Great video and information. Especially for LS swap and 700r guys. Thanks!
@chevyrider2473 жыл бұрын
Great Video. This made me go ahead and order one.
@sandyphillips69133 жыл бұрын
Been watching you videos from the beginning thanks for all the help you have made my build seam easy
@LonniesGarage3 жыл бұрын
Thanks for watching. I pray that u have a good turnout on yours.
@peleger12 жыл бұрын
I'm nearing completion on my 76 sierra. All is going well except I'm having complete difficulty threading the oil pressure sending unit in. Old one came out easy, didn't feel like I jacked up the threads, and I can't even get the original on started. Frustratrd.. Great video though, best one I've seen on these hauges!
@josephburnham46213 жыл бұрын
Thanks buddy. I’ll be putting mine in soon into my 87 r10
@kevinrichards32883 жыл бұрын
I don't see many of those generation Chevrolet & GMC fullsize trucks out on the roads anymore like I use to back in the day.
@LonniesGarage3 жыл бұрын
I agree and the demand for them is high right now. Everyone wants them.
@FrankReynard8 ай бұрын
Nice work. Really complicated for my brain tho
@VictorRodriguez-rj1rv6 жыл бұрын
Thanks for the video. You make it look so easy.
@Amy-wh3dt6 жыл бұрын
That truck is looking great
@LonniesGarage6 жыл бұрын
Amy R Thank you
@kevinAuman13 жыл бұрын
My gawd what a badass truck!!! Wish I had one like it lol hell id trade my mint show truck for a square body LS swapped, mine is a 1 owner 03 gmc Sierra rwd 5 sp manual lowered all black with 80k original miles and a folder with every record and receipt since new including orig window sticker!!! Rare truck to find one this year with LS V8 manual and such low mileage and in show truck condition
@LonniesGarage3 жыл бұрын
Send me some pictures on Facebook
@kevinAuman13 жыл бұрын
@@LonniesGarage email me Kevin dot auman 2059 at gmail
@kevinAuman13 жыл бұрын
@@LonniesGarage just sent some over
@familymann19565 жыл бұрын
It turned out nice 👍
@thorAXE1374 жыл бұрын
Thank you for all the videos you have made. It has helped me a lot doing my own ls swap in a 1986 k20 hopefully one day I'll be able to shear it running. Is the gauge still working in your son's truck? I've read some bad reviews for this gauge but can't afford anything else.
@LonniesGarage4 жыл бұрын
They are off on the numbers and the RPM works sometimes.
@thorAXE1374 жыл бұрын
@@LonniesGarage thank you for the response! I may look into getting a dakota cluster
@dylanborn53663 жыл бұрын
I got a set of these gauges for my LS swapped 1975 K5 blazer and got everything hooked up. All of the gauges work except the Tachometer. Noticed in the instruction that it said I had to order it specific for the LS. Didn’t know anything about that. Just wondering if you had to order your gauges specific for the LS. Sweet video, helped out a lot.
@burningbridgesthesilvershi24904 жыл бұрын
So I twisted all the purple wires and ran them to the dimmer but you ran 1 only what have I missed I need help!
@eddymarkle4 жыл бұрын
Great job and great truck. I don’t have that knowledge and even time to install something like that on my 83 C10. Any idea on what type of shop would install this? Mechanic...body shop...auto electrical shop?
@LonniesGarage4 жыл бұрын
Try your local shops.
@mariecoharris76245 жыл бұрын
Installing the same cluster in My 1985. I have 2 buttons on mine. What's the other for?
@Trelazel6 жыл бұрын
Hi thanks for video. How did u get the intellitronix temperature sensor to seal without leaking? You previous video u used equus sensor.
@xs1179 Жыл бұрын
Did you have to pin in the tachometer into the computer? Or did you run everything off the original truck harness?
@LonniesGarage Жыл бұрын
The ls harness has a tac wire that runs on the 4k loop
@OlympusHeavyCavalry6 жыл бұрын
Why didn't you solder and heat shrink the wires you were connecting to the new plug purchased for the gauge setup?
@LonniesGarage6 жыл бұрын
Because I was testing this setup out. I have since did that. The gauges are working well so I've decided to keep them in the truck.
@mdw71224 жыл бұрын
Is this just for an LS swap or can I use this unit on my stock 83 c10?
