Every Single Tool You Need To Start Working On Cars! *Full List*

[@drengskap]

A few pretty essential things you missed: 12" steel rule Utility knife Magnetic pick-up tool Magnetic parts bowl

[@DaroriDerEinzige]

That he didn't mentioned a Magned on some sort of flexible extension is mind buffeling for me.

[@bigwrenchgarage1360]

Lighted magnetic pick up tool. Bunch of magnetic bowls. At least a half dozen 10mm 1/4" drive 6 point shallow and deep sockets.

[@cbarajas52]

not crucial but yes nice to have,

[@stever5887]

I'd add a 6-inch steel ruler, for measuring parts in place on the car where space is tight. It's all relative, however; no two people will ever have an identical list. Everyone's needs and wants are different, based on their experiences and what they think they need to do a job.

[@JazielR]

I came into the comments for this exact reason and an inspection mirror or a endoscope and I believe a butane soldering iron is better than corded or battery (imho)

[@willowsendstudios4751]

Finally getting to start my career in automotive and so glad I found your channel. Thank you for the run down on tools I’ve been needing advice. Love how you are honest and speak like the audience is your friend.

[@averykruger7957]

As a professional auto technician I can say that this video would be extremely helpful for any new mechanic or even a seasoned tech. All the hand tools and wiring tools are a must have. The Milwaukee stuff is definitely nice if its in the budget.

[@IIGeminiGemII]

VERY GOOD feedback, bc I wasn't sure if it'd be worth my time to watch this video. Now I know it IS work my time. THANKS MUCH!

[@sasquatchrosefarts]

$4 test light with a sharp probe. If I was managing a shop and a guy didn't have a cheap test light for in case the fancy tools break, I wouldn't hire them. Don't need a whole drawer of test lights, but one as a backup. And bonus points for the $10 harbor freight two lead logic test light.

[@PlasticAddict301]

Yeah I'm starting with just 1/4-1/2" ratchet+socket sets, an impact wrench, and a hammer lol. Anything extra will come as needed

[@MrKongatthegates]

These guys are like you need to spend 10 000. A milwaukee power tool set with extra battery and charger is like 500 - 600 bucks. do yourself a favor and get it

[@mibmophba]

Best advice I was ever given when it came to tools was “buy the cheapest shit to start, if you break it or wear it out. Then you can justify replacing it with the nicer version”

[@YeetxBoi]

That's actually an amazing piece of advice

[@NativePride4051]

Not amazing advice when you got your car apart and you break that cheap tool. Now your stuck without your car for a day or 2

[@mibmophba]

@@NativePride4051 if only there was a way you could borrow a buddys tool. Or have a buddy drive you to the store so you can buy the more expensive version. Or another cheap one as a stop gap....

[@NativePride4051]

@@mibmophba some new comers don't have car buddies. Hell I didn't really have friends or "buddies" to call to get a ride or get a tool. Also how you gonna go to the auto store if you aint got another car. And what if you don't have money for a Uber or lyft to and from the auto store.

[@mibmophba]

@@NativePride4051 if you don’t have money for Uber or Lyft. I guess you’re buying the cheap tools anyway.

[@jayburrough4308]

Don't forget to get extra 10mm lol

[@whiphore]

I find I loose 12 and 13 more as they are genuinely more common on a car in my experience

[@hectorcalderon3011]

The 10mm socket gets lost in the Bermuda Triangle constantly, the crazy thing is once I buy more 10 mm then I find my old ones but when I need it I lose them all.

[@Gabriel.4190]

@@whiphore I don't understand the joke as I've never lost a 10mm simply by putting my tools back when I'm finished

[@harrisonyoung6115]

Literal nightmare back in my ag classes, someone always running off with it, and losing it

[@mikemuzzell5167]

Air hammer.

[@tomsawyer9637]

Long 90° needle nose pliers are my favorite for reaching hard to get hose clamps. Must have

[@andrewkelly3702]

I have a pier of those I found them in my grandpas old tool box.

[@rockyloccgarage2040]

Best

[@katelynlowe3559]

Just bought a snap on pair, Honda tranny plugs are hard to reach

[@ethanwrx2802]

@@katelynlowe3559 just bought the snap on 5 pack of needle noses. Barely used them yet but already love them

[@IamByzer]

The video I didn’t want. But definitely needed. This gets my hyped for the day I buy a house and set up my garage

[@ricardoiglesias8877]

A vise is a must. I don’t know how I lived without one for so long.

