International Prostar STOP ENGINE BUZZER… Perfect solution!! Part 1

My trucks after treatment was deleted before I bought it, and after a couple years this STOP ENGINE buzzer kept buzzing for the past three years. I finally got fed up and decided to do something about it! I put a switch on the buzzer. Now I don’t have it frying my brain all day!!

[@felixblain8927]

WOW so easy, but a life saver. thank you man. noted in the history books.

[@urfanmalik3456]

Appreciated

[@nervillerih-reh6824]

You're a genius 👏 😂 . I can't stop laughing as I watch this, considering it is the same thing I have been going through. This is the only perfect video on this.

[@urfanmalik3456]

Hahaha you felt my pain!! Thanks for liking it. It’s an easy job , do it so all your senses slowly start coming back 🤣

[@miltonmickel123]

Ideal fix ❤ been listening to mine for a year.

[@urfanmalik3456]

I’m glad to help 👍 now enjoy the silence 🤣

[@mady4099]

You the men genius 👏👏👏

[@L8terdays]

Thanks man! I wish you would have shown changing the lights. Specifically the engine brake light.

[@urfanmalik3456]

Sorry bro but I never changed any of those lights , I just made that MF stop driving me nuts 😅

[@jaimeherrera1999]

Thank you!!!

[@jayjabaji54]

Man u a Genius i thank u so much

[@urfanmalik3456]

Lol thanks bro 😎

[@gordonb1737]

The low air buzzer doesn't have to work if the low air light works. Has to be one or the other, or both working.

[@hqremiix]

Here in Canada, you need the buzzer as well as the low air light on the gauge. Dot will write you up if the buzzer isn't working

[@bnetrucking4l619]

Hey so your stop engine light comes on, but it doesn’t shut your truck down? I changed my fuel filters trash got in the lines and I blew them out. Now truck stop engine light comes on and shut engine down.

[@guillermoramos1487]

If the pressure, battery, and heat clocks go down, disconnect the computer from the cabinets that are located at the left foot of the driver in the musculoskeletal of the door. disconnect it and blow it and connect it again and it WILL fix the problem

[@wisdumb3092]

So you wasn't losing power when this stop engine light came on cause I do my truck be running perfect right until this stop engine come on than it loses power

[@youssefbenmoussa3788]

Did you check your coolant ?

[@user-ro1bw6tk5p]

Doesn’t your truck go into limp mode when truck has stop engine light ?

[@urfanmalik3456]

No. It’s been running for years with that condition.

[@user-ro1bw6tk5p]

@@urfanmalik3456 I have a 2012 international 4300 w/ max force engine with stop engine light and I checked just about every sensor and fluid levels and it comes back on after about 10 min. When stop engine light comes on we can only go about 30-35 mph . Ugh! I wish I knew how to delete all the after treatment off this truck.

[@kfekadu55]

Someone please explain if you hear this sound just like on the video with out loosing power or anything does that mean the truck is deleted?

[@urfanmalik3456]

It’s not necessarily deleted. Mine was deleted and this sound drove me crazy for 3 years.

[@kfekadu55]

@@urfanmalik3456 thanks for the response I was trying to figure out if mine is deleted got the same year truck with same engine. That stupid sound came on for the first time since I bought it and suddenly gone. But I plan to do same thing you did.

[@APTunning]

If your stop engine light comes on would your truck turn off if you continue driving? All gauges seem to work fine Help please

[@urfanmalik3456]

I suppose that would all depend on if your truck has been deleted…. But all my gauges are normal and drives fine without de rate but the stop engine buzzer has been on for years now.

[@APTunning]

@urfanmalik3456 oh okay well i dont know if my truck is been deleted or not i have the same truck 2010 international prostar with cummis engine and recently the stop engine light came on and i pull over and as soon as i stop the light turns off then is fine again

[@urfanmalik3456]

@@APTunning your problem could just be a sensor issue… because the stop engine comes on only because of specific issues, like the coolant level sensor or the oil pressure sensor or the after treatment ect… you may want to get it diagnosed… might just be something very simple.

[@PaulSJeffries]

Thank you, thank you thank 😊 same isue with my truck

[@aaronpeddicord2944]

On the back of the DEF tank there is a box that has fuses in them one of those fuses goes to that buzzer unplug the fuse takes about 10 seconds

[@youssefbenmoussa3788]

There is no fuse for the buzzer...that's wrong...

[@aaronpeddicord2944]

@@youssefbenmoussa3788 my fuse in fact did go to the buzzer and the stop engine light I have a 2017 International ProStar with the n13 in it

[@racketmaker81]

@@aaronpeddicord2944 which fuse is it?

[@aaronpeddicord2944]

@@racketmaker81 I'm not exactly sure which one it is you have to turn the buzzer on look at the diagram on the box for yourself and pull which one you think it is

[@racketmaker81]

@@aaronpeddicord2944 I did my own little fix. Cut the red wire on the buzzer and ran wires to a switch.

[@issyauto_kyra2225]

Hi there! This is Kyra from Issyauto, a professional brand dedicated to producing the best car parts.We'd like to invite you to do a Dashboard Cover Mat for your 2002-2005 Dodge Ram 1500 review Would you have interest in working with us? Thank you and look forward to your reply！

[@urfanmalik3456]

Sure I would like to work with you.

[@issyauto_kyra2225]

@@urfanmalik3456 Thanks for your reply! How should we contact you?

[@urfanmalik3456]

@@issyauto_kyra2225 [e-mail]

[@issyauto_kyra2225]

@@urfanmalik3456 Got it! I messaged you back via email. Did you receive it?