Interior Finish Carpentry Ep.117

[@HelenaOfDetroit]

The house is amazing for sure. But also HUGE shout out to Nate. Multiple cameras, literally thousands of hours worth of footage to ingest, sort through, edit, export and upload. The cost of the cameras, computers and hard drives alone would stun most people. Great job Nate! You're a rockstar

[@lordjaashin]

Helena, you are my Rockstar

[@Wongburger]

Well said.

[@Lmberjosh]

+1 the house is amazing! Also absolutely agree on all the camera/editing work. Very professionally done. I have a friend who did professional sound engineering work for a number of years and would say that his job was to make everyone else look (sound) good, and if he did his job well no one would know he was there. Nate's job on this channel has sure allowed the great construction and detail to shine in the videos and they are a pleasure to watch. "Keep up the good work!"

[@EricCampbellUAV]

nate is ai

[@bevo65]

“I hope I get it right.” That’s the prayer of every person ever to lay a blade on a board. Thanks for showing a few mistakes in this video. They always happen. The skill isn’t in executing perfectly, but in knowing what to do when imperfection pays its inevitable visit.

[@plumberguy1689]

One of my mentors 20 years ago told me "The mark of a true Craftsman is how good you can fix your own mistake".

[@dee73]

When I come up through the carpenter ranks the Carpenters that I worked around were not teachers they kept their craft close to the bid so I become very observant I hired a staircase guy and told me when I started I became a undertaker and I covered up all my work and I guess in today's language he faked it till he can make it but always strive to be that perfectionist

[@FaceFaceMan]

Very well said. This lesson applies to so many facets of our lives.

[@atch_n_sons]

Thats how I feel when I apply 460v 3ph to 30 ton compressors

[@jameswhitlock5943]

When I'm cutting into something expensive, I habitually say, "Ok, here goes nothing" right before plunging the saw. 🙃

[@Flashtone08]

A good teacher will always teach in the simplest of terms to inch the student into more complicated problems. This series has done just that. Never once felt talked down to and have learned so much about every facet of this property. Seeing someone's intelligence as a result of decades of passion is a sight to see. I'm inspired and likely will never get the ability to do any of this, but the way it was presented encourages me and how I will teach others about the things I'm good at.

[@richarddegaetano9382]

I am a retired union carpenter that worked at the trade for forty five years. The last eight years of my career I taught at our training center. Watching you work and explain, was bringing back fond memories of what I loved to do. Great job you are indeed a finish craftsman.

[@shutton]

man that ken video just kicks different every time you see him overseeing whatever the project of the day is. Having him, a master, as an audience member makes me, an amateur, feel more confident in watching your videos for information.

[@adamcobie4207]

I was about to comment about being happy continuing to see Ken Jordan, however; you bet me to it. Bully to you sir!

[@sma11]

His story reminds me that good health, tomorrow isn't promised to any of us. It reminds me to learn every day, be a better person to myself, my family, friends and the world every moment I live. Appreciate what we have and this gift of life. Cheers

[@ILikeCatsMoreThanILikeYou]

@D G congratulations, you've won the prize for most unnecessary comment!

[@marksmith6104]

I still cannot appreciate enough the time and effort you put into everything. Video production, friendship, quality of trade work, kindness to others, etc. “Keep up the good work”

[@crappymeal]

im for the uk, this show is a nice break from the american chaos our media shows us, proper decent proud americans 👍

[@kevincollins512]

@@crappymeal I’m also from the UK and couldn’t agree more, wonderful to watch

[@crappymeal]

@@kevincollins512 need a uk version with decent tradesmen

[@kevincollins512]

@@crappymeal agreed, have you tried Robin Clevett and Gid Joiner?

[@crappymeal]

@@kevincollins512 nice one

[@Simonfrios]

What makes you great is your mastery of the language of carpentry and of sound thinking. And your “I’m going to speculate” honesty… that’s golden.

[@Paulhuber007]

I find it interesting watching how people do the trim work , every one has their own techniques and differences and none of them are wrong , just different. I’ve been crafting wood for about 40 years now and have my own KZbin channel showing how I trim out houses and pail to your teaching abilities!! I enjoy your videos and your showmanship!

[@Paulhuber007]

@SomeDumUsrName ok let me clarify, none of them wrong that is a true craftsman

[@spudpud-T67]

Dave came to help, how could he not, its called love. And a meal with friends, this is life.

