I thought it was the 4th of July, didn't realize it was Christmas!
@welcometocattown20363 жыл бұрын
This is absolutely fantastic! Would love to have one for the Sub2000!
@ericb.43582 жыл бұрын
This trigger, in a PC chassis carbine, is a very good home defense weapon. I recommend adding an M-CARBO machined extractor and bolt buffer pad plus a heavier main recoil spring from Tandemcross. Now the action is ready for the increased "abuse" of firing it in binary mode. Did it to my PC chassis carbine.
@fo-fif Жыл бұрын
Did you run into problems without upgraded parts?
@rayjones463 Жыл бұрын
first you have to get the trigger to right and function as advertized
@fo-fif Жыл бұрын
@@rayjones463 waited 2 months too long to order it. Illegal in my state now lol. Gotta love Illinois 😑
@ericb.4358 Жыл бұрын
@@rayjones463 I have this "binary" trigger and it works just fine - but then accuracy falls way off. I took it off B/C I need to compete in Steel Challenge and there are NO binary triggers allowed!
@glennbrown52753 жыл бұрын
I remember asking for this on IG, thank you 😭😭😭
@silverrabbit94933 жыл бұрын
Franklin Armory, Mini 14 next? Pleeeeeeeease!
@robertduncan27423 жыл бұрын
Vr60 12 guage
@A_Ray913 жыл бұрын
Be waiting for this for a long time. Thank you guy
@DjAmerillion10 ай бұрын
Mine kicks ass! My gun was jamming bad and was completely brand new. Was jamming before and after the binary trigger install so I knew for a fact it wasnt the firing mechanism. Got in touch with Ruger, sent it off to them with the binary trigger installed, because it fired right with the trigger, but jammmed due to manufacturer defect. They tested my gun and sent 136 rounds down range with new parts, sent it home to me and the gun fired beautifully! I bet those guys at Ruger had fun on the range with my baby. 😂 Now I know my setup works right, its even been tested by Ruger!! Badass setup. Damn good 🧟♂️zombie 🧟♂️ killer gun! Thanks Franklin Armory for creating such a badass trigger! It's the shit! -A Happy Customer
@garyh79493 жыл бұрын
Finally received mine and installed it yesterday. It was a little difficult for me. Definitely not a drop in trigger. Instructions are not that detailed and photos are pretty bad. No notes or instructions on how to remove the OEM safety. Googled removal of 10/22 safety and it is pretty much the same. The most difficult thing for me was installing the selector switch detent and spring. Lost and found the detent and spring 4 times before I was successful, heh. The other difficult part is installing the trigger return spring and detent. Too bad there are no You Tube videos out yet on the installation of the PC-C1 trigger. Franklin should put up how to videos on their website. I've yet to get to a range and fire it. Hope it works.
@garyh79493 жыл бұрын
@Christopher Hurd Have not shot it yet, but it does pass all the function and safety checks. I was hoping for a lighter trigger pull than OEM, but it is still around the 5½ lbs that the OEM trigger had.
@garyh79493 жыл бұрын
@Christopher Hurd I did take it to the range yesterday. It was flawless. I'm happy with it. Only a couple of cons I can think of. First, to field strip it now, I have to remove both selector levers. Second, if I ever have to return it to Ruger for service, it will be a PITA to reinstall the OEM trigger or risk them replacing the binary trigger and keeping it. Hopefully I will never need to send it in for service.
@garyh79493 жыл бұрын
@@drkronkron3061 Where did you find a video?
@FranklinArmoryBFSTM3 жыл бұрын
@@garyh7949 kzbin.info/www/bejne/naXblneugNyqoNU
@johncox2865 Жыл бұрын
@@garyh7949Don’t send this thing to Ruger. They won’t touch any aftermarket trigger. How do I know? I asked them.
@mattmillerhill3 жыл бұрын
Ordered! Thanks for what you do!
@stackingnpacking9463 жыл бұрын
Can you guys make a binary trigger for glocks?
@lordofgenocidaltendencies42093 жыл бұрын
Same been wanting an auto sear lol
@Thrashmetal21303 жыл бұрын
Got a 3d printer?
@georgemartinez3996 Жыл бұрын
I love all their products.
@mperich0033 жыл бұрын
Awesome. Now please make them be in stock so I can buy !
@hebrewhammer76233 жыл бұрын
Yes! Got one before they sold out.
@rayjones463 Жыл бұрын
tell us all how it worked 1 year later
@DavidGonzalez-pz2xk2 жыл бұрын
Wish they had them already fully installed. Drop and go option to purchase. I don’t trust myself working on those tiny springs and such. Especially the selector part instal. Looks like a pain.
@rayjones463 Жыл бұрын
well dont trust them either
@joebrands85803 жыл бұрын
Just bought one. Man, the 9mm is going to fly!
@rayjones463 Жыл бұрын
hay how did that go did you get screwed to you know cant return it if its been installed and franklin armory will fix it and make it work if you give them enough cash and send it in but beware if they dont like what they see you wont get your trigger group back...and when they want all most 1/2 the price of the trigger assy to make it work like they advertise now your looking at a 450 dollar trigger ....great for them but it sucks to be you............
@chrisgrace14892 жыл бұрын
Just ordered mine
@rickstrandberg63982 жыл бұрын
Finally got are pc carbine!
