Intake Build For Mikuni 22mm Carb For Any Small Engine

[@GoKartsorGoneFishin]

If you do leave a dislike I dont mind but plz tell me why..I work hard on these videos and nobody ever says anything negative..any feed back is much appreciated!

[@AntonioClaudioMichael]

I work hard on mine as well bro and every video I have has 1 or more dislikes and nothing is ever said i don't sweat it and just look at it as I got another view

[@seedlessgrapes2605]

I just saw your other video where you mentioned you got a lot just like on this video so I checked it out and I gave you a like number 61

[@michaelthomas4182]

Can you make me a intake ?

[@jaquestodd4910]

can u make me this

[@GoKartsorGoneFishin]

@Jaques Todd send me 50 bucks and sure..

[@patrickhatrick6215]

Nice work brother! So cool of you to do that for Saul. Hope your kindness comes back to you 10 fold bro! PEACE!!!!!

[@BSSMALLENGINES]

Good idea using the washers. I keep plate steel around just for making manifold but not everyone has plasma cutters and stuff like that so the washer trick is a great idea.

[@augielimon7029]

Great job. Love your videos. Helpful tips... clean your washers with muriatic acid it's cheap at any hardware store. Prep your pipe with it to. Your welds won't be UGLY and less clean up after. The galvanized coating contaminates the weld big time.

[@GoKartsorGoneFishin]

That is smart man..I'm new to welding and I dont have a ton of money..every little tip like this helps..thx for watching brother!

[@JamesSmith-st9nw]

You may think this is nutz but it works and a lot less fumes. Toilet bowl cleaner lol, I have been welding for 28 yrs Motorsports stuff, I swear it works great !

[@srcobra50]

Nice power slide on the intro. Can’t thank you enough brother big thanks to Johnny too with those finishing touches. Great video, gona help a lot of people out there wanting to build a custom intake. Gona be a big help when I attempt it myself in the future also. Badass job man.

[@GoKartsorGoneFishin]

Anytime brother..I pride myself in being a man of my word..if I say I'm gunna do it ..I do it..thx for all your support!

[@richardkautz2947]

When you can't even afford to buy cheap Chinese junk, you have to make it yourself. I was fortunate enough to get an old quad with a similar size engine and the carburetor (if it's still any good) is the same size as what you buy from the Internet. Love videos like this ! 👍🏻

[@GoKartsorGoneFishin]

Sweet thx friend!

[@eastcoastuk9705]

Great how to Nate & top guy for sorting Saul out 👍. You need a nice sponsor now to send you a Lincoln set up 😉

[@PullerbearEd]

Those are wicked intakes..you do great work.

[@cannonballrepair7940]

Very nice! Well done Nate!

[@CainSample]

Saul is gonna be rippin soon💪 you rock nate

[@srcobra50]

Yes sir. 5hp briggs on a motovox is my plan for now

[@DragoWerx]

Nice! We have a 3 horse B&S with no carb...and a Kehin carb. Haven't been able to find an intake to put the two together, will definitely be doing this!

[@GoKartsorGoneFishin]

Sweet!

[@AntonioClaudioMichael]

Very impressive work on the washer looking like a exhaust gasket shape now

[@LNRRidez]

Looks good brother, I'm sure he will enjoy it!

[@Mudmowerdiesel]

Awesome channel thank you friend

[@christianenglish9433]

Thanks for saving me money I’m truly glad you posted this video

[@GoKartsorGoneFishin]

Swwet..thx man..glad it helped!

[@Tampaboys]

Heck ya buddy that’s awesome work I need to make me a couple of those thanks for this awesome video brother

[@thisguysgarage]

this could come in handy for my boys jr dragster when ever we get back to normal. ty buddy

[@PaulieDetmurds]

That is brilliant! I really mean it,..very great innovative thinking! An exhaust could be made the same way!

[@mmf2988]

awesome buddy! also awesome work!!