[@megatrolltrollington]

12:05 There's really no argument. Just ignorant Americans saying it wrong. The company has commented officially on their name numerous times. It's pronounced KA NIP EX; it's German the "K" is hard, not silent.

[@EpicMel0ns]

One tool I recommend getting is a brake caliper compressing tool so you can do your own brake jobs, very cheap and pays its self the very first use. Also it’s good to have different types of lube/grease around like dielectric, brake grease, silicone paste etc so you don’t have to keep buying those little “sample” packets at the parts store

[@LeverPhile]

A cheap 6 inch C clamp will compress brake calipers just as well.

[@Alucard-gt1zf]

@@LeverPhile try doing that with a 4 pot caliper....

[@cody4873]

@@LeverPhile Good luck using that C clamp on newer cars with electronic parking brakes. Good way to ruin a caliper

[@LeverPhile]

@@cody4873 Right, you'd need to unactuate the electronic p brake motor on the caliper first, before using a clamp or screwdriver. Just unplug the electronic motor and put 12volts across the two pins to release the p brake (generally, always research your car first).

[@cody4873]

@@LeverPhile Using a clamp of any kind can damage the motor. It has to be turned either clockwise or counter clockwise. Only way to properly reset the motor is by manually disassembling the motor and hand cranking it prior to piston retract or put the car in maintenance mode.

[@ericlewandowskivlogs]

Thanks for the list. I've just started getting serious about my tools and actually just started a new job as a mechanic apprentice at my work. After plumbing for 17 years, time to learn and master a new skilled trade. Slowly building my tool kit.

[@Phil60084]

Definitely pick up an impact swivel socket set! The harbor freight set literally changed how I work on cars. I use them 80% of the time now unless it's a deep socket. They dont swivel as much as universal joints so they don't get bound up and make it soooooo easy to get onto hard to reach bolts. Biggest unexpected game changer tool I've probably ever gotten.

[@matthewclark2627]

A Knipex Pliers Wrench is a great tool as well. They are like an adjustable wrench combined with slip groove/channel lock. Countless uses and they don’t damage the workpiece like channel locks could

[@NNFaNRacing]

You forgot an obd 2 reader, Really helpful with diagnostics and they have gotten cheap enough it's hard to justify driving to the auto parts store every time a check engine light comes on.

[@jonnnn4895]

Auto parts gives a really in-depth read that cheap ones don’t

[@bubbaslaughter]

@@jonnnn4895 meh not really I’ve been slanging parts for the zone almost 8 years and our scanners even the new updated ones that do abs , srs and all that jazz are very vague mostly due to the system used, basically 2-600$ paperweights that’s you’ll still either end up throwing parts at or ending up at a shop.

[@snafuequals]

@@jonnnn4895 you're crazy

[@jonnnn4895]

@@snafuequals u ever went to autozone ? I always go when my codes on it shows what part I need and what the code means for engine light codes would be nice if it read abs and etc

[@snafuequals]

@@jonnnn4895 😐

[@davidlindsey6514]

I'm starting to build out my Milwaukee power tools and after watching today's upload I referenced back to this video to see which options you recommend. Thank you for taking the time to do this!

[@scottyspeedshop9951]

I swear Taylor knows exactly what I want to know tools, welders, wheels absolutely love these videos keep it up big man👍🏻

[@connoro1600]

That is definitely a good use of my 40 minutes. Can we get a full on Toolbox tour/ tool collection video too?👍🏻👍🏻

[@spinner1294]

You basically just did get a tool collection vid

[@Yoshi-jy7nq]

Idiot he technically did

[@paulyoung4814]

Good presentation

[@MrZimmaframe]

@@Yoshi-jy7nq Well no not really at all because part of a tool "box" tour is seeing their layout, how they organize things and specialty tools.

[@jumbleman101]

Air hammer, chisel, a nice long sharp punch, air compressor plus a blowgun for sure, some type of scanner/code reader as well. Thanks for the video I enjoyed it and I can honestly tell you that your opinion on the KNIPEX and the stubby Milwaukee 3/8 impact is shared on 100% and is spot on both of those tools are my best investment I've ever made and most used tools.