[@JamesBrown-mt5ru]

How true! I worked as a volunteer batisseur (builder) on the fantastic French castle project of Guedelon in 2010. A highlight was having lunch with the full-time craftsmen in their canteen each day. French cuisine and a medieval castle - joy!

[@Corsonmcnash]

@@JamesBrown-mt5ru Sounds amazing James, how'd you end up there?

[@JamesBrown-mt5ru]

@@Corsonmcnash I thought it might be an idea for my own castle of Baltersan in Scotland (on KZbin). Guedelon was the vision of one man who owned a chateau in a nearby village. On his land he had stone, clay, sand and trees. He started the project expecting 30,000 visitors a season. He now gets 300,000! COVID stopped the process of receiving volunteers but that might restart next year. See www.guedelon.fr/en

[@greg9180]

I think your friendship with Ken is something extremely special. I really enjoy seeing him in the videos and really enjoyed the episode dedicated to him. You really honor your friend without condescension.

[@mikew1332]

Having seen that episode about Ken I always look for him now.

[@tonyurquhart8278]

Isn't it such a blessing to have friends who will turn up to help out when you most need it or are struggling to cope. I too have such mates & I thank God for them... :)

[@heathholman2552]

“Like it never even happened” my favorite part of trimming out a house like this is all the imperfections created throughout the process, that I now know look perfect. “Looks like it grew there” is my other go to phrase. Keep up the good work!

[@oldman6085]

I install a lot of base board. Mark with your utility knife- just a small tick near the back. Very quick and precise.

[@badlandskid]

That’s a sharp idea! I can’t believe I never thought of that.

[@bjcombs1989]

Straight to the point!

[@ianthomas1201]

@@badlandskid I can not handle all these puns.

[@badlandskid]

@@ianthomas1201 it's hard to measure up for some people.

[@chrisburns5691]

@@badlandskid they just aren't cut out for it, some may get round the corner and catch up..

[@leozmaxwelljilliumz3360]

Every time I see a new trick it reminds me of this British guy we have in his early 60s that knows just about every way to say time and be more efficient with what we do and that makes my day. No patronizing or arrogance, just a good tip and he keeps humming right along. Who is fast is not always best, lower margin for error and consistency seem to be the winner (and it humbles us young workers better then any " I told ya so" who think we need to go full bore)

[@WilliamFontaineJr]

I appreciate the honesty with which you present your self. I’m a few years older and did not spend as many years working in the field as you but I did enough to put some wear on my body. Had to give up my table saw because my hands no longer do what I tell them, every single time. They are just not absolutely trustworthy and they need to be on a table saw. It’s a pleasure to see you still at it. My time doing larger carpentry projects is over and it makes me enjoy your videos all the more. Been watching from the beginning, Thank you, Keep up the good work…

[@anttiroppola4414]

My grandfather was a gun at that. Taking care to slow down at eye level, knowing how much tolerance to trade for speed in areas further from the eye. His looesest, fastest work was still better than most, and the parts you notice or touch, just superb.

[@talltimberswoodshop7552]

Everyone needs a friend like Dave.

[@brantmorgan4390]

Everyone needs to be a friend like Dave

[@casycasy5199]

if i know the house is getting carpet i mark all the stud locations on the floor before the sheet rock goes up.it save lots of time for everyone locating them after

[@crappymeal]

was thinking this myself

[@sma11]

Yes, with a fat pencil mark. I mark measurements on the floors and studs and take lots of pictures. Knowing where wires, blocking and pipes are months down the road is a gigantic time saver.

[@crappymeal]

@@sma11 this aswell 👍

[@dtemp132]

Any reason you’d limit this to just carpet since the subfloor is getting covered up regardless?

[@sirstickjcs]

@@dtemp132 Usually carpet goes in after finish trim and other flooring like hardwood and tile go in before trim. So if you put marks on the floor, there is a good chance the finish floor will be installed over your marks so that they can no longer be seen. I gets very tricky. Sometimes you can mark the floor, then after drywall go back and mark the wall as well. But even then most of the time the walls are primed and cover your marks as well. So a lot of the time it is just easier to find the stud later, rather than try to mark them ahead.

