Intake manifold gasket replacement | rear main seal | Honda Civic EG

  Рет қаралды 83,888

Refine Movement

Refine Movement

Күн бұрын

Пікірлер: 71
@WideOpenThrottleGarage
@WideOpenThrottleGarage 6 жыл бұрын
Rock on brother! Everything's looking good and thanks for the shout out! And yes intake mani gaskets SUCK!
@RefineMovement
@RefineMovement 6 жыл бұрын
Sure thing Tyler! Thank you as well man, and yeah, the gasket took some time!
@3guysgarage
@3guysgarage 6 жыл бұрын
Loving the progress. Within the next month or so I think we should see this thing running which I am very excited for
@RefineMovement
@RefineMovement 6 жыл бұрын
Thanks a lot Mitch. Yeah, we'll be getting there with it. Hopefully beginning of January it'll be firing up for the first time. I'm real excited for it. Thanks for sticking with me through the process!
@yellowdon_2424
@yellowdon_2424 Жыл бұрын
What's the torque spec on that bracket with the rear main seal
@abrasive59
@abrasive59 2 жыл бұрын
Im doing my auto to manual trans swap right now on my 93 hatch. I had to cut my battery tray out to run the OEM clutch hardline that goes under the battery tray. Yup those 2 bolts were destroyed at the bottom due to my tray not having the plastic acid catch try on top of it.
@alexbowyer3192
@alexbowyer3192 6 жыл бұрын
Coming along nicely Rob. Keep up the good work.
@coldfrontbmf
@coldfrontbmf 6 жыл бұрын
Sweet build man! Ive been watching every episode and comparing to my own build. I'm in the process of installing a D16Y8 and EX S40 transmission in my 92 DX EG hatch. Keep up the great vids and good luck!
@RefineMovement
@RefineMovement 6 жыл бұрын
Oh that rocks dude! Thank you so much for sticking around. So we’re in the same boat then haha, very cool. How is it going for you, with your install? Ex trans is the way to go with the d series too
@coldfrontbmf
@coldfrontbmf 6 жыл бұрын
I got the Z6 harness today out of the junkyard, now all I have to do is find the time off of work to put everything together haha. Also attempting something a bit harder, I'm converting mine to power locks, windows and mirrors.
@RefineMovement
@RefineMovement 6 жыл бұрын
Oh sweet! That's convenient, don't have to run the vtec separate then. But cool man, going full power on the interior. It's funny, you are adding that stuff making it nice, I am stripping everything out, making mine less nice lol. All about what we use the car for though right
@coldfrontbmf
@coldfrontbmf 6 жыл бұрын
I just wanted to attempt something to make mine unique with a few creature comforts. I see it as same passion for cars with slightly different builds haha. Thanks for replying and keep up the great vids! Your vids have helped me with my build.
@tonysepulveda7030
@tonysepulveda7030 6 жыл бұрын
Awesome man. Always a pleasure to watch your videos. Keep up the good work.
@RefineMovement
@RefineMovement 6 жыл бұрын
Thanks a lot! Sure appreciate you sticking around.
@max.racing
@max.racing 3 жыл бұрын
Ive got zhe z6 for my 90 hp d series and install it soon :D Its polished and nice^^
@andrewparker1743
@andrewparker1743 6 жыл бұрын
Thank you. I have found little info on this process. I was expieincing a catch 22 with reguards to dropping the oil pan while my engine is being partialy supported by a jack on the oil pan seeing as the transmission is out.
@MichaelFlare
@MichaelFlare 6 жыл бұрын
I'm confused. Before transferring the manifold, your old motor is not a Z6 but it has a Z6 manifold. Your new motor is a Z6 but doesn't have a Z6 manifold. Why? LOL
@RefineMovement
@RefineMovement 6 жыл бұрын
So let me catch you up. Old motor was a b8/b7 hybrid they pieced together and they used the z6 manifold on it. New motor I just bought (the d16z6) did not come with an intake manifold. So am just re-using the manifold I already have.
@Luddynetwork
@Luddynetwork 5 жыл бұрын
Because racecar.
@pandasgotboost201
@pandasgotboost201 6 жыл бұрын
I stumbled across your channel about 1week ago and decided to subscribe. Im glad i did you got awesome content great videos!
@RefineMovement
@RefineMovement 6 жыл бұрын
Oh sweet! Well I certainly appreciate you hangin' out. Just need to install the clutch/flywheel and get the trans prepped then it's all going back in the car. A few videos ago I cleaned up and painted the engine bay, real happy with that one. But happy to have you on board, thank you! -Robbie
@headshotheroes2618
@headshotheroes2618 3 жыл бұрын