[@QuinnSomeLoseSome]

As a bodyman it hurt my soul hearing that 1/4” isn’t important

[@stephngibson5517]

Quinn Michalec for real and he has no ball peen hammer that’s all I use

[@Ironsights85]

yeah that one stung! i work on everything from combines to mini bikes and i love my 1/4" sockets!

[@babybarber7916]

That was the only thing I could think about through this whole video

[@CKilger12]

YEAH...not just as a body person. The ratchet drive size really IMO depends on the kind of torque you are needing, not all 10mm bolt heads are the same. I snapped many a bolt head with 3/8 that 1/4 probably would not have. Just sayin

[@automedic9781]

Even as a service guy and not a body guy I thought that was weird 1/4 isn’t a “luxury” it’s a necessity

[@OldBeaterGarage]

Nice to see another Mechanic who's go to is 3/8"! I see so many of these KZbin guys saying their 1/4" is the go to. The recommended GW 84t is definitely a great budget 3/8 ratchet and was my go to for several years, for most of us the 3/8" ratchet is the tool we'll have in our hand more than any other and if you can afford it ponying up the extra $$ for one of the truck brands is totally worth it if you're doing a lot of wrenching. My personal preference on impacts has always been air, since with a little oil they last a LONG time; batteries are expensive and don't last decades, but as time goes on I'm slowing going towards the battery stuff.

[@skateadicts]

Dude this is the work of the lord. I wish there was video like this years ago when I first got into cars and working on cars. You nailed it with the list and what is and ins't as important. Keep it up!

[@mturawa]

From my limited experience working on my own cars, the tools that you need are the ones that you don't have. If you are crafty and creative, you can get away on smaller jobs using what you have. There's always a way to get the job done! Thank you for the comprehensive list and advice.

[@pillowbugg]

Yep, get creative. Make a solution with what you have to work with. Excellent point.

[@makojuicedaniel9307]

"there's always a way to get the job done" But not done right, get the right tools even if it is the cheapo version.

[@ec6052]

@@makojuicedaniel9307 Good little sheep!

[@escapetherace1943]

@@ec6052 naw he's right, trying to repair a car with only a drill and a few sockets and a pair of pliers suck

[@ec6052]

@@escapetherace1943 What a wimp!

[@tbonelittlet]

A jack and stands is a must !! :P

[@spm1209]

Came here tonsay this.

[@ChromeCowboyGaming]

Hes got a lift so that's not a must for him :/

[@FSGAMER35]

ShortGeared or a piece of log

[@kllgrogto5838]

@@ChromeCowboyGaming but we are not talking just about him, most people watching this video are not going to have a lift so jack stands and a jack are a must have

[@Barrage_Xr6t]

Should be one of the first things on the list

[@garywain4011]

Taylor Ray. A most wonderful video, for which I offer many thanks. As an Englishman who's odometer has just hit 50 i'm looking to start wrenching on my 30 year old Land-rover Defender, and my relatively young (15 year old) 2006 BMW 335i N54 e92. As a younger and much poorer man back in the 90s i had to do much of my own maintenance on some very dodgy cars, and I have kept my tools safe should I ever need them. Since then I've had some male relatives pass away who have placed their tools in my care (I am merely their guardian). What's delightful to see is that apart from a few cordless impact wrenches I have pretty much all that is required, and a few more besides. Keep up the good work my good man, and more strength to your elbow.

[@briand2195]

A couple of notable mentions in my experience, Pass-thru sockets. While not a requirement they come in handy say when you have a long alternator bracket bolt you're trying to remove close to a fender well, in occasions like that I prefer them to ratcheting box wrenches. Since you mentioned crank removal, I'd mention chain wrenches for holding the crankshaft when you go to reinstall the crank bolt, I used to ratchet strap the crank arms to the sub frame to hold them before discovering that method.

[@Irond3vil2]

This is a really good set. I'd add plastic trim tools and clip remover. dirt cheap and very useful

[@DaltonBalkwill]

Anyone still coming back to this to buy tools 😂 I know I am

[@patrickthomas3859]

yes

[@josh5758]

Same

[@archoplites]

Yup.

[@Daniel-Wendorf0216]

i just added all to an amazon list. i just buy em as i need them

[@tomstandish106]

100% agree with the ratcheting wrenches. They make things so much easier and faster then the normal wrenches. Could be done without, but after using them would never go back!

[@trd8749]

When you're talking about screwdrivers, and mentions Japanese ones fitting better, many people forget that Phillips is different to JIS. They look similar and many people think they're the same but they aren't. This could be what you're talking about.