[@ramanshah7627]

"...that I was sort of sinking." Oh, Scott, I'm down there with you. I've been working on the fight against this virus for almost a year at a 52 week/yr tempo, and between the overwork and the case numbers I'm seeing, I had a rough day here. This video brightened the end of this rough day. I'm sorry for the sensation of sinking and I'm thankful you're seeing this enormous project through with Dave and all your other helpers. Sending hugs.

[@AtHomeDIY]

I really enjoy seeing the gentleman sitting there smoking the pipe in many of these videos. It makes me think that working on this particular site is almost as calm and relaxing as watching these videos from afar. What a joy this whole process has been.

[@cliffgrimes895]

One thing that I really appreciate about your style is that you are not condescending or reprimanding. I must admit I sour rather quickly on KZbin craftsman that tell the viewer “if you are not doing it the way that I do it, you are an ignorant rube.” I like the way you just lay your advice and experience on the table and we choose what to do with it.

[@Sprezzatura1]

Watching this video right to the end, made me realize there's still good, great Americans left in this world nowadays. Thank you, Sir!!!

[@joelness]

I can't hear any words because that entryway is just deafeningly crisp and clean!!

[@spectatecomment7306]

I loved 18:00. This showed a real craftsman. Scott was pleased with his results, and probably put more hours into that top plate than necessary but he used some nice material that he'd been saving for just such an occasion. I hope the new home owners watch every one of these videos, they'll be amazed at the pride and skill that has gone into their house.

[@tMatt5M]

This is an all time classic episode of EC. I'll be coming back to it for years.

[@briansheedy5779]

It’s very refreshing to see a true craftsman so beautiful work!! You show the REAL side of things including the things that go wrong and how to deal with that. This is EXACTLY how every job goes and the finished product is flawless Keep up the good work!!

[@arlienorwood]

As a homeowner craftsman who has ventured more than once into framing and finish work, I have to say your videos are awesome and therapeutic. I love to do the work I'm watching but Ive never done it with a master, so seeing the lessons I've learned confirmed or learning new tips is just really enjoyable. Thank you for the effort these add to your work.

[@milesharlan1]

It is a good day when you can wake up & watch an Essential Craftsman Video on KZbin!! Love all of your videos..Keep Up The Good Work!

[@thadh4085]

You know Dave is a real friend because he filled his nail holes.

[@pogs966]

What was he using to fill those holes? Ive used a variety. Just curious.

[@davidhamilton7628]

@@pogs966 looked a lot like bondo to me ?

[@thadh4085]

If I had to guess I'd say pink spackle that dries white. I only say that because Bondo is difficult to sand in my experience and spackle seems adaquate in this situation. Once again, only a guess.

[@Samir2345]

Thank you. This is what I needed today. Been stuck in bed for a week, I can't wait to get my projects started again. Thank you guys. The food/stories I wish will be very good in my future too, as I hope they continue to be in yours.

[@NiftyMCD_Australia]

Been watching the spec house project from digging the foundations all the way through. Thoroughly enjoy and a touch envious of the team, skill and commitment every one shows. I have very poor skills and a body that just wont cooperate, you know, the spirit is willing, the flesh is not. Can't wait to see the completion of the project and the sale / auction and I'm sure you will make a nice profit. All the best from Sydney, Australia

[@bassjumpblues3631]

I spent my life doing just this. Thank You for reminding me! I fell into health problems as an old school carpenter..

[@zacharybaker695]

I would always recommend an 18 gauge Brad nailer for trim. 15 is huge and mostly unneeded except for door jambs My 2 cents as a finish Carpenter in Oregon. 👍 Been looking forward to the trim videos.

[@millertime267]

18 gauge for the jambs all the time

[@matthewwilliams1450]

No 15 gauge everything 5/8 and thicker but I will say that the brand of gun you use makes a difference on the install.

[@gewoonmijnglasvullen]

​@jami w To complete the saying: “A jack of all trades is a master of none, but oftentimes better than a master of one.”

[@m.d.d.3051]

I was thinking the same thing as I was watching. I always 18 ga into jambs. 15 ga into studs.

[@HANDYMANHEADQUARTERS]

Agree. I use 18g brads for all my trim. Always seems to be the sweet spot for me.

[@Eger118877]

You're a very lucky man, Nate. I lost my father to cancer when I was a kid. I'd give almost anything to get advice at certain times. I know that you appreciate what a gem of a father that you have.