@LonniesGarage4 жыл бұрын
U can use it for stock as well
@austinheard60745 жыл бұрын
My gauges don’t zero out at the beginning
@ngstahl4 жыл бұрын
What size wheel and tires?? Looks good
@4low15 жыл бұрын
WELL I see that you went back to the intellitronix gauges I was just trying to find a wiring diagram to help wirer them in any help with that would be nice thanks
@LonniesGarage5 жыл бұрын
They come with the wiring diagram
@4low15 жыл бұрын
sorry I was looking for the truck side @@LonniesGarage
@jonathanleonard657 Жыл бұрын
@@4low1 did you ever find anything
@Mikkllosuave4 жыл бұрын
Love you channel great work,wondering if you used the speddo adapter , cuz i need one cant find around here.
@LonniesGarage4 жыл бұрын
No I didn't use the adapter. I am running a 4l60e. It has electronic trans.
@Jay-zk7xk4 жыл бұрын
You have a part number for that quick connecter to unplug the gauges ?
@LonniesGarage4 жыл бұрын
I think it's on my parts list on my Facebook page All Around Kustoms
@devotedanaheim157510 ай бұрын
How they working now after all these years
@LonniesGarage10 ай бұрын
Like crap
@devotedanaheim157510 ай бұрын
@@LonniesGarage you wouldn’t recommend?
@arvinb.19176 жыл бұрын
First of all great looking guy you got there! I get the wheels are 20” but what’s the drop on it? I have a 73 c10 sitting stock and I can’t make my damn mind to weather drop it 5 inches or more?
@LonniesGarage6 жыл бұрын
Arvin B. 5/7
@hannahj50205 жыл бұрын
How does the fuel gauge read like are the numbers the percentage of fuel level or what?
@LonniesGarage5 жыл бұрын
Yea
@ktcarroll47236 жыл бұрын
I just purchased a 84 shortbed roller what size rims you running on the white Chevy? I will be lowering it 4-6 inches eventually and installing a 5.3 or 6.0 ls hopefully
@LonniesGarage6 жыл бұрын
Kt Carroll I'm running 20x8.5 on front and 20x10 on rear.
@ktcarroll47236 жыл бұрын
PuppetKicker yeah I should have read the comments you were already asked that question but Tku
@eduardopakinganjr14584 жыл бұрын
Is this the chevy that you built through out the step by step videos? The blue one? If so, damn! Looks good. Didn't you have the suburban cluster in here?
@LonniesGarage4 жыл бұрын
Yes this is the same truck. Yes I had a 90's suburban cluster in it.
@eduardopakinganjr14584 жыл бұрын
That looks good man. I was going through your vids because I thought I something a while back about adjust the throttle cable on that truck and then I saw this and had to check it out. I watched alot of the build until I finally started mine.
@jadrinue80854 жыл бұрын
Question my tach reads 300 at idle. How fix that error
@mototrxsr38462 жыл бұрын
What tool did you use to trim your instrument clusters to fit the gauges?
@LonniesGarage2 жыл бұрын
A Dremel with a cutoff wheel
@grissomd125 жыл бұрын
So looking into going Digital on my 79, been debating on Dakota or this brand, how has your experience been with them? What would you go with now after all is said and done?
@LonniesGarage5 жыл бұрын
It all depends on your budget. You get what you pay for.
@grissomd125 жыл бұрын
Well I don't want to have to keep replacing gauges, would rather pay $700 and no problems than paying $300 and headaches.
@thelordofrabies2 жыл бұрын
I was thinking of getting these for my 74. How well are they holding up? Any problems?
@LonniesGarage2 жыл бұрын
I would not recommend them at all
@lazy4life6782 жыл бұрын
@@LonniesGarage Bummer man! I watched all your videos and got motivated.. Was going to pull the trigger and do it. Shame they didnt hold up as well as we were all hoping for. Appreciate your videos and your honest updates.
@Fluffdawgg2145 жыл бұрын
Did you have to trim the gauge cover to fit over the gauge cluster??
@LonniesGarage5 жыл бұрын
Nope
@williamcannon81363 жыл бұрын
I'm thinking about putting these in my ls swap c10, did you have any issues with them?
@LonniesGarage3 жыл бұрын
Some are off on the readings but they look good.
@joeyshadden18004 жыл бұрын
What did you do for the gas guage you didnt comment on that in the video, was it plug and play or did you have to modify as well
@LonniesGarage4 жыл бұрын
I've covered that in videos previously to this one. I showed me making a 91 burban cluster work and the intellitronix gauges.
@joeyshadden18004 жыл бұрын
@@LonniesGarage I've watched that and screen shotted your stock wiring diaphrams of what the cluster wires are. And I watched you put all the sensors in and I watched you plumb your gas tank. on a stock tbi truck all that's involved in hooking up the fuel guage would be just splicing the wire in or would it need aftermarket fuel level sender? Along with the sensors that come with the digital guage kit
@dinisrodriguez015 жыл бұрын
I have an 84 c10 what size drop kit do you have on it and what brand. Also what wheel and tire size?
