Interior Trim in Luxe Forged Carbon - Chopped

DISCOUNT INFO BELOW!!!
I installed the Luxe Forged Carbon Chopped Metallic vinyl in my dashboard and center console trim to compliment my new Forged Carbon Steering wheel. Each piece took just over an hour to wrap and the results were amazing.
Originally I wrapped it and left the silver trim ring around the edges and I was not happy with the results. You can see photos in the video at 0:19 so I peeled it off and wrapped the entire trim piece.
This is not an instructional video, but I do offer a few tips and as requested I show the entire wrap process for both pieces. Be sure to check out the Awesome Color Matched Paddle Shifters from CCH Customs and my new Forged Carbon Steering Wheel.
🔴 Luxe Auto Concepts Stuff (affiliate) 🔴
1. Luxe Forged Carbon Chopped with Metallic Backer - bit.ly/3o2wdGc
2. Luxe Stainless Pro Cutting Knife - bit.ly/39K5Foq
3. Luxe White Squeegee with optional buffer - bit.ly/3sR4NWI
4. Luxe 3-piece Micro Squeegee Vinyl Applicator - bit.ly/321yadn
5. Luxe Soft Mini Squeegee - bit.ly/3umNOfk
Discount Code - WorkPlayDrive
🔴 Required Tools (Amazon Affiliate)🔴
1. Porter Cable Heat Gun - amzn.to/3mpd3Lo
2. Interior Trim Tools - amzn.to/2Guli7K
3. 3M Knifeless Finishline tape - amzn.to/3dDp2ks
🔴 Paddle Shifters from CCH Customs (NON-Affiliate) 🔴
cchcustoms.com/
Discount Code - WorkPlayDrive
Tools can be found in my NEW Amazon Affiliate Storefront
bit.ly/WPDToolS...
▽ WorkPlayDrive Approved product Discount Page
www.workplaydri...
▽ My Video Recording Gear ▽
bit.ly/WPDRecor...
▽ Advanced Audio setup ▽
bit.ly/WPDRecor...
🔴 WorkPlayDrive APPROVED Products 🔴
Luxe Auto Concepts
I'm a Luxe affiliate your purchases save you money and help my channel
Get your tint kits here bit.ly/2lYCvux
5% Discount code WPD2022
~*~*~*~*~*~ Folow us ~*~*~*~*~*~
www.workplaydri...
/ workplaydrive
/ workplaydrive392
/ workplaydrive
2008 Dodge Challenger 2009 Dodge Challenger 2010 Dodge Challenger 2011 Dodge Challenger 2012 Dodge Challenger 2013 Dodge Challenger 2014 Dodge Challenger 2015 Dodge Challenger 2016 Dodge Challenger 2017 Dodge Challenger 2018 Dodge Challenger 2019 Dodge Challenger Widebody Hellcat Demon Widebody Scat Pack Dodge Charger 2005 Dodge Mangum R/T AWD
~*~*~*~*~*~ Music Info ~*~*~*~*~*~
Background Track
KZbin Audio Library - TFB9 - Vibe Tracks
KZbin Audio Library - Broken - Patrick Patrikios
KZbin Audio Library - Vishnu - Patrick Patrikios
KZbin Audio Library - Kurt - Cheel
End Screen
🎵 Beats By Shocka252 🎵 / livinproofsoldier
/ amongstkingz252

[@davidrosenblum2178]

Hadn't seen that placement for the ProClip mount. I went with the one the situates it to the right of the infotainment screen. The carbon fiber looks great!

[@WorkPlayDrive]

Thank you, that’s what I love about them, so many options 👍

[@JuniorWA]

such an amazing job. and i noticed you have a USB-C cable sticking out from the trim on the left side of the steering wheel. how'd you do that?

[@WorkPlayDrive]

I used an extension to run it under the center console, under the wheel and just tucked it into the seam between the panel and the trim.

[@fiouable]

Good job. I guess it’s good therapy for you. I just don’t have the patience. These days, to relax, I use bourbon and I play tennis.

[@WorkPlayDrive]

Thank You, My vice is coffee so it keeps me going ☕️

[@jaystepp150]

This is great tips. I tried to wrap the same panels on my RT to Mimic the engine turn panels on a bandit Trans Am. To no avail. I was trying to use one piece for the entire panel.

[@WorkPlayDrive]

I'm sure with a lot more experience It can be done in one piece, but I'm just not there yet...