[@HighPeaksHome]

Boy oh boy! Could i ever use a Dave right about now! Thanks for the insperation. This is a major undertaking for a one man show.

[@EmperorGeiseric]

I recently started watching most videos on KZbin at 1.5 speed, but not yours. Your videos give me a reason to slow down, relax, and learn something new as life seems to be getting more and more busy these days.

[@citylockapolytechnikeyllcc7936]

Another great video To add to your topic; custom and semi-custom doors with an mdf core prove far more stable than a mortise and tenon solid wood door. The mdf is wrapped in thick enough wood to provide the appearance, and edge durability. This is not a veneer, but a wrap that brings about a double layer of 5/8 and finish thickness 1-3/4" or greater door thickness. Sound deadening is excellent, door is nice and heavy ( use good hinges ). With doors now taller than ever, warping was a huge problem with solid wood doors. Materials science plus craftsmanship solved this.

[@TheTickpicker1]

Great time watching this vid it was like a trip down memory lane, nice to see your old friend there I understand his joy of just being there. Looking forward to the tile vid's I spent most of my years in home construction as a tile contractor.

[@bernardvanwyk2238]

It’s been great watching this episode. Hanging that amount of casing and doors done this way is quality work. As a tip I usually pin on the casing onto the door jams with the door on face side. Pre pack the hinge side perfectly plum. Door goes on quicker with less nailing and more accurate spacing as the casing stabilises the jam at them same time keeping the fitted door in place. I really enjoy your videos. God Bless you and your family.

[@user990077]

10:23 Another stud finder is a stack (3 or 4) of those strong little round neodymium magnets and use the stack to find a sheet rock screw.

[@rhymereason3449]

Yep, I find that works like a charm... those magnets are so strong you get within an inch of the sheet rock screw and they snap right to it.

[@jum5238]

For some of us tech weenies, I pulled an old hard drive apart and took the neodymium magnet out, coated it in painters tape, with a flap on the end for grabbing. Keep it on my fridge, and use it to find nails in studs. LOVE IT! Haven't pulled my two stud finders out in years.

[@ethanheyne]

I was using only one neodymium magnet and couldn't hang on to the bugger. Dropped it from where I was on a ladder a couple times, lost it and had to go fetch another. I finally just stuck it on the head of the nail I had ready to check my stud edges. Works well.

[@daviemaclean61]

You can never have too many Dave's helping out! Good man.

[@dcrog69]

Ken is blessed to have a friend like you.

[@libertarian1637]

With bypass door tracks I like T-nuts and machine screws; no chance pullout with normal use and no screw fatigue pullout, even with pine. Crescent makes a nice plier nail puller; they’re maybe 10 pliers with a 1/4 round protrusion so you simple grab the nail and roll. If the wood is real soft you can put a putty knife index the 1/4 round; it pulls nails well from both front and back. I like my Bostitch 15 gauge FN nailer as it has an ai blower to clear dust as well as a flip out plastic measure that instantly sets you to 16” and makes shooting baseboard quite quick and easy.

[@rpavlik1]

"content yourself with complicating their short, miserable lives" - oh the emotion is strong in that statement

[@paulkelly1702]

Scott, you are a man of many talents, learned over time and with experience. I wish high schoolers had a vision of that being in the trades could be so rewarding.

[@keithreay]

Learned a new use for the word Worry in this video… wonderful as usual. Keep up the good work.

[@John-hj2mv]

Can't say exactly how much I've enjoyed this whole series. Thank you!

[@mcdlb181]

Food and music are two of my favorite ingredients , can’t get enough of your content.

[@michaelmiller1109]

I love the best of humans building stuff together in these videos.

[@worldwidewes8411]

This guy is so articulate. I have a feeling he may make more with his new sales career vs his previous construction career. Either was EC is so beloved and an absolute treasure of a person. We love you EC!!! You deserve all the success in the world

[@m.d.d.3051]

Oh, I know that feeling of "sinking" as you get close to project end. Especially a big project.

