Interesting making 30Amp battery charger

[@RODALCO2007]

Can't see the primary coil. The taps are taken off the two main winding coils, so it is technically an autotransformer/charger. Important to have the polarity correct at the mains plug. Hope the diode connections were soldered and the twisted joint between the coils are crimped or clamped with a split bolt.

[@chilledoutpaul]

ermmm, I didn't see any solder yet alone an iron, and I would have used crimp connectors where I could. It goes to show how the regulations are in their country.

[@Mr.ky89]

High-capacity transformer products, everything created by hand, is very wonderful

[@alimechs]

Buhat acha kaam kartay hain aap 👍 Jo kam kar rahay hain woh bhi or jonaap videos bana kay humain dikhatay hain woh bhi

[@creativework]

thanks for your valuable comment

[@michaeltreadwell777]

Amazing - such 'basic' connections - just twist the wires ! These people are actually incredible at what they do, all by hand too. Hats off to them 🙂

[@creativework]

thanks for your valuable comment 🙂

[@DivanEXPERTSS]

Серьезно? Они даже не спаяли диоды! Развалиться по дороге

[@Бомберман-ф7х]

Они паяльник изобретут лет через 25-30)

[@Aleks-u2x5w]

Брак, полная лажа. 😂

[@everythingtv1910]

I like this video thank you for sharing it to view and i wish your channel more success

[@CoolIdeasDIY-qv1nz]

Excellent work and welcome👍👍👍

[@PK-nv4on]

Great workmanship. All hand made. Yoir skills are 👏👏👏

[@olivertaylor8788]

THATS A GOOD UNIT.WELL DONE..

[@phils4634]

I'm sure it works, but . . . . Core losses via eddy currents will be very high, since those steel (not soft iron I note) laminations are not insulated - even dipping the laminae in varnish would do the trick. Coils appear to be varnished (and that's Aluminium cable), terminations are "twist and hope" since soldering to Al doesn't happen, and it appears crimp connections are somewhere in the future. Analogue (moving coil) meters - which are more costly than digital these days, and the things sold in that "shop" - Thanks, but no thanks!! Possibly the icing on the cake was those ceramic fuse carriers - it seems you CAN still buy them from China, along with the high-value 25.4mm HRC fuses.

[@randacnam7321]

Varnishing the laminations wouldn't solve the problem of magnetization/hysteresis losses. And aluminum can be soldered, but it takes special and very nasty fluxes.

[@en2oh]

My bet is that it works exactly as advertised! We think of ourselves as so much more advanced and yet this man and his family will survive the next world-wide catastrophe where many of us won't! @@randacnam7321

[@SHADYYTECH]

those plates have some kind of coating

[@ИванИнтереснов-ц2л]

Great job. Well done. Well done. I would buy one for myself!

[@Wowmechanics1]

The Art of Precision Mechanics"

[@malikasghar5311]

MASHALLAH ALLAH PAK BARKAT DAY AMEEN

[@R-78_MK]

А диодный мост пропаял или так оставил?

[@Alex23092709]

Так и оставил. Само сварится при включении.

[@SaimaZaheer-f9v]

Your work is very good

[@creativework]

Thank you so much 😀

[@Mancingsopi]

👍👍👍 dari Indonesia 🇮🇩🇮🇩🇮🇩

[@papajoeymofficial]

Kakaiba gumawa magaling idol

[@AlexisReyna-oq5vm]

Mucho.. saludos cubano en mexico muy eselente vuen trabajo

[@ChessTricks.]

Good job keep it up 😮

[@mirzasunnymughal9338]

Out put k liye low quality low guage wire keya yeh itni amp nikal saky ge?

[@gp1076]

всё на карачках... всё на полу... покажите им стол, кто-нибудь....

[@alegator]

Abdul premium charger !!!!!))))

