minutes installed!!

[@Itowle9]

Why not the 3rd brake light 😅

[@joshreece6676]

What’s that lift on that truck???

[@AmericanTrucksChevyGMC]

6" lift from Superlift, I believe! -Zach

[@eeryhickory]

What’s the lift and tire size?

[@AmericanTrucksChevyGMC]

6" lift and 33" tires! -Zach

[@RobJob110]

Thanks for the great vid. Can we get info on the featured truck? Specifically, details of the lift kit, and the wheel/tire combo including offset etc...

[@AmericanTrucksChevyGMC]

You can see the full build at the following link! -Zach kzbin.info/www/bejne/jXW2gIiCar6Fq7c

[@deezee147]

What size life is this? 🤔

[@larrymaples4880]

500 for taillights ? Ha not a chance in hell I’d give that much for taillights .

[@GregK9]

He said easy mods not cheap....

[@ryanfera138]

i have a 2015 silverado, but it’s a v6, do you recommend lifting it?

[@nathangoddard8115]

I am also curious about this. I have heard that life kits can place undo stress on components because the angles are steeper.

[@dannyhernandez3969]

i say do what u want.

[@2009rummell]

@@nathangoddard8115 I drove a 98 with a v6 with 3 inch lift in the back and 3 inch torsion bar keys up front and never had any issues

[@mikeporter76470]

You probably have the answer by now, but I also have the 6 cylinder in my 2017. I put a 2.5 lift on front and a 2 inch lift on back. It will stress your front axles so you do have to install a front diff relocation block as well. But it is super easy to do. Also installed lt275/65r20 Nitto G2. No noticeable ride disturbance.

[@Flexsuz]

What wheels/wheel covers are those?

[@thunderbolt5354]

They aint wheel cover Fool they are tires and rims Not Wheel Covers ! Durrr !

[@Rpjr650]

Hate that the market for 14-15 Silverado is slept on, I’m trying to find a nice cowl hood for my 15 but they’re pretty shitty, 16+ models and 13- models have nice options

[@hecs8850]

How many inches on the silverado?

[@AmericanTrucksChevyGMC]

6" lift with 33" tires! -Zach

[@p.tookover632]

What year is this truck

[@AmericanTrucksChevyGMC]

A 2016! -Zach

[@AdamSmith-gs2dv]

Mod number one should be disabling the motor destroying tech called cylinder deactivation. Its been what 15 years since this garbage was introduced manufacturers STILL can't make a system that doesn't end up blowing up the motor. It doesn't matter if it's GM, FCA, or Honda they all fail eventually and either require a new head or a completely new engine

[@mikeporter76470]

Shhhh..... I make a lot of money off of fixing these issues.

[@bigmofooutdoors4301]

What year is that truck?

[@AmericanTrucksChevyGMC]

2016! -Zach

[@t-bonesdirtydeedsllc8108]

Why does the front of the truck sit higher than the rear? Look bad.

[@AlmightyKnights18]

Add price

[@mrsully21]

Third break light.....

[@beans6989]

45 mins to install taillights?

[@bozak2320]

I think they forgot mention that's after drinking a 2-4.

[@lilcs3011]

The intake is a waste of money they already come with a factory intake that pulls air from the fender.

[@danbooher5843]

Side steps, lower ground clearance, they suck.

[@AmericanTrucksChevyGMC]

Or - they can be really helpful for people getting in their truck who don't care about ground clearance. 😎 -Zach

[@SubToRandomVideos101]

@@AmericanTrucksChevyGMCthen dont jack the truck and put big tires on it smfh