[@NomenNescio99]

I'm the first person to choose wood over MDF, but I still think the arguments used against MDF were not entirely fair. High quality MR MDF stands up to water just about as good wood does, small dings can be fixed using a good (epoxy or polyester) filler, some sanding and paint. MDF is even more dimensional stable than wood and the boards are even more straight than perhaps the very most expensive wood boards. I used to be very much against the use of of MDF for anything, but I warmed up significantly since I started to use the little more expensive high quality MR stuff and also using a little thicker boards than what I would have used if building something wood or ply. MDF cuts nicely, takes paint like a champ and the boards are straight. MDF do have some advantages. My views are based on woodworking/cabinet making as a hobby rather than real carpentry work.

[@ADBBuild]

Agreed. I think MDF gets a bad name because people often confuse it with particle board. Definitely not the same product.

[@dustyandsneezing]

I was skeptical for a while but I’ve grown to like MDF for its advantages when suitable.

[@krenwregget7667]

you can use Bondo to easily repair MDF, I've done it plenty of times.

[@alexwbakker]

If you cover MDF in penetrating epoxy to soak in, you can make _very_ wear resistant parts that machine easy before finishing. Still I hate MDF dust.

[@adamcobie4207]

For me a big reason to avoid MDF is the concern over carcinogens and feeling the need to wear a respirator when cutting it.

[@brandonpaugh922]

Love the content, but I really loved the way you said "this ain't cheap" so eloquently and in the same breath you made it abundantly clear that it is worth the price. Machinist quality lumber is to die for. My boss is peculiar when it comes to a 1/16' difference, until he's not lmao.

[@matteberry58]

Thanks for the tip on the trim supplier. I had gotten to the end of the house build videos but you weren't done yet and I thought maybe you guys finally wore out and decided not to film to the finish line. So glad I was wrong! Having a jobsite lunch with friends can only be beat by having the meal be Thai. Good stuff!

[@dan__________________]

That intro was amazing. So well said. I ripped all of the MDF out of my house and replaced it with custom moldings made from finger jointed pine. It has been absolutely amazing and clearly withstands use better than the MDF products for the exact same reasons you stated.

[@rippinyouapart]

Who would dislike this video? Im baffled..this guy is smart and talented beyond a lot of people out there. I think i just said the reason why people dislike this video..jealousy. Great work pal

[@rossbuchanan7632]

@Essential Craftsman "I was sort of sinking"- Not surprised man. You've been going on this nigh on 4 years, trying to give us all the benefit of your 50 years in construction carpentry. I reckon you've a right to feel a little tired and jaded- but remember ecc 9v10- and hope He sends someone to share the burden.

[@-clif1987]

I love this guy. Man I laughed when he said he was going to get out a finish saw and pulled out the isolating tool. Not really a great straight cutter for finishing but it looked great. Thanks

[@MatthewWebb62024]

I hope people are not missing the amount of mindfulness that is taking place in these videos. It's what makes these videos so special.

[@jaredbrooks7658]

You can also search for studs with a strong magnet. If there's a nail in there, you'll feel it with the magnet.

[@toobad9946]

I'm glad you mentioned "easing" (I've always called it "softening") the edge. It makes the finished work look "finished". It's a step many people miss simply because they don't know. I usually do it with medium grade sandpaper. The goal is to remove sharp edges. For larger pieces like window stools, I'll use an 1/8" round over bit. Depending upon the size of the work/application sometimes I'll use a 3/16" or even 1/4".

[@Allen-eq5uf]

I experience a complete sense of calmness watching your videos.

[@johncoelho5225]

So! Regarding pulling out the nails. I score them with a break off knife at the base of the exposed nail and they break off easily without causing more trauma.

[@m.d.d.3051]

Nice tip. I'll have to remember that ...

[@EHCcarpentry]

I’ve done really big projects in Idaho and Utah and I always recommend them to your videos to see the quality I spend my life to put out.

[@BradenFredrick]

I love the way he articulates everything perfectly

[@EricCampbellUAV]

ai is amazing

[@michaelmcclamroch7486]

It's aggravating to carry two trim guns but if you use an 18 gauge brad gun to nail into the jambs it's less likely to split at the edge.

[@sheldonvogt5212]

.?? I always have a 15 ga. Finish nailer, 18 ga stapler, 18 ga Brad nailer and 23 ga pin nailer on all jobs. Never aggravated by that!

[@carlwells4989]

It sure makes a huge difference, when you’ve framed the structure that you’re trimming !

[@tylerpeters1181]

I saw on an episode of this old house, before they did drywall, they went around with a can of spray paint and put a line where the studs were on the floor. I imagine that would be helpful for the trim guys as well as the drywallers.