[@phitolabal69]

Geser sedikit meledak..❤❤❤

[@JohnSmith-bf1bz]

Пользоваться паяльником ещё не научились. Диоды паять кто за них должен?

[@subrat40]

Good, Intresting

[@GeorgeAlbertJantskhi]

După inginerie e la fel ca înainte, bateria e coaptă și lăsați cei de la fabrică să o pună pe 🔥 să scoată sulfu din ea.

[@mattikaki]

So he didn’t solder the wires. That cannot work well.

[@__senggolbacokbro351_6]

BLM TENTU SEORANG INSINYUR. ELEKTERO BISA MERAKIT INI. 😊 SEHT2 TRS BWT KITA SEMUA AMINN AMINN SLM DRI SYA 😊 MADE IN-DONESIA . ... NKRI HRG MATI MERDEKAA😊😊

[@nonameyoutube4509]

เล่นกันแบบง่ายๆแบบนี้เลยนะครับ 😁😆😅

[@syaripuddinsalamat6745]

BERRY GOOD JOB

[@fedegonzalez8407]

No usan papel pescado para separar los arrollamientos? ese papel común se puede incendiar.

[@Osgood-e4m]

these are perfectly safe, as long as you do not switch it on.

[@ChotuuSian]

Good work 👍

[@fu1r4]

I don't understand how Google can allow these kind of videos. Nothing they do are safe!

[@heindalli1966]

Esa tela que usan debe de ser magica, lo usan en todo jajajajjaaja XD ESE CABLE DE QUE ESTA HECHO ??

[@АлексейКолпаков-о2х]

Кабель сделан из переплавленных алюминиевых банок, а его изоляция из переплавленных пластиковых бутылок. На ютубе есть видео где делают и кабель и его изоляцию.

[@giggling_boatswain]

I read on Wikipedia that technical education in this country is inaccessible to 90% of the population, which is why handicraft production of uncertified goods is developed. These products cannot compete in foreign markets, since mass production of similar products has been established in other countries. And with mass factory production, the price will be low and the quality will be higher, since the factories meet the requirements of state standards for materials and product parameters. But the local population is satisfied with this as a cottage industry. But this state of affairs does not stimulate development. The country belongs to developing countries. I think it’s difficult to talk about development here.

[@muhammadalikashifkhan5556]

As an undergrad enginnering student in karachi i can agree you 110%

[@Jeft21102]

Amazing Handcraft

[@Бомберман-ф7х]

10 акб по 3 ампера. Получается 30 ампер зарядки??

[@raosahab8382]

Wonderful. Good job

[@caseyj789456]

Something to learn from this again.

[@amirarien5473]

Amazing job. 👍👍👍👍

[@seemanazir9811]

Good work

[@creativework]

Thank you! Cheers!

[@taimurkhankhan3172]

How much price plzz

[@Asankasandaru56765]

This is what called a short circuit. No soldering, poor insulation. Overtime those copper cables will get oxide and lose the contact.

[@fellpower]

WHAT A MESS - wow, look at this shop. these ppl in this countries wont work in a good, safe and healthy place....

[@sxyrx7]

no switchmode power supplay ?

[@JohnDoe-es5xh]

Nope, SMPSs will break down too early / soon.

[@jurgenjager8657]

Ich bewundere die Gedächtnis leistung des Künstlers. Ich würde in dem "Durcheinander" (fiel mir schwer das so human zu bezeichnen) wahnsinnig werden.. 10 Minuten suchen, 10 Sekunden arbeiten

[@ИгорьКалина-э6ъ]

Где купить это чудо?

[@ivancruzluque2795]

Exelentes cargadores felicidades

[@JOSELUI]

GENIUS.

[@Бомберман-ф7х]

Трансформатор алюминием мотать?? Они знают толк в извращениях.

[@thestudantshadeesqran3419]

🔌💡💥💥😮

[@happytime6181]

and they’re going to build Tesla car👍

[@старыйосколзарисовки]

жуткий монтаж. скрутка на трансе будет греться.