@jeremyreinhold36202 жыл бұрын
Bought it. Hope I love it.
@A_Ray913 жыл бұрын
It's about time
@chrisgrace14892 жыл бұрын
Thinking about it
@JSMCPN10 ай бұрын
Still gonna wait for the reliability issues to be sorted out.
@gruntcast3 жыл бұрын
Nice!!!
@luivillslugger3 жыл бұрын
We need it for the vr80 please I’ll send you my vr80 to make this happen
@undisclosedbunker97213 жыл бұрын
Washington resident. F My poor pc charger
@lukeywalsh3 жыл бұрын
Curious how it compares in single shot mode. Pull weight, pre-post travel, audible break, crispness and so on. How it compares in single shot with stock Ruger, Tandemkross, MCARBO, Volquartsen (upgrade kits or drop in units) and so on.
@mattwalters68342 жыл бұрын
Good question
@rayjones463 Жыл бұрын
well i bought one and dont like it and havent used the rifle in 6 months or so so my nect move will be to get the volqaurtzen trigger ssy and drop the bfs ii in the garbage were it belongs...
@johncox2865 Жыл бұрын
Love my TK Victory trigger.
@lukeywalsh Жыл бұрын
@@johncox2865 Great. I just popped for a Volquartsen drop in unit. It was discounted because VQ is no longer selling in-box PCC drop in trigger packs. I hear the Victory Trigger is a good bargain. Also, TK Victory Triggers don't interfere with Upriser chassis. I have TK 2-port comp. Light. Easy to clock.
@mattwalters68342 жыл бұрын
Nice
@marktaylor363010 күн бұрын
I would really like to know the pull weight
@jeremyreinhold36202 жыл бұрын
Does that mean everyone who doesnt own one of these is Non-Binary? Should I be listing that on my employment applications?
@garyh79493 жыл бұрын
I tried to grab one when I first saw the announcement. Alas, I was too slow..OOS.
@JK47alamo153 жыл бұрын
I have a Franklin armory binary trigger on my ak47
@DavidGonzalez-pz2xk2 жыл бұрын
I want one!!!
@rayjones463 Жыл бұрын
no you dont they suck
@robertduncan27423 жыл бұрын
About how many times should one switch the trigger settings before it loosens up instead of being tight. Thanks
@Gravelgratious2 жыл бұрын
The american PPSH-41
@jacksonpaarlberg15812 жыл бұрын
Does this trigger work around the "hammer follow" issue like Fostech's?
@rayjones463 Жыл бұрын
no it dont work right at all
@paulwitmer713811 ай бұрын
Is Franklin going out of business? They appear to be dumping with super low prices. Are they bringing out something better or is the ATF threatening?
@floored30783 жыл бұрын
Glock please lol
@Dieguito5073 жыл бұрын
Wow , I need one of those pronto , how hard was it to install.
@garyh79493 жыл бұрын
It took me several hours. Probably a total of 3- 3½ hours. The safety selector and trigger spring detent and springs are especially difficult if you don't have 3 hands. Figuring out how to remove the OEM safety was an adventure.
@hurumordae3 жыл бұрын
M1a trigger when?
@Forest_Actual3 жыл бұрын
Thank you
@WKZworks3 жыл бұрын
Any chance for a Stribog BFS?
@ronburr87123 жыл бұрын
What calibers does this come in, and is it California compliant?
@shaysbro11743 жыл бұрын
It's not Cali friendly
@krisjohnson63553 жыл бұрын
Lol....I'm surprised you're still allowed to have internet access in that shithole of a state.
@jdoggfunderburk12242 жыл бұрын
Bro you really have to ask if this is Commiefornia compliant? 🤣 Just look at it 🤣
@scottoworn Жыл бұрын
Not many gun things are Commiefornia compliant.
@fatboy889163 жыл бұрын
Will you or do you have an install video?
@shirky063 жыл бұрын
Did you figure this out?
@FranklinArmoryBFSTM3 жыл бұрын
@@shirky06 kzbin.info/www/bejne/naXblneugNyqoNU
@jordanknoll28642 жыл бұрын
Did the ATF ban these?
@joshlewis50653 жыл бұрын
So sick
@rickstrandberg63982 жыл бұрын
The fears of not being able to cancel second shot is like outlawing a switchblade cuz yer scared
@robertduncan27423 жыл бұрын
Next 12 guage vr60 or mossburge
@hydrocutty3 жыл бұрын
Be nice if the one in my ar worked...never has been right,always has binded up,now gun wants to be a single shot,pretty shitty
@sean-gf6kg3 жыл бұрын
Sounds like a timing issue, not a trigger issue
@hydrocutty3 жыл бұрын
@@sean-gf6kg it wont even work,let alone work fast enough for me to fire ahead of
@FranklinArmoryBFSTM3 жыл бұрын
I would suggest contacting our Customer Service Department to see if we can help troubleshoot the issue you are having. Our Customer Service Department is available Monday-Friday from 0900-1600 hours (PST) and can be reached at 775-783-4313. Thank you!
@eugeniomoroyoquijr86383 жыл бұрын
Do a glock one
@jtrent39602 жыл бұрын
I have 30 years in the pew industry and my fiance's and I guns neither work
@jw22230 Жыл бұрын
That intro is 40 seconds too long
@LePeterK1233 жыл бұрын
This was on the bucket list... Next is the TAVOR X95!!!