[@gilsgarageofficial]

I was hoping this was real carbon fiber.

[@WorkPlayDrive]

There are a few guys doing it you just have to look around Instagram. I wanted to do it and vinyl to see if I liked it first.

[@Ptivities]

Does the wrap stick to the material on the trim? A local wrap shop said it might not if they wrapped it

[@ShaksWD]

Looks identical to the genuine forged carbon. I’m just wondering if it’s printed or when you move side to side do you get that shifting effect?

[@WorkPlayDrive]

Yes it’s printed and the most realistic I’ve seen to date. If you order it printed on the metallic vinyl it does have the depth and shift making it even more realistic

[@ShaksWD]

@@WorkPlayDrive thanks 👍 I’ll need to give the film a try

[@scotts6596]

Serious Kudos for the effort and Results. Distinctive, sporty and elegant ! Styling you'd find on a million dollar exotic. 👌

[@WorkPlayDrive]

Thank you 🙏

[@rodrigoduenas2853]

Looks insane congrats, how similar is it to real forged carbon? On camera you can’t really tell the difference. Also how does it feel to the touch?

[@WorkPlayDrive]

Most realistic I’ve seen yet. It’s smooth to the touch no texture.

[@mpresto15]

Watched your video a few times will be trying to do the same for my charger when my wrap comes in thanks for the tips

[@WorkPlayDrive]

Enjoy 😊

[@adrianpollins5661]

How much was the wheel to get customized

[@WorkPlayDrive]

Just over $1000 with shipping from Japan.

[@chrisss9991]

You only used 1 5x3 piece? Or how many total did you order, great work btw!

[@WorkPlayDrive]

Thank you, yes just 1 piece.

[@Von_SRT]

@@WorkPlayDrivefor some reason I don’t have the option to use a metallic base material only white and clear, will it look different?

[@chrisss9991]

@@Von_SRTsame problem I’m having smh they never updated their inventory

[@darronchristopher9949]

Dag this is nice. How long did it take for your steering wheel to get done?

[@WorkPlayDrive]

Thank you, it took 9 long weeks 😵 from the time I shipped the core out.

[@phillipmcknight8569]

Very nice. I hope mine will come out just as good.

[@WorkPlayDrive]

Good luck 🍀

[@7D9Z28]

Great content.......as usual from WPD! Thanks for sharing your knowledge!

[@WorkPlayDrive]

Much appreciated!

[@tommer12698]

@@WorkPlayDrive great channel &Videos. on a different note on the color matched engine parts, you have toxic orange ? some of those parts are not sold at scalia but are on custom billett store however they do not have toxic orange. how did you achieve all the parts in one color

[@WorkPlayDrive]

All the Scalia Motorsports parts are toxic orange. The billet technology parts are orange anodize.

[@Von_SRT]

Which size did you order ?

[@willboyd8021]

What was the item you use to hold your iPhone I’m trying to find that link

[@WorkPlayDrive]

The mount and phone holder is made by Proclip. here is a link to the mounts for the Challenger. www.proclipusa.com/vehicle/dashboard-mounts/dodge-challenger/2018 you can also purchase the phone holder based on the phone and case you use along with other options like charging, magnetic, etc...

[@SGTCantu]

I love it!

[@musclecarsrt2324]

Can you send a link to show where you got the cell phone holder. Ty

[@WorkPlayDrive]

The mount and phone holder is made by Proclip. here is a link to the mounts for the Challenger. www.proclipusa.com/vehicle/dashboard-mounts/dodge-challenger/2018 you can also purchase the phone holder based on the phone and case you use along with other options like charging, magnetic, etc...

[@The_Nameless_Entity]

Always love watching your videos. Aloha Bud!

[@WorkPlayDrive]

Thank you!!!

[@ozxsemx]

Great job.. looks very good. 👍

[@WorkPlayDrive]

Thank You 🙏

[@Dboi253]

How much materials did you use thank you for the video much appreciated bass ass install

[@HEMIRAM]

Looks great! Going to have to try this!

[@WorkPlayDrive]

Thank You

[@dougwatson6406]

I checked there web site and I don't see any dash bezels?

[@WorkPlayDrive]

Lol they sell the vinyl, you wrap the bezels yourself.

[@willboyd8021]

Very nice

[@noahpeters1851]

I’ve been wanting to do this to my car for a long time beith preformance parts makes some really cool CF but it’s expensive. Might do this first to get a feel of what it would look like .

