Introducing the Maksiwa EDGE BANDER & TRIMMER

Direct link to product:
www.richelieu.... (USA)
www.richelieu.... (CAN)
The Portable Edgebander is designed for convenience, portability and affordability. It features a hot melt glue applicator for use on PVC, ABS, paper and wood veneer edgebanding that is not pre-glued.
Maximum edgebanding thickness of 3 mm and width of up to 3".
Features digital temperature control (adjustable from 120° to 220°C) and an electronic speed regulator.
The required glue works in the range of 150°C to 180°C.
The glue pot has a capacity of 1.5 lb, comes with 1.5 lb of glue and heats in 15 minutes.
Technical information:
Tape thickness: 0.3 mm to 2 mm (1/64" to 5/16")
Max. tape width: 3"
Feeder speed: 18 ft/min
Power: 1.300 Watts
Motor: 1 Phase
Volts/amps: 127 V - 5,9 A | 220 V - 10,2 A
ADVANTAGES AND BENEFITS
Easy and fast setup
Precise cutting of the tape with its integrated manual cutter
Tape support for the tape roll
Inner guide to help align the workpiece before the glue spindle
Tape guide to ensure the alignment of the tape and the workpiece
Rubber spindle guides the tape onto the workpiece at a set speed
Back rolls provide pressure points that help the bonding of the glue and the edgebanding tape
Table guide to help move the workpiece easily over the table
Retractable legs make it portable
Can fit in a standard car trunk for easy transportation
***
Direct link to product: www.richelieu....
The Edge Trimmer Machine trims and scrapes edgebanding applied to MDF and similar substrate material, providing a perfect finish.
Suitable for ABS edges, PVC and others.
Comes with a versatile mounting system that adapts to any kind of bench.
ADVANTAGES AND BENEFITS
Portable
Easy to install and operate
Helps you ensure perfect finishing in your projects
IMPORTANT INFORMATION
Technical information:
Max. workpiece height: 2 3/8"
Table length: 39"
Table width: 6" to 16"
Trimmer speed: 32,000 RPM
Power: 500 W
Volts/amps: 127 V - 4.3 A | 220 V - 2.5 A
www.richelieu.com