[@JVScustoms]

Good stuff man!!! I just started making my intake yesterday for a Briggs I just picked up from my dads place. He passed away and while I was at his house going thru some stuff I found a Briggs flathead 5hp industrial sitting outside. I took it home and plan on building it up and throwing it on a old school mini bike I have, I think he’d like that. Anyways the factory carb is trash so I’m making a intake for a mikuni 22mm and then fabing a header for it. Thanks man m, love your videos

[@AntonioClaudioMichael]

Nice work with the jb weld and nice trick with the spit on the jb weld

[@motokiller7742]

Heck ya buddy awesome job brother

[@CainSample]

Great job it looks mint👍

[@bstarnes514]

I like it man! Good thinking on the washers! I built mine the most complicated way possible lol.... These washers would have saved me half the battle lol! Good job my brother! 👍

[@GoKartsorGoneFishin]

Thank you friend!

[@BensWorkshop]

Like it Nate, though I would probably start with a different flange material.

[@AntonioClaudioMichael]

Love the color of blue on the first mini bike

[@mkuhlman77]

A multipurpose welder will do you wonders so you could tig weld. The Titanium I think it's a 160 model from harbor frieght is great. Otherwise I like your thinking.

[@GoKartsorGoneFishin]

Man I tell ya..one of these days I will upgrade..so expensive for me anyways..thx for watching friend

[@justindavis2856]

Awesome video!! Ive been trying to bring back an old 3 horsepower Briggs to out on an old mini bike for my daughter. But the carb and fuel tank are pooched. Definitely gonna be following your video to try to make my own. Any suggestions for carb size for a 3 horsepower briggs?

[@GoKartsorGoneFishin]

Not sure if they make anything small than a 22mm makuni..but maybe a carb for a 50cc pit bike would work..get em on amazon for like 20 bucks..I'm actually building an intake for a 390cc honda right now..thx for watching

[@JimmyCandFriends]

Nice work Nate👍✌

[@AntonioClaudioMichael]

Saul is going to love it nate looking sweet broski

[@vf555fotia7]

What size Mikuni carburetor could you put on a three horse flathead braves 22 mm Mikuni seems too big

[@GoKartsorGoneFishin]

I think a 22mm would be too big..I would look for a 50cc carb..I bet it would work great..thx for watching friend

[@loosescrewlab3605]

that's awesome bro!!!! goin to have to invest in some of those washers!!!!! n yep gotta like ole jb weld!! huge thumbs up!!

[@MrEricdgreat]

Great informative video just Incase I need to do this one day . One question how to you size carburetor to engine??? Thank you.

[@GoKartsorGoneFishin]

I just wing it..alot of slide carbs are very adjustable..thx for watching

[@elfredii2348]

I was wondering if it was ok to make a steel intake since i have not tried to weld aluminum. Now i know it is and can continue with my mud mower build . Thanks!

[@AntonioClaudioMichael]

You got a beautiful rain storm going on bro

[@miguellovino7679]

Great video good idea use the washers do you think the same carb will work on the briggs & stratton 2hp

[@GoKartsorGoneFishin]

Might be a bit too big for a 2hp..but I'm sure they make smaller carbs

[@jaybyrd1935]

That is super awesome that you did that for one of your subscribers I have three mini bikes myself if you look in my subscription picture my KZbin subscription picture the left you will see it in the little circle 1969 Doodlebug hot rod little mini bike fast fast fast wheelie bars are not for looks safety feature keeps me from looping! LOL! It's too bad you guys are so far away from where I live cuz I could totally see myself cruising with you guys on your mini bikes and partying later on oh, all right bro skis keep up the good work sincerely your fan jaybird.

[@GoKartsorGoneFishin]

Heck ya man that's a good looking little bike...thx for watching Friend..lots more to come!

[@kartnerds]

Looks good man

[@AntonioClaudioMichael]

Omg that purple box fan is pimp bro

[@twistedvtwingarage7260]

Looking good Nate

[@looneycrow7978]

Interesting.. using outside cutout of washer

[@rmckayne]

Great video! Thanks.

[@GoKartsorGoneFishin]

Glad you liked it!

[@derbydriver1048]

Looks good brother

[@RCNDN]

Great video Nate. I have a technical question.. Once you've taken off the original carb, tank and muff to upgrade to the "mikuni carburetor" . What do you do to take care of the governor? (once the linkages are off). Thanks, your input would be appreciated!

