INTAMSYS FUNMAT PRO 410 - BUILD & TEST PRINTS

USA Shop: 2.ht/u ::: CAD Shop: 2.ht/c ::: FREE Support Forum: 2.ht/s
Printing Services ::: 2.ht/p
Get your Intamsys here...
3dprintingcana...
Follow Us On Social Media:
Facebook: / 3dprintingcanada
Instagram: / 3d.printing.canada
Twitter: / 3dprintingcan​​​​​​
Our Address:
36 Ditton Dr., Unit #3
Hamilton, Ontario
L8W 0A9
Telephone:
[phone]
Sales Email:
[e-mail]

[@radugrigoras]

Depending on the price I would say that the Modix Big60 in the back is a better machine. But the Modix does suffer from some serious design flaws. The gantry is weak as hell, that should really be boxed up with two linear rails and 4 20x20 beams, next thing with that machine is the extruders are weak sauce, who gets a 600mm cube machine to print with a 0.4mm nozzle at 80mm/s. Nobody. I’ve upgraded mine with a super volcano and hemera, the gantry still leaves much to be desired but I’m pushing 80mm/s with a 1mm nozzle 1.2mm width and 0.7mm z height. I’ll be building my own machine on the next round considering I’ve now got experience after changing all the wiring to go from duet2 to 3 with an expansion board and setting up the input shaping with the accelerometer. Rest is just buy parts and assemble.

[@mackrealla8419]

I was thinking about building my own dude ! What you said is real talk 24,000 pl being cheated!! However, would you be willing to assist?

[@prozix3d]

It really depends on what you are planning to print. This machine is specifically designed for high-temperature materials. The heated chamber is the most costly component.

[@robertbuckner2353]

$ ?

[@Davide-il3ou]

If i’m not wrong it’s around 29.000$