[@WorkPlayDrive]

Beith is costly, but they are one of the best in the business. This is the first step for me before committing to sending my bezel out to have it overlayed in real forged carbon.

[@noahpeters1851]

@@WorkPlayDrive absolutely and I might do what you currently have on your car looks very clean great video as always

[@WorkPlayDrive]

Thank you 🙏

[@antdogg2617]

Do u have a video on how u set up the phone vent holder with the iPhone cable

[@WorkPlayDrive]

No sorry I just placed a soft pry tool in the gap and pushed the wire in to hide it.

[@antdogg2617]

@@WorkPlayDrive do u mind sending me a pic of your set up

[@shawnroberts7060]

Awesome wrk my friend.!!!

[@WorkPlayDrive]

Thank you!

[@miopazzotoddly]

Outstanding! Thanks WPD!

[@WorkPlayDrive]

Thank You!

[@tommer12698]

how did you do toxic orange on all parts ? scalia has the color but dont have all the parts....but billet shop has a burnt orange color and has all the parts .....is it same color different name ? how did achieve this

[@WorkPlayDrive]

The Billet Technology parts are burnt orange anodize. I picked up the Scalia parts afterwards and toxic orange was the closest match.

[@tommer12698]

@@WorkPlayDrive thanks that’s what I thought. I’m trying to do all the inside parts and would of like to get all in one place. Guess not. Thank you.

[@tommer12698]

@@WorkPlayDrive they seem to match I guess it’s a really close match

[@tommer12698]

@@WorkPlayDrive do you have discount code for custom billet store and or Scalia motor sports

[@WorkPlayDrive]

Scalia Motorsports is WorkPlayDrive5. Billet technology has high discount flash codes on occasion. Follow them on Instagram and jump on it when it appears.

[@profmahi]

Where did you get the speedometer and Tachometer red face from?

[@WorkPlayDrive]

The red is the OEM color for the hellcat.

[@profmahi]

I gotta a T/A

[@talechene]

you are a man of class

[@WorkPlayDrive]

Thank you 🙏

[@horazen56]

Good job

[@WorkPlayDrive]

Thank you

[@bonjimmi9544]

Looks great...

[@WorkPlayDrive]

Thank You

[@paulbare6371]

looks great wow

[@WorkPlayDrive]

Thank you 🙏

[@MojaveKY]

Wow, your car looking amazing bro

[@WorkPlayDrive]

Thanks, it’s been a while how have you been?

[@MojaveKY]

@@WorkPlayDrive Doing pretty good considering. Hope to get back into something fun but prices are dumb right now

[@WorkPlayDrive]

I know but on the selling side they’re offering way above what most people paid for their cars new. It’s pretty nuts to see everyone selling their rides for profit.

[@kevyn6629]

Looks badass🔥

[@WorkPlayDrive]

Thank you!

[@batesryan7]

How do you remove the bezels?

[@WorkPlayDrive]

You pop them off by pulling straight up and forward. The center bezel check this video at 3 Minutes 35 Seconds kzbin.info/www/bejne/i5aZn3meoLB5Zqs The Dash Bezel check this video at 1 minute kzbin.info/www/bejne/sHfHkJSpr5hseZI

[@batesryan7]

@@WorkPlayDrive I low key love you

[@WorkPlayDrive]

😂😂🧡

[@seanthomas7211]

Is the steering wheel heated still?

[@WorkPlayDrive]

Nope no heat in the CF wheel. I think Beith Performance is making a heated one.

[@poomuhh]

what size vinyl did you get?

[@WorkPlayDrive]

I picked up 5' x 3' so I can wrap it in a few ways to find what I liked.

[@poomuhh]

@@WorkPlayDrive thanks man, enjoying the content and learning a lot.. keep it up. I have a challenger GT tryna spruce it up a bit lol

[@WorkPlayDrive]

I’d love to get a GT one day as my winter car. How does she drive in the snow?

[@poomuhh]

@@WorkPlayDrive it drives amazing, and I’m not just saying that. I get a lot of snow up here in NY and it takes away the hassle. Aside from the AWD, the weight of it makes it a beast. To add, I don’t have snow tires and went through a huge snow storm lol I recommend!!

[@WorkPlayDrive]

Awesome thank you 🙏

[@willboyd8021]

I’ve been looking through your videos trying to find the item you choose to hold your iPhone