[@surveysays8335]

I forget where I saw that, but I remember thinking "Why wasn't I doing this 10 years ago?"

[@surveysays8335]

@jami w It's always worked for New COnstruction for my trim guys with the exception of 1/4 round, but you're nailing into the trim at the point. . We always did base before floors. I wouldn't want my Trim guys to have to come back. I wonder WTF is going on with your sites that you can't get your trim carpenters in before floors.

[@chrisburns5691]

@@surveysays8335 I am used to always doing trim after floors are in. Base and casing goes tight to floor, door jambs tight to floor, etc. with exception of carpet where base can go in and gets packed off the subfloor.

[@rahGrebelsoulsound]

And that's one of the reasons that I never use a 15 gauge nailer to install decorative trim! I only use 15 gauge for weight bearing, heavy use situations like door jams, window stools, & stairs. I only use 18 gauge brads & 23 gauge pins for decorative trim. No splitting & no big mole holes to fill.

[@JamesSims]

I love your work and your presentation of it. You are superb. And I know in my heart that while I probably will never meet you, you are my friend. Keep up the good work, indeed!

[@mcboomsauce7922]

"its better to be lucky than good" lol gramps....you got some real awesome quotes

[@kato2531]

Pad Thai for lunch on a construction site ? there must be biscuits and tea in the afternoon. Now that’s a site to work on. Great job guys, thanks for sharing. And keep up the good work

[@saltydroog854]

In regards to that Bosch saw... I have it. I generally only use it when I need a 12" saw for a rare piece of crown I can't cut nested with the 10". I run a Festool Kapex as my everyday driver, which is a tip top of the line 10". What the Festool pioneered, that the Bosch Axial Glide is trying to replicate in it's own unique way, was a forward facing slide mechanism so the slide mechanism does not impose itself on the back of the saw forcing you to keep it off the wall so it can be swung left and right. The Bosch solves this with it's fancy arms on an X/Y axis. All in all I think it's a great design. I also has a nice ergonomic control for locking and unlocking the miter deck, and the bevel action. HOWEVER...where the Bosch fails is in the detents of the miter deck. both the tooth that locks it in place and the plate with the detents are made of plastic. I have not broken them, but they have work to having a considerable amount of play in them. This is just about a deal breaker. I now keep it in my shop and use it exclusively as a 90 cut off saw. I got it dialed in and have the lock pressed down, and don't dare unlock it. The next time I need a 12" saw, I will be buying the new Makita, which also has a forward facing slide mechanism, more like the Kapex's. And I recommend to anyone that is in the market for a miter saw, avoid the Dewalt and Milwaukee saws from Home Depot, and have yourself a close look at the Makita. You'll spend an extra $100-150 on it compared to a Home Depot grade saw. But if you aren't going to make the investment into a Kapex (which is well worth every penny), the Makita is the next best money spent in my humble opinion.

[@greglawrence742]

Love the music selection Scott! Don't notice it's there until your engrossed in the video and find your feet tapping to the beat. Your choices would make an incredible play list. Thank you very much, and keep up the good work.

[@steventicknor8059]

I am lost now I can’t believe Mr Essential made a mistake. Lol! I was always taught the greatest craftsman’s are the ones who can make a mistake look like it never happened. Love the channel keep it up!!

[@saltydroog854]

As a trim and finish carpentry contractor, I highly suggest using 2" nails as your bread and butter, as opposed to 2.5". It's impossible impose on the middle 1" of the stud, where the wiring and plumbing may be. And you will always get enough meat with a 2" nail to fasten whatever millwork you are fastening.

[@thegodemperorofmankind7yea704]

Tip: mark your studs on the floor in front, transfer some dots onto the wall for nails before you cover your marks with flooring

[@jimfeaster4837]

Your a gem of craftsmanship I enjoy very much !

[@agoogleuser1594]

That front door looks great. I just replaced a lot of trim in my house and I made everything flat which was a pain. None of the walls were straight so the miters where tough to get right. The way you did it here with 1/4" reveals looks better and seems like a breeze to install.