[@John-ds9ih]

Yeah JIS is real working on Yamaha bikes.

[@LordOfSilense]

Doesn't make sense to talk about it though since all screwdrivers you buy nowadays are JIS screwdrivers, since the ISO standard for screwdrivers is the same one as JIS. The issue is when you buy screwdrivers that aren't made to modern spec, in which cause you're buying old outdated Phillips

[@stevecallachor]

Philips screw drivers are designed to slip. Use Pozidrive it's designed to hold on!!! Stavros

[@JARCAICO]

This is by far the most comprehensive and informative video out there in the internet world that is dead right on. It’s excellent and I’ve seen it several times it’s so good. I like the fact that Taylor seems so humble also. Thank you taking the time to create it and share it. God bless.

[@IntentionallyLeftBlank.]

Harbor Freight would be like "yo get everything in that table for $49.99!!!!"

[@SnD340]

That's one hell of a deal lmao

[@curtisreitmeier1599]

Yeeeeeessssss! Yes! Yes!

[@lucasromero9377]

Harbor freight has 2 people lovers and haters Im a lover.

[@swide2750]

theyre going out of business all their stuff is 50% of

[@mercury0214]

@@swide2750 lol no they arent

[@trophbrwntrouthunter]

Man I have been watching you for years and literally just notice I wasn’t subbed, man I’m glad I saw that. I appreciate all the time you put into teaching and demonstrating, not skipping over the details for flash! Thanks man.

[@mickeyyy7571]

I recently bought a headlamp after holding it off simply because i was thinking it was overkill and i wasnt going to need it or use it often but mannnn i was wrong! One of my most favorite purchases! Can work on my car(s) outside at night if i want to with little to no issues

[@dan5087]

I've had my Harbor Freight angle grinder for about 8yrs now (moderate use) and it still works great! Got it super cheap, and always said I'd eventually "upgrade" but never had the need too. Great video man!

[@Duke_of_Prunes]

Me as well -- use it mostly to cut out old black iron plumbing pipe.

[@seancook7224]

Haven’t seen it listed anywhere else yet but when I built my first tool set for working on cars I included a C-clamp for doing brakes. Yeah, a lot of the disc brake spreaders are same price any more but c-clamp can do more than just those spreaders as this past year I used one to put bushings into a control arm as I re-did suspension and not all control arms you could buy new but you could find the bushings

[@sawgrassbrothers]

Same I haven't upgraded mine for that very reason it's multi purpose and it's just what I'm used to for brakes now

[@PhillipRhodes]

A handful of C clamps in different sizes come in handy for all sorts of things too. Definitely a nice thing to have. And they're not terribly expensive either, as long as you don't go out of you way to seek out the expensive ones.

[@thunderbirdizations]

3:52 Do you still stand by this Taylor? Got a socket set for Christmas, Stanley black chrome. Will I have problems using an impact on them?

[@rusty1187]

More tips: i no longer buy "composit" ratchets (ones wth rubber handles) as the grease and oil will eventually disolve the handles. On the swivel adapters, i wrap a few turns of electrical tape around the swivel part to help limit the amount of bend. On screwdrivers: if you have a phillips with a sharp point, grind the tip down a millimeter or two. this lets the head seat down inside the screw slots alot better, and the screwdriver will last alot longer. On pry bars, if you can afford it, buy the ones that have the hammering plate built in to the end!

[@IIGeminiGemII]

Very much appreciate you posting this. Recently took a PT position at an auto parts dealer to learn more about vehicles, their components, etc. I knew a lot of this, but most ppl expect me to IMMEDIATELY know EVERYTHING about EVERYTHING... (To be more accurate - They assume I'm equipped with a CRYSTAL BALL 😆) Thank you!

[@HabaneroTi]

I've found that a right angle die grinder and rotary tool are extremely useful for restoration work, if there's a lot of rust and old paint and crud to remove prior to treatment and painting. They're more maneuverable than an angle grinder and come in decent cordless versions. Mine are the Milwaukee M12 and I really like them. And like many I prefer the non-Fuel brushed M12 ratchet, because it's the least expensive and has the smallest head to get into tight spots easier. Also, if you're working on transmissions then you'll probably need lock ring pliers, which are like snap ring pliers but with flat tips for snap rings with flat tips instead of holes. And yeah, the M12 3/8" stubby impact wrench is great. Second favorite tool after the die grinder. I also think that locking adjustable pliers are handy, kind of like an adjustable crescent wrench but with a vice grip-like locking mechanism. Useful for tie rods and whenever you need two wrenches. And personally, I'd never use non-impact sockets with an impact tool. They'll usually work but you really don't want to risk that one time when they break and throw shrapnel everywhere.