[@GoKartsorGoneFishin]

I just let it flop around...lol..I dont recomend this..lol..sorry so late

[@pumplife8138]

Love it

[@alanrodriguez7525]

I want to this but I’m worried about boring out the center of the washer I don’t have a dremel what do you suggest TIA

[@GoKartsorGoneFishin]

Get a step down or unibit for a drill..kinda expensive but works ...thx for watching..plz hit the like..some trolls disliked the hell out of this video

[@mrmomjoe8019]

keep up the awesome vids bro

[@chrisstrwart6661]

I don't have a welder! Would straight jb weld hold just by itself? I am doing a 5.5 myself and need a manifold

[@GoKartsorGoneFishin]

I don't think it will man...but its worth a try..thx for watching Friend

[@chrisstrwart6661]

Thanks for the instructions. I think I'll save some time and ask a few friends for help.

[@GoKartsorGoneFishin]

@@chrisstrwart6661 I know u could be on a budget but a harbor freight welder is only 120 bucks or so..hope your figure it out

[@chrisstrwart6661]

I'll have to check it out

[@nekotherion7317]

Do you sell these online anywhere? have two briggs engines with updraft carbs, and would like to replace with a mikuni clone dual fuel kit, Only other thing id need to do is use some throttle cable to go from the briggs governor to the mikuni

[@GoKartsorGoneFishin]

No man I sure dont..I have built them for friends in the past but it takes me a long time

[@AntonioClaudioMichael]

Killer video Bro

[@DJswope73]

You mention buying these online. Ive never seen anyone sell them

[@GoKartsorGoneFishin]

Might have to find a fab shop

[@algagliano5567]

Can I buy an intake on line for a3hp Briggs is it the same size as a5hp

[@GoKartsorGoneFishin]

I'm not really sure man..sorry

[@fantro1064]

I got a PZ20 on a 3.5 tecumseh. Idles but dies when I give it gas. Runs a little better with the choke on. Do I need to adjust the pin on the slide needle? Thanks

[@connorssmallengines6663]

Sorry I’m late but anything that runs better needs to be adjusted to be richer. An a screw adjuster richer is out and on on a needle it is lowering the clip

[@fantro1064]

@@connorssmallengines6663 figured it out, about to retire that engine because it has a bad rod knock

[@connorssmallengines6663]

@@fantro1064 ok. Throw away that POS tecumseh and get a Briggs.

[@knightmare302]

Where can I purchase one i need the exact same one for my build!

[@GoKartsorGoneFishin]

I built it..it's custom made

[@knightmare302]

@@GoKartsorGoneFishin i need one didnt know if you sold on ebay

[@GoKartsorGoneFishin]

@@knightmare302 no sir..but I should..your not the first to ask

[@juniorcp84]

What size jet u running?

[@GoKartsorGoneFishin]

I don't remember

[@dabtech7456]

I hear a Lincoln 140 welder.

[@looneycrow7978]

Jb weld cannot handle heat btw... it can only handle 500F

[@GoKartsorGoneFishin]

Still holding to this day..intake doesn't get that hot..thx for watching Friend

[@ronwilliams2081]

can you make one for me???? how much????? i need one, damn mikuni o ring wont work for shit.

[@GoKartsorGoneFishin]

Sorry friend..I'm outta the custom fab work..It would be cheaper to buy a harbor freight welder and do it yourself

[@zakaijohnson9421]

you think u could make me one for a 8hp briggs

[@GoKartsorGoneFishin]

I guess there is a market for these..unfortunately I don't have time my friend

[@samsgarage1716]

I’m always first

[@samsgarage1716]

Great job Nate.Did you just send him a corona manifold with spit on it 😂.the paint covered it up😂.you the man Nate

[@srcobra50]

Sam’s Garage I’m sure the paint took care of it lol iether way I just had to take a test Monday csuse was exposed to someone who may have it....careless cousin of mine

[@samsgarage1716]

Saul Rodriguez I know you will be ok

[@GoKartsorGoneFishin]

@@srcobra50 🤞

[@bossl7fe977]

Hey bro I need an intake for a Briggs 5HP you got me ? I just subscribed 🎉

[@GoKartsorGoneFishin]

Thx for the subscription but I don't build them anymore