[@timort2260]

Thank you videos like yours always gives me some hope I'll find a job in construction that those I work with appreciate the work and desire to do good work. I've been in and out of construction for about 10 years and there isn't many people like yourself or the crews you work with. Good and honest

[@TaysGamez]

!I watch these when i get home from work. Which says something about the quality of the channel. best on YT..along with AVE ofc.

[@roccoconte2960]

Nice to have friends like Dave they come along as you say when your sinking and you need help , great job and nice video.

[@a-yates]

Only mdf product i used in my home was the crown molding The rest my my trim i made from pine 1×8s then I could rip in half and make 2 from one and my base was 8in so I had the base and the trim just had to router some and make it pretty Love your series I went with a craftsmanish style in my home since it was originally built in 1903 Your videos pushed me to do more and try new things that I have never tried or thought I was able to accomplish but its done now and the wife loves it hahaha

[@Elkadetodd]

Learned another new trick. The feather board to hold the saw blade stable.

[@d.ricc6421]

You can use pine instead of hemlock in the head of that door track because we use longer screws to go pass the 3/4 pine board and right into the 2x4. We never depend on a 3/4 jamb to hold a hanging door with a track, you need to put longer screws, simple fix, use pine.

[@LeadRakFPS]

Love to see it. Having good company as fellows workers on a job while eating lunch can make just about any meal good.

[@HisHigherness8472]

My favourite guy! Thanks for all your help!

[@cweakley]

03:20 I found out the hard way that MDF and water don't mix. I used it for baseboard in a kitchen and it's really taken a beating from mopping the ceramic tile floor. I would try the product he recommends if I had to do it again.

[@chrisburns5691]

pvc is a good option for kitchens

[@OldBullRanch]

Oh man....it makes me miss the days of trimming out houses with other grown men. It was great...

[@joeyfromfuquay5634]

You continue to amaze me with you wisdom and honesty in these videos. I’m truly inspired by the content you put out. Thank you and God bless.

[@BramowitchIII]

The main thing I learned from this series is that when they say that it takes a village to raise a child, it also takes a small village to build a modern house. So many people with different expertise are required to create a complex product like a house.

[@Trezker]

@jami w To be fair, back in the day they didn't have code, regulations, permits, plumbing, electricity... We have complicated the process of building houses quite a bit.

[@hogfit]

@jami w With due respect, I can't count the number of times I have heard a young guy say "I know how to do all this stuff" only to find out later that he only kind of knew how to do some of it. I'm 42 years in my trade and still learning and changing to accommodate all the new technology. I've cased out a window before, doesn't make me a finish carpenter by a long shot.

[@mattberg916]

It may take a few trades to build a house because of efficiency of knowing one trade very well, it certainly does not take a village to raise a child. It takes a man and his wife

[@somepeoplecanthandlethetruth]

@@mattberg916 sometimes his wife has multiple personalities, so she counts as a village!

[@NexusCapital]

Moments like the end of this video are some of the best times of my life. I don’t take them for granted.

[@ConnorBlackwood]

"A nail is a good studfinder if you can cover up the hole" I feel like that applies to a lot more things than intended lol. "Daves a good studfinder, we threw him through the wall and could see every stud! We just had to replace the sheetrock after!"

[@steveoulman634]

Lovely Port Orford cedar. Nicely done. (Please add a splitter, riving knife or blade guard to your table saw.)

[@SteveDiamond19]

They both just get in the way for certain things but totally agree they should be there, even if they need removed sometimes.

[@chefofthejungle179]

Your framing series just got me my job. Thank you sir

[@dakel20]

Man, pad thai, pad ped, and drunken noodles are some of my favorite dishes of all time. Great video as always, and the house looks amazing. :D

[@russianacorns8080]

Crispy pad Thai is my favorite meal of all time they fry it somehow and make it as crunchy as a pretzel with the same flavor as normal. I wish I knew how they did it.

[@TheNormanmurk]

I've been a carpenter for 24 years and I'd love to work w this guy.

[@gregdyar6451]

Ya great to see sensei oversee things. Great job.

[@WayneSmith-yf3fg]

Depending on where you ar ein the trades, the term "The painter will fix it." is a given. But when I learned to finish hardwood floors in the '60s, my boss said that if you flick the cord and leave a mark on the wall, you were going to fix it because the painters were done & gone!

[@Josh-of-all-Trades]

I always say that it is OK to make mistakes as long as you know how to fix them. Thank you so much for showing me how to fix this!