@LonniesGarage5 жыл бұрын
20 inch rims. I'll have to look at the tire size. The drop is in my videos as well
@dinisrodriguez015 жыл бұрын
@@LonniesGarage thank you
@jorgemedrano4494 жыл бұрын
Good afternoon sir good looking truck you got there can you help me on the 12pin connector I don't have the connector and I would like to do it wire by wire it is any way that you have the chart of wish wire's connect together I appreciate if you can help me with this
@LonniesGarage4 жыл бұрын
I got the plug off of ebay.
@jorgemedrano4494 жыл бұрын
@@LonniesGarage did you have the name or part number please
@LT3Fluffy4 жыл бұрын
How did you set up the electronic trans with the speedo?
@LonniesGarage4 жыл бұрын
Vss wire.
@LT3Fluffy4 жыл бұрын
@@LonniesGarage sorry I dont know this but is it a 3 wire that just adapts to the same 3 wires going to the cluster? Havent looked since the swap
@HookedUpCatfishing6 жыл бұрын
Ok I'm confused did you go back to the inteletronix gauges? I saw a video where you swapped it back to a 90-91 cluster because of the way they worked I want to upgrade mine but want something dependable. If these are problematic I will go with Dakota digital or similar brand what would you suggest?
@LonniesGarage6 жыл бұрын
Yes I went back with intelltronix. I love the look of them. I've been running them for a while now and I'll have to say I have had problems.
@randelclawson76956 жыл бұрын
What would you say the issues are with these in your truck Lonnie? I've got an 83 C10 I'm looking to get new gauges for.
@dalesmith52586 жыл бұрын
Where did u order them from I have a 1974 Chevy truck I like to order me some
@LonniesGarage6 жыл бұрын
Dale Smith you can get them from their website or eBay.
@kidclassic15345 ай бұрын
Everything works on mine except my speedometer
@ntgreat56 жыл бұрын
Do they make one like that with the turn signals an everything I need one for an 88 toranado
@LonniesGarage6 жыл бұрын
Not sure. They might.
@ntgreat56 жыл бұрын
Was yours the whole board?
@pxrcalator7527 ай бұрын
Does anyone know how to fix the rpm gauge?
@LonniesGarage7 ай бұрын
Yup. Get a Dakota Digital cluster and toss the others in the trash.
@jeffreyjones36565 жыл бұрын
Is it still working well?
@LonniesGarage5 жыл бұрын
RPM has quit and some of the readings aren't right.
@Amy-wh3dt6 жыл бұрын
1st cool
@xxuponafenderxx5 жыл бұрын
Would this work on a 1979 El Camino???
@LonniesGarage5 жыл бұрын
You can get in touch with them to see if they make a set for it.
@rafatrill6 жыл бұрын
Nice, what size wheels and tires are u running?
@LonniesGarage6 жыл бұрын
Rafael Sanchez 20x8.5 245/45r20s on the front and 20x10 275/40r20s on the rear.
@rafatrill6 жыл бұрын
PuppetKicker do u recommend that tire package I got the same wheels just got them? And did u have any clearance problems?
@LonniesGarage6 жыл бұрын
Rafael Sanchez yes I would go with that size again. No problems at all
@RickyJimenez-tn8gy6 жыл бұрын
Are you no longer using the 91 cluster?
@LonniesGarage6 жыл бұрын
Nope
@jesseduncan18394 жыл бұрын
Hey buddy what color is your sons truck
@LonniesGarage4 жыл бұрын
2k high build primer gray
@jesseduncan18394 жыл бұрын
Lonnie's Garage (Puppetkicker) thank you. Working on mine. Your video’s have been very helpful
@the_chosen_one28315 жыл бұрын
Would you prefer this or the Dakota?
@LonniesGarage5 жыл бұрын
To be fair I've never had Dakota. They look nice but the price is outa my rang.
@the_chosen_one28315 жыл бұрын
How accurate are those gauges?
@adamdailey49693 жыл бұрын
@@the_chosen_one2831 I have never had my gas gage work or my water temp gauge. Id never get it again.
@the_chosen_one28313 жыл бұрын
@@adamdailey4969 so your saying the intellitronix no good?
@adamdailey49693 жыл бұрын
yea_ datsdennis I won’t use them and I am actually looking to replace them. They sent a rice size diode to soter in and 4 different temp sending units and none of them worked. That’s just my experience since we put them in 2 yrs ago
@stewartmossholder86005 жыл бұрын
What is the fuel gauge reading
@LonniesGarage5 жыл бұрын
What do u mean?
@russellholler13225 жыл бұрын
What is that connector that you use to wire in it in two