The longest nastiest and most tiring days I’ve had were working on a maintenance crew at a light weight expanded shale/clay aggregate plant. When a kiln goes down 9 out of 10 times its about to be a long dirty day and night. If it’s really effed up that day and night won’t end until long after the next mornings lights. The things we’re willing to do for a dollar is mind blowing. Be safe out there y’all.✌🏻
@bidyasagarprasad92363 жыл бұрын
Very nice 👍👌👌👍👍 working to steel kiln.
@kxsteve5 жыл бұрын
Add an oil circulating pump. Tap the drain port, run oil through a filter and plumb it to spray oil on the top of the shaft. It reduces heat and friction.
@GlobeTrotterJAY5 жыл бұрын
True, I agree with you
@thegastromar4 ай бұрын
The bearing is already damaged, nothing will help for long! It should be replaced
@pandianmanickam71686 жыл бұрын
Why supporting roller not rotating some time. Between supporting roller and tyre clearance also found good, may be journal bearing issues are there?
@GlobeTrotterJAY6 жыл бұрын
You are right, it’s coz of high journal bearing temperature
@pandianmanickam71686 жыл бұрын
GlobeTrotter JAY sir Make it oil circulation system, it will reduce oil temp and make it skew, why we can't try water path supporting roller
@GlobeTrotterJAY6 жыл бұрын
The support Roller was installed keeping less bearing clearances, the issue was later resolved by replacing the bearing maintaining appropriate clearances and machining the Support Roller shaft as it had developed grooves.
@madalaranjith17034 жыл бұрын
It's the plant lightup condition un balances of kiln shell temperatures.First check the kiln shell ovality.and alignment take the supporting roller and bearing condition.changed oil from 680 to 1000 synthetic oil.if u required
@craxd15 жыл бұрын
When things get hot, they tend to seize up, especially sleeved rolling elements. Water cooled I take it?
@Akshay31616 жыл бұрын
Bearing and nothing else using a bearing with good creep resistance properties will help possibly.
@GlobeTrotterJAY6 жыл бұрын
Sir this support roller has journal bearing...so no possibility of creep resistance
@dinanathkrshaw95815 жыл бұрын
Very nice . please give me information for mendrive
@danielsuas90956 жыл бұрын
It's the whole drum rotating with the mechanical transmission of the rollers? Or the drum rotates with a chain transmisión around it?
@GlobeTrotterJAY6 жыл бұрын
This Rotary kiln has spur gear
@andryprasetyo86004 жыл бұрын
Why's slipt ?
@-rotarykiln-brickingmachin45793 жыл бұрын
great video
@chandrapoojary19626 жыл бұрын
I wonder why the support roller was rotating intermittent
@GlobeTrotterJAY6 жыл бұрын
The Support Roller bearing temperature was high more than 140 degrees, still plant was kept in operation, this resulted in less clearance between bearing & shaft, causing excessive friction due to less oil penetration and hence Support Roller was rotating intermittently.
@eduardodaquiljr9637 Жыл бұрын
It's stop rotating because the drum ring is not riding already,I have a unique solution on this drawback. 2:08
@devkaser48514 жыл бұрын
Aapne kya kiya phir
@phongdaolexuan5484 жыл бұрын
Bearing damage
@maccc2223 жыл бұрын
Trunions are not true to wheel. Improper load on bearing causing failure
@prembethen19175 жыл бұрын
hi sit thank you
@DeepakSoni-il2is3 жыл бұрын
worst condition of kiln , nobody take seriously , who is plant maintenance manager , has to be came at site and see the condition