Thanks for this video. Btw when you clean the Manifold with Purple Power and hosing it Down. I know this probably a stupid question, But is that safe to hose it down like that? I have a y8 Mani and I would like to Clean it also like the way you do it.
@viniepooh100
@viniepooh100 6 жыл бұрын
What torque did u use on rear main? Next time u make vids, include that info as it's very important part. Thks
@bombola9299
@bombola9299 4 жыл бұрын
i have a problem on my 1999 honda civic lx it wont start .. i need to clean the water inside the intake manifold to start the car idont no what were is the leak where is the water or the or the oil coming from i need help thanks
@OmarPerez-ln4es
@OmarPerez-ln4es 3 жыл бұрын
Questions my friend is it fine to run a d15b7 manifold on a d16y7 engine??
@LucasEHonda
@LucasEHonda 5 жыл бұрын
Does the Oil Pan have to come off to replace the Rear Main Seal?? Because it looks like you removed the Rear Main Seal without dropping the Oil Pan.
@projectproject.jffjff3806
@projectproject.jffjff3806 3 жыл бұрын
how do you know which side of the gasket should be facing the engine side?
@marksullivan3786
@marksullivan3786 5 жыл бұрын
Any 1 kno were the wires on a d16y7 tht cause them 2 pulsate the electric system at? I know it comes off the altanator.
@josephdavis7717
@josephdavis7717 4 жыл бұрын
Why didn’t you go with a y8 manifold? It’s bigger?
@Mrtrunks
@Mrtrunks 6 жыл бұрын
Looking good man, think it’s time for you guys to build a work bench
@RefineMovement
@RefineMovement 6 жыл бұрын
lol yeah...that would help a bit wouldn't it.
@Mrtrunks
@Mrtrunks 6 жыл бұрын
Refine Movement yea I picked up a cheap foldable table from home depot for lite projects, which is great cause I can store it when not in use. but I need to make a bench as well
@bseries8826
@bseries8826 6 жыл бұрын
Tuning in!
@RefineMovement
@RefineMovement 6 жыл бұрын
Always appreciate it man! Thank you
@richardparent5105
@richardparent5105 6 жыл бұрын
Is there more gaskets then just the ring one for that job?
@blix8787
@blix8787 6 жыл бұрын
Hey just use a smaller socket and hammer it in to remove the battery tray. That's what I did to remove mine.
@RefineMovement
@RefineMovement 6 жыл бұрын
That would be a good idea, thanks man. It seems the rust or whatever it is has build up and made it so it's not even the shape of a bolt head anymore though. its like the Earth is taking the car back lol. But I'll have a look again, thanks
@krazy_lobito4335
@krazy_lobito4335 6 жыл бұрын
Hey on the rear main seals bolts.. you don't torque those bolts down ?? doesn't have a torque specification?
@RefineMovement
@RefineMovement 6 жыл бұрын
It does yeah, they were 10ft lb which is super light. Practically just tighten them down but 10ft lb is it.
@brntoutgarage6164
@brntoutgarage6164 6 жыл бұрын
Refine Movement is your car a 93 or 92? Either way 92 civics all came with vtec prewired.. 93 and up had different harnesses.. I have a 93 hatch myself and just converted from auto nonvtec to manual vtec with a z6..and I wired vtec. Straight to the ecu..
@RefineMovement
@RefineMovement 6 жыл бұрын
I have a 92. Yeah I’ve heard it’s pre wired for vtec, but is that the case on the engine harness as well? I was under the impression that the interior loom going into the bay was pre wired. I was thinking I was going to run the vtec wires straight to the ecu like you did.
@brntoutgarage6164
@brntoutgarage6164 6 жыл бұрын
Refine Movement I have an auto harness I can cutout the harness connectors connecting engine harness to interior harness that way you don't have to run inside.. that way you just wire it into the back of the connectors make it look clean. running them through the firewall was a pain...
@mexicanspidy10
@mexicanspidy10 6 жыл бұрын
Quick question,why is it when I turn my hot ac,it smells like burn oil?
@RefineMovement
@RefineMovement 6 жыл бұрын
Sorry man but I’m not sure what to tell you there. I’ve never experienced that problem myself anyway. If someone sees this comment who knows anything about it, please shed some light for us! Thanks
@andrewnagy600
@andrewnagy600 5 жыл бұрын
Ac Condenser went out
@ModGyver
@ModGyver 6 жыл бұрын
Very cool videos..i own same car..very humbling, SUBSCRIBED
@RefineMovement
@RefineMovement 6 жыл бұрын
Thanks a lot man! Sure appreciate you hangin’ around!
@MumbleVlogs
@MumbleVlogs 6 жыл бұрын
I can’t wait to see this d16z6 run, any plans for the exhaust such as a header?
