Intro to Racecar Engineering: 13 Tires

  Рет қаралды 8,695

mechanicaldesign101

mechanicaldesign101

6 жыл бұрын

Smitty shares tips of the trade regarding tires. This is the thirteenth video in a series developed for UCI's racecar engineering program. (Smitty and the Professor series)
mechanicaldesign101.com/smitt...

Пікірлер: 3
@patricksquires6348
@patricksquires6348 Жыл бұрын
Used to CAD some race spindles years ago. Another bit in the whole castor, camber, steering axis inclination, is also the steering arm on the spindle and steering mechanism. Focusing on the spindle itself the arm if the rod is a straight push/pull is that arm should angle from center spindle and axis meet to the center of the rear of the car or forward. as you push on the outside spindle and pull on the inside spindle the rate of change of each spindle will turn at different speeds some . This will allow for tighter turning radius on the inside wheel vs the outside wheel. This allows for less scrub thus better traction. Great videos - Your YT video is of only a few that shares details such as geometry under load should be accounted for. More areas of detail that affects steering geometry is pivot axis location and length of arms attached to spindle.
@slowinfastout3304
@slowinfastout3304 3 жыл бұрын
Hi, I’m curious which has more contact patch between a taller and wider tire. For example 255/40R18 vs 265/35R18? Also if I move up in tire size, does it mean it requires less air pressure? Thanks in advance !
@Zickcermacity
@Zickcermacity Жыл бұрын
Hi SiFo: Robert Pepper has your answer. Succinctly, with wider, lower profile tires vs skinnier, higher profiles, it's the orientation of the patch area that will change the most - by a factor of at least 4:1. Given the same cold tire pressure in both: A narrow, higher profile tire will have a narrow, longitudinal patch. That is, parallel to the direction of travel. A wide, lower profile tire on a monster rim will have a wider, lateral(perpendicular to travel direction) contact patch. The contact patch on the wider tire/wheel package might be, at most, 5-10% larger than on the narrower package, but its orientation is what will affect your handling and feel, the most. And herrrrre, is Mr. Pepper's explanation. While his primary audience is off-roaders, the information here carries over to the street as well: m.kzbin.info/www/bejne/qaGyhpaXit98frs
Intro to Racecar Engineering: 14 Transmission
8:31
mechanicaldesign101
Рет қаралды 9 М.
Intro to Racecar Engineering:  10 Caster
13:13
mechanicaldesign101
Рет қаралды 41 М.
Super gymnastics 😍🫣
00:15
Lexa_Merin
Рет қаралды 67 МЛН
1🥺🎉 #thankyou
00:29
はじめしゃちょー(hajime)
Рет қаралды 80 МЛН
Каха инструкция по шашлыку
01:00
К-Media
Рет қаралды 7 МЛН
He tried to save his parking spot, instant karma
00:28
Zach King
Рет қаралды 22 МЛН
What's The Best Suspension - Soft or Stiff Springs?
6:09
Engineering Explained
Рет қаралды 2 МЛН
กลไก รถดำนา
1:41
นายอภิเดช ข่ายเพชร
Рет қаралды 59 М.
Intro to Racecar Engineering:  03 Strength and Stiffness
10:38
mechanicaldesign101
Рет қаралды 42 М.
Intro to Racecar Engineering: 11 King Pin Inclination
14:42
mechanicaldesign101
Рет қаралды 49 М.
Intro to Racecar Engineering: 16 Performance Ideals
11:01
mechanicaldesign101
Рет қаралды 12 М.
Basic Chassis Set Up 1 - Camber, Castor, Toe, and Ackerman
6:14
SAFEisFAST
Рет қаралды 201 М.
Intro to Racecar Engineering:  04 Chassis Design
10:48
mechanicaldesign101
Рет қаралды 91 М.
Super gymnastics 😍🫣
00:15
Lexa_Merin
Рет қаралды 67 МЛН