One of the motor mount mods I'm going to try is to u bolt a 1" 2 1/2 ft long pvc pipe to the back of the motor mount near the bottom of the mount ..... A second mod is running 1' pvc pipe under the emt pipes of the motor mount in 4 different places(see pic ) I'm running 2 pvc pipes along the length of the boat to support a storage platform at the front of the boat and also to use to build a canopy / bimini ... So I'll just add a 5 ft pvc pipe in the back of the boat to support the emt pipes ibb.co/kVi78w
@excursion56426 жыл бұрын
Hi. Was that at full speed? Were you able to measure it? I am balancing between 62lbs trolling motor or a 2.5- 3HP outborder. Costs are about the same for both setups taking in mind the heavy life cycle battery for the trolling motor.
@irainvestor47866 жыл бұрын
Still breaking in the new motor so it was at 75% throttle, phone app GPS said 4 mph avg
@excursion56426 жыл бұрын
Ok thanks. Keep us updated when you have done 100% regarding speed and experience with motor mount.
@irainvestor47866 жыл бұрын
I will.. The motor was still dipping, to almost having the propeller dipping at an angle downward when I went just slightly past 75%.. I have another motor mount mod idea I'm going to try which should help the speed... I'm guessing If I get the motor dipping issue fix I should be able to average 6 mph at full throttle
@excursion56426 жыл бұрын
Hi. Please try this mod if you can. I have thought of that and tested it outside of water. I expect an improvement of 20-30%. Piece of wood around 1/2" thick and hard enough. ibb.co/f6Cs8w ibb.co/mkwxab ibb.co/fFmkTw ibb.co/cDfqvb Let me know
@irainvestor47866 жыл бұрын
That's one of the mods I'm doing but using a 1" 2 1/2 foot long pvc pipe u bolted to the back of the motor mount, it weighs less then the wood
@kiheirc31952 жыл бұрын
What what what! I can’t hear you!
@user-eg5ke8cq2p2 жыл бұрын
Дерьмо полное , ездили на двух одинаковых лодках ,у меня стоял салют 2э идёт в полтора раза быстрее чем этот ханкай.