Introduction to Hand Tools: Wrenches

[@SlackersIndustry]

cheater bars are your friend, just dont exagerate 😂

[@fakhrizzaarrifi9375]

great video for my students

[@sondibheem4653]

Tn u sir

[@josepherickson2596]

😅😅😅😅😮

[@morrinhos795]

I'm from Brazil and I learning speak english, and I have a doubt: clamp wrench, also it's called locking pliers?

[@aayesher9400]

Yes

[@Darkshadoz]

Metrics seems simpler

[@berniesahadi8464]

Good video, the speaker needs to do more of them along these lines. He is a good presenter and well understood as he explains the details.

[@ASCProcessSystems]

Thanks, Bernie! We agree; Gumaro did a good job on this one. More videos are in the works. Stay tuned!

[@anitaduna9703]

Really helpfull Thank you sir, September 2024🎉

[@Yui_187]

That was very useful and straight to the point. Thanks for this video

[@Xtopher822]

"Never use a pipe extension or cheater bar..." Well, I'm out of here.

[@parttimeapathet7945]

just brushing up before my mechatronics interview, thank you very much

[@TheRAMBO9191]

Hey Maa, look. I'm learning! 🤣

[@gustav9911]

Great video

[@msfkmsfk]

Great video. I really learned some great and basic information that I should have been able to reason out but I was too stressed out at doing a good job that I wasn't thinking properly. Anyways I really enjoyed this video and I will continue watch more.

[@cesarb2082]

This was so useful and the speaker is the only reason I’m going to look more at this channel

[@TinyTitG]

Xbox or ps5?

[@danielestrada3624]

Great video. The explanation was very clear and well presented to a new user like me.

[@Baileys.small.engine.repair]

Would scrap metal or a grease gun be more used/needed/wanted?

[@rolandodelvalle1381]

frize katal

[@markdstump]

Many people say pipe wrenches ought to be used in pairs!

[@charlesschmuckatelli7888]

Hand tight is sufficient, no?

[@SlackersIndustry]

if you dont, to much force will crush the pipe if not held by the second one

[@agboolajohnson.s.2557]

I love this . Thank you Mr.😊 💓

[@moisesdavila2211]

Completely excellent video! Congratulations!

[@martagraudina6136]

Thank you for this

[@simeonbain7742]

E

[@ericktapia1765]

Love this video. So informative

[@ASCProcessSystems]

Thanks for the feedback! We're glad the video was helpful.

[@kasunnanayakkara793]

Learned a lot. Thank you!

[@THEadhdER]

Awesome just what I needed! Great info

[@ASCProcessSystems]

Thanks. Glad it was helpful!

[@seshafarmspalmarosa1267]

Thank you sir....

[@Sulkanator]

Great video!

[@Sulkanator]

More installments in this series would be awesome. Introduction to Tools: Drills or saws or something else we can learn from the experts.

[@jsilva7586]

very helpful thank you very much

[@amarasrimusik1754]

🔥🔥🔥🔥🔥

[@slgang9700]

wow that's fantastic tool hacks 🤟🤟🤟

[@_dawid]

Very useful video

[@strictlyscapey3261]

I’m certain this will help with the aptitude test I am taking for an apprenticeship 🤞🏽

[@marktwain..1972]

EXCELENT VIDEO, Thank you

[@Life_of_Matthew]

Thank you

[@beingwarrior]

Straight to the point 👍✌️. Thanks.

[@seanmatias1360]

Great video

[@SamStanley-581]

What a fantastic video!!

[@donnam3053]

Great informative video

[@chutidoni974]

Nice wrench hacks

[@SHUBHAM-KEENOO1]

Excellent video

[@followyourheartcharity8151]

Awesome video

[@mariskaboertheater]

Very helpful!!

[@automoney9376]

Thank you for sharing this tricks

[@onranybo8587]

Thanks for ur video, it's useful 🙏🙏

[@joshtanchuling3938]

Is ratchet and socket wrench the same?

[@joshtanchuling3938]

Combination wrench same with ratchets wrench??

[@ShadowBoxer]

1. My understanding is that a ratchet or ratchet wrench and a socket wrench are the same thing. They are a ratcheting handle that accepts different size sockets. 2. A combination wrench is a variation of the normal solid metal wrench that has an open end or jaws on one end of the handle or beam that is sized to fit a specific size fastener. There are versions where both ends of the beam are open or both ends are closed, which means a ring or boxed end that fits completely around the fastener. This usually means two sized per wrench; one on each end. By the way, "boxed end" does not mean square-shaped. Boxed end means "enclosed" in this case and are exactly the same as ring wrenches. Back in the day some bolts were square head so the ring wrench actually had a square or "box" shaped hole. That's my theory as to where the name came from. A combination wrench is a combination of the two; one end is open and one end is a box end or ring wrench. Usually both open and closed ends will fit the same size fastener. A set of combination wrenches will be one size per wrench. So a double open end or double boxed end set requires fewer wrenches because each end is a separate size. I hope that helps. Cheers.

[@Russia789-ef]

I have that one with the like squiggly wrench thingies in the end

[@katherineboll3420]

Not useful in any sense of life

[@smellypantswithcheese]

fun fact: the pipe wrench is used to beat up drug addicts in an underwater city

[@SlackersIndustry]

😂