A true sealed cold air intake. This setup should keep the iat's lower on track day for sure.
@RevHighDriveHappy2 жыл бұрын
I have a track day in like 2 weeks it’s in the 50’s here now so I should be good but I’ll have to wait till next year to see and real results
@lukeskywalker184017 күн бұрын
I can’t imagine this would be the stock directions? This must be some custom work because this looks pretty convoluted.
@RevHighDriveHappy17 күн бұрын
@@lukeskywalker1840 the intake is a pretty straightforward install. The only part that would be different is the intake arm. You can order a stock, integrity, R and take arm, and it will go straight on.
@bobanmilisavljevic78572 жыл бұрын
I've been thinking about doing a bunch of spot welds, like you did with the rivets, on my integra while I have it apart. I'm nervous about it rusting on the welds but I think if I prep the metal and prime it right away it should be ok. Your vids on it really make it seem worth it to stiffen the chassis up and would give me a lot of practice welding little spots. I figure might as well try and learn everything I can on this chassis since it isn't perfect. Thanks for all the content, it's helped so many times already 💪
@RevHighDriveHappy2 жыл бұрын
Glad you enjoy the videos… just make sure if your welding it doesn’t get to hot because it can warp the metal also the undercoating could catch fire
@DIY-Sy2 жыл бұрын
Nice man!
@RevHighDriveHappy2 жыл бұрын
Thanks 🙏
@judsonchatham51022 жыл бұрын
great vid. bought and installed because of op.
@RevHighDriveHappy2 жыл бұрын
Can’t wait to run these at the track in 10ish days
@Sheenhunnit6 ай бұрын
I have a non vtec b18 in my sedan integra I know we lack vtec would you say this Intake is better than those other aem short rams / cai setups for a full bolt ons b18 non vtec or stock
@RevHighDriveHappy6 ай бұрын
I like this more because it draws colder air over a short ram There is a dyno video on KZbin for this intake
@Sheenhunnit5 ай бұрын
@@RevHighDriveHappy yea that’s true and I did see that vid of this intake and it made power fr 👍
@stanislavponomar25882 жыл бұрын
Badass!!! Bro, where are you going to order the ITR intake tube from? I have the Icebox filter to go into the stock box and plan to make my own bottom snorkel. But I don’t want to use aluminum for the tube for the same reason you mentioned.
@RevHighDriveHappy2 жыл бұрын
Heel toe sell the intake arm
@UnfazedOutlierGarage10 ай бұрын
How do you like the intake? I’m planning to get one for my eg
@RevHighDriveHappy10 ай бұрын
I love it… when you 1st get it there is a lot of oil on the filter, you have to keep wiping the intake box down and tube but that’s not really a big deal I got mine from heel toe auto
@JohnnieIsBored3 ай бұрын
How do you like it so far? Any good performance?
@RevHighDriveHappy3 ай бұрын
I love it clean and simple set up as for performance check this video out kzbin.info/www/bejne/sIPTaXZubtKrfZYsi=D_vGmLbxF-BhY0nH
@miguelparrilla90656 ай бұрын
Where I can buy this ice box? I like for my project ek.
I’ve always had the white one but it has a wiring problem i’m in the process of swapping whole harness out
@juantrejo70844 ай бұрын
Where did you bought it from? Can you give me the information please.
@RevHighDriveHappy4 ай бұрын
Air box www.heeltoeauto.com/comptech-icebox-cold-air-box-94-01-integra-all-330-121.html Filter www.heeltoeauto.com/air-filter-universal/ct-engineering-comptech-high-flow-air-intake-94-01-integra-w-stock-airbox-310-009-com.310-009.html Intake arm www.heeltoeauto.com/index.php?p=product&id=205119 I don’t have the intake arm I bought a 3” 45 degree and a 3” straight to make my arm from Amazon
@JohnnieIsBored3 ай бұрын
Do you know if the intake can cause a hydro lock in raining season?
@RevHighDriveHappy3 ай бұрын
There are holes in tube so it should let water drain