@RefineMovement
@RefineMovement 6 жыл бұрын
I’m happy you’re looking forward to it man, sure appreciate you hangin around! It’s going to be so cool. So the header that I got with the d16 looks to be some generic 4/2/1 ebayish header. But it looks way better than a stock manifold so I’m going to use that to get it running. From there, I’d like to look into getting some piping created or see what kits are available. Any suggestions?
@zacharysalanga7048
@zacharysalanga7048 6 жыл бұрын
You need to get a z6 ECU and Wiring harness because you need a harness that is wired for vtec
@RefineMovement
@RefineMovement 6 жыл бұрын
Yeah. I haven't shown it in the videos yet but I have a z6 ECU and I'm going to wire the vtec straight to it
@kitsherwinrombines8061
@kitsherwinrombines8061 4 жыл бұрын
do you have to remove coolant when you remove the intake?
@RefineMovement
@RefineMovement 4 жыл бұрын
There are some lines that are connected from the intake to the cylinder head so yeah, you will have to remove those. It’s not hard, but yeah, you’ll want to drain the coolant and put new fluid in
@MikeKollin
@MikeKollin 5 жыл бұрын
Nice... liked the music at the end. Nice touch... What song was that?
@bullsmulla9069
@bullsmulla9069 5 жыл бұрын
I want to swap my y7 manifold to the y8 do i have to change the injectors to
@moxine_
@moxine_ 4 жыл бұрын
I don't know much about this car but generally you want your air fuel ratio to be even and adding a bigger intake with stock injectors would make the AFR lean. Not that it really matters since the ECM would try to balance it out by increasing the pulsewidth of the injectors but bigger injectors would keep the ECM from having to compensate.
@jwilkey86
@jwilkey86 6 жыл бұрын
i just did my head gasket and water pump the intake manifold gasket was so stuck i just sanded it off with a eletric sander
@AngelRodriguez-uw4nw
@AngelRodriguez-uw4nw 6 жыл бұрын
J W. How is that intake .leaking or not?
@CHEETO33
@CHEETO33 6 жыл бұрын
I've done a couple swaps on my own and i ALWAYS label my harness... even each injector -_______- Haha.
@RefineMovement
@RefineMovement 6 жыл бұрын
So it just seems like a good idea right lol. I agree with you man. Just gives you that peace of mind, no confusion.
@jameshunt5316
@jameshunt5316 3 жыл бұрын
I possibly should label my wiring harness but rather I bag and label all of my bolts and nuts when engine removal/replacement
@arthellstrobles1241
@arthellstrobles1241 6 жыл бұрын
👍🏻👍🏻
@morganwright1535
@morganwright1535 Жыл бұрын
Nice star wars paper towels
@freeshavacado7378
@freeshavacado7378 6 жыл бұрын
That slo motion purple power tho!!!!
@RefineMovement
@RefineMovement 6 жыл бұрын
lol you know it!
@xae7816
@xae7816 2 жыл бұрын
All that work just for the inside tire to slip when breaking
@karlsolitario8013
@karlsolitario8013 6 жыл бұрын
@max.racing
@max.racing 3 жыл бұрын
@1Blackman82
@1Blackman82 3 жыл бұрын
Diesel works better for rust
@Nj888chu
@Nj888chu 2 жыл бұрын
yall just remove the entire engine/transmission like it was nothing..... i need to replace my rear main seal too . prolly will cost me $1k.................whelp
@deerhunter703
@deerhunter703 5 жыл бұрын
Turn off the damn background music
Civic EG hatchback build - Year 1
10:33
Refine Movement
Рет қаралды 34 М.
How To Put A Y8 Intake Manifold On Your D16Y7
32:00
BrotherBoost
Рет қаралды 14 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
Will A Basketball Boat Hold My Weight?
00:30
MrBeast
Рет қаралды 124 МЛН
Всё пошло не по плану 😮
00:36
Miracle
Рет қаралды 4,7 МЛН
REAL 3D brush can draw grass Life Hack #shorts #lifehacks
00:42
MrMaximus
Рет қаралды 12 МЛН
How to fix a honda idle issue (6 common issues it could be)
7:26
Texas Honda Channel
Рет қаралды 397 М.
Honda VTEC Engine Assembly  - D15/D16 Mini-Me - Part 1
15:15
Rising Boost
Рет қаралды 306 М.
Restoration of A Honda Civic Ultimate Build
31:20
Mad4Motors
Рет қаралды 3,8 МЛН
Swapping D14 Intake Manifold To D16Y8 ! - Civic Hatch
17:42
mullac720
Рет қаралды 43 М.
HOW TO INSTALL A SKUNK2 MANIFOLD & COMPARISON TO STOCK
21:23
TURBOTRISTAN
Рет қаралды 41 М.
BUDGET 1995-2000 CIVIC HEAD GASKET REPLACEMENT (209) 305-1672
41:08
Gasket masters
Рет қаралды 490 М.
Intake Removal (D16)
9:12
QC CarBuild
Рет қаралды 14 М.
1996-2000 Honda Civic Valve adjustments
25:08
NutzAboutBolts
Рет қаралды 395 М.
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18