[@Alanthe918mobilemechanic]

If u wanna be exact wobble sockets and universal joint are different uses but u can put tape on the joint of a u universal joint and it won’t wobble as crazy

[@PhillipRhodes]

A few other things to consider (probably mostly in the "nice to have" or "infrequently used" category though) Specialty sockets - O2 sensor socket set, sparkplug socket set, etc. External drive ratchet & socket set for working on really long fasteners Belt tensioner tool or just a ginormous 1/2" drive breaker bar and the corresponding socket (mine is a 16mm) OBD2 scanner Flare nut wrenches A set of extra thin wrenches (sometimes referred to as "tappet wrenches") A set of offset double box-end wrenches A set of stubby wrenches (ratcheting or non) A stubby flex-head 3/8" drive ratchet A nice long 3/8" drive breaker bar Tubing cutter, and tube flaring tool Battery tester A bolt extractor set with "ez out" type extractors and left-hand twist drill bits A tap and die set A set of thread repair inserts --- And if you like working on "classic" (eg "old") cars: A timing light A set of feeler gauges A set of "ignition wrenches"

[@DroManJo]

Fr

[@PamelaHarper-l6b]

Taylor Ray, I am very grateful & thankful for taking the time to go over the tools!!!

[@brianriggin4560]

PLEASE PLEASE PLEASE...new guys/girls don't show up to your new mechanics job with a claw hammer. It's called a carpenters hammer. You're not doing carpenter work. Better off buying a larger heavy 32oz ballpein hammer. Plus, someone won't cut the claw off your claw hammer when they see laying around unattended. Usually, it's the old grumpy mechanic that sees it.

[@christopherowens9580]

😂Thats why you are supposed to bark at those grumpy bastards till they leave your shit alone🫡

[@1utube01]

Sounds like workers are like middle schoolers at mechanic shops....

[@draco2202]

I disagree I have a “demolition hammer”(20-32oz with straight loner than normal claws) I cut off one of the tines and ground the other one more to a point to use a hammer/pick/prybar tool

[@draco2202]

Also if I left my hammer lying around and someone cut something off of it or any tool of mine for that matter I’d find out who it was and return the favor as a welder there may or may not have been someone who liked to mess with others peoples tools who got the doors of his truck welded shut while he was working I the shop

[@michaeldesjardin4241]

​@1utube01 yes😂 your assesment us correct

[@Landrar]

Honestly, I'd put a pneumatic hammer on the nice to have list. Not a necessity, but can absolutely be a god send.

[@nickolascunningham8039]

I totally agree on the knipex cobra pliers, best $35 I’ve ever spent and another thing I would definitely get is something called a mechanical finger. Little grabby thingy that can grab ahold of any bolt of lost screw if it falls into a hole where your hand can’t reach!

[@sweetkiller9696]

Don't forget these small mirrors on a telescopic stock

[@firebird77clonefirebird89]

I scooped up a set of SK spanners (combination wrenches) for about 60% off on a Christmas sale, love them. My most used wrenches are the gearwrench flex heads. Tecton makes some excellent price value pliers. PROTO makes snap ring pliers which convert from inside to outside with the push of a button, wonderful!

[@DragonBuilds]

You can get into building stuff using wood and metal with a good workbench with vise, tool storage, lots of mechanic's tools (sockets and stuff), hand tools, power tools and accessories for around $1,000. Yet to my friends "that's a waste of money" yet they spend $1500 on an iPhone that lasts 3 years and then is garbage.

[@meltdownblitz]

Thank you so much for this video. I'm somewhat of a new mechanic with my own cars. I had almost all of this in some form but I added a few things to my list and learned a lot. Thank you!

[@matril01]

I watched a bunch of these videos before buying my tools and I have to say, yours was the best...I basically ordered 90% of what you recommend. I’m now wanting to build out and outfit my garage at the house. I would love to see a similar video to this one that covers what I would need/ want in my garage (i.e jack, jack stands, creeper, etc). Thx!