[@КонстантинБохин]

Какая скрутка.. там песец там диодный мост без ПАЙКИ собран просто провода воткнули в аноды

[@siddiquiaalaminetwork5396]

جزاک اللہ

[@richarddodds9326]

I wish I could buy one, the new ones suck with the little pcb's resistors capacitor and a real battery charger needs ampmeter& voltmeter which are rare

[@runteam6355]

aluminum wire

[@АндрейСтёпин-ъ5ъ]

ООООО, а паять оказывается не нужно !!!!! Бля, я пол жизни просрал !!!!!!!

[@ri.plashov]

Пойду выкину паяльную станцию и два паяльника 🤣

[@pedrovalet1506]

This is the type of business that big companies do not want to exist. It looks like a crazy assembly, but it is a lot of engineering here.

[@uktus4185]

Что сказать - дикие люди...

[@thehijamacentre162]

Good

[@creativework]

Thanks

[@dfgggfg]

Диоды не запаяны, все на скрутках, плюс клеммы из стальных болтов. Хлам.

[@officialVimalKumar]

This should be copper material 😑

[@Alex23092709]

It it the only probem? ^______^

[@jerrysanchez5453]

Just dont drop it...

[@zulfiqarshahjilani]

What about cooling no fan

[@andreabc1469]

intresting

[@සුමිතුරුමිතුරෝ-ශ7ඛ]

Finely i found it

[@srihunterinventions1837]

Battery blaster😂

[@rajeshkumar-mj6ir]

36v battery charger diagram Sar jee

[@ricardoluna4679]

Son cargador arrancador por el espesor de los cables.

[@reginaldosilva-ty6np]

Show de bola

[@jeanlouisarbez3219]

oui mais non lol le rendement doit être très bas

[@strongwind9194]

Жесть 21 век...

[@prasadn3465]

No leg no safety very bad

[@Ann-sj4pt]

Chopped up fingers included.Sad situation.

[@yura5241]

👍👍👍

[@ottopartz1]

Danger box!!

[@SarjinaMoni-o9g]

Jamal

[@martinpetkov4580]

300 years garanty

[@hemantsharma1910]

यू ट्यूब के वीडियो दुनिया के हर कोने तक पहुँचते हैं! मित्र! कोई भी उत्पाद जैसे-तैसे बना कर वीडियो अपलोड कर अपने हिन्दुस्तान को बदनाम न करें? बहुत अच्छे से वीडियो बनाओ?😊🙏 हर कनेक्शन आदि का विशेष ध्यान दें! बेवजह अपनी कमी को दुनिया को न प्रदर्शित करें!! 😇🙏

[@alialmahanawi8409]

👍

[@anthonywallace8534]

Never buy a battery charger 😮

[@MooseKnuckleMike]

W.T.F. Am I being trolled right now?

[@santalex1982]

And they have such a disgusting attitude to work everywhere! It doesn't matter what it is: food, clothes, shoes, cars - everything is done with low quality, dangerous and unreliable for the consumer.

[@rafa_br34]

Lesson learned, never buy battery chargers from india

[@adamsindler532]

Miért szerinted jobb a tescos kìnai szar???

[@alexgreis]

Why not?

[@adicaroline8764]

Pakistan lol

[@markhodgson2348]

Why 😮

[@Prateekroy3090]

Shall we buy from Pakistan 😂😂😂

[@ابوياسينكهرباءوطاقةمجانية]

70%

[@jozefgrman5423]

Unbelieve.

[@PRADEEPGUPTA-tu4jy]

Waste your time 😅😅😅

[@ЕвгенийТранбин-т1щ]

ну не че так вторичка под разное напряжение диоды или тиристоры на плавку я сперва думал что за ерунда в куски люминия а это у них радиаторы

[@gmans2941]

Your hard workers but you build pieces of junk and unsafe dangerous equipment