[@melvinboateng190]

How’s it going

[@nesbygalvan2088]

^

[@maxscriptguru]

Just buy it when you need it

[@ibrahimeltony4865]

Very very useful reference 👍 Adding to the list. -Tie rods extractors. -long pipe to add it pry bars if you need more leverage. -Magnets. Short, long for dropped bolts and holding bolts. - Mirror. Small one with some extension. - oil filter removal tool. Of course a funnel and oil catcher for oil change. - brake piston expander. Sometimes it stuck and need working on them. - Some lubricants, silicone, moly and lithium and so.

[@69sound81]

For the brake calipers, I use locking grips and a piece of metal after using a prybar to iniciate separation. Has never failed on me. Magnets are a must, I've never needed a mirror. Oil filter revomal tool is not always needed, but nice to have once you start really working on cars as a techitian. lubricants are miscelaneous so they don't count in the tool list. the pipe you could count as a tool accesory, but so cheap and available I wouldn't bother. But someone said tap and die set and that I can say is a must, also a scanner/code extractor, jack, stands, ramps, personal protection gear, compresion gauge and fuel line pressure gauge. Those I would add to the list as a must

[@fireerik]

“Don’t really need the smaller pry bars you can use a screwdriver” as the smallest prybar is the dirtiest one of the set

[@jonnnn4895]

@@fartsoundeffect5013 he’s saying that he uses it a lot derp 🤦🏽‍♂️

[@thebridge5483]

Don’t use screw drivers as pry bar

[@JShear3050]

Learning what I needed the hard way. Here's some essential things I think will help out other diy'ers Jack to get the car off the ground. Jack stands Brake caliper compression tool (you could just rent one from a parts store but they are pretty cheap on Amazon $20-$30 so if you do brakes alot it could be worth the investment) Tire inflator (you can get em real cheap and ive been saved alot by keeping this in my car as well as saved others a tow bill) Jumper cables or if you want a jumpstarter.

[@synago_scribe]

Hey man, this is probably one of the most important videos I have watched on youtube. It's an awesome video and has really helped me make a lot of choices when it come to buying tools. Thanks for taking the time to do this. Also, an updated version down the line if any new tools or changes are made!

[@kermitefrog64]

I purchased the Hercules Grinder from Harbor Freight and it did an excellent job cleaning up the rust out of my 1964 Ford F250 and prepared the bed for a paint on bed liner.

[@junior3815]

I've been on the fence on picking up the Stubby impact, so thanks for this. Gonna be grabbing that realllll soon.

[@mikenormandy9250]

Knipex pliers wrench. Replaces any adjustable/Crescent Wrench - or just take an old pair of Channels and grind the teeth flat. Comes in great service when you need it!

[@spazda_mx5]

Great vid! And I'd say a cheap-ish tap and die set can be pretty useful to have as well.

[@guitarwizzz]

I would agree but opt for the mid to high end taps, or just the most expensive you can afford. Much less likely to break.

[@binagarten4667]

Lovely video. When I was a young enthusiat and unleaded ruled I bought a set of £2.99 spanners, one in Metric and the other imperial. I was gifted a Kamasa Socket set by my sister with a jack and stands. I used to service cars with these when cars were simple. However I then went into high end tools, like Ingersol Rand and Rippoff. Then I found I was too old and cars too compliacted needing scan tools and ramps, with undertrays and I have called it a day now. But lovely to see your take on the tools.

[@rei39]

Very informative video Taylor! I feel like I already have more than half of these exact tools just from watching your videos for a while. 3/8 stubby impact for the win. If anyone needs an impact, get that one.

[@simonfozzy8061]

I second this.

[@birddog3130]

I can't believe after 50 years, as a do it yourself, (shade tree mechanic,) i know so little about tools, that weren't around when i was younger. Amazing. @9:00 I brought 2years ago high-tech adjustable wrench from Walmart,(one up on you)

[@josephflores9705]

My college is trying to get students to buy all snap on. We get half off but the price for the set still at 3000. Im not going to be stupid

[@frank_texas7400]

Good for you but as a rule if you break the same tool 2 times upgrade to the next tier and you will be fine

[@caffeinatedbean8281]

My college said the same, my harbor freight sockets work well🤷

[@javi5377]

I would buy 2 sets and flip the tools

[@BoostyGeoff]

Buy two sets, sell one at just below full price and you pretty much have a free set of snapon tools with lifetime warranty.

[@aj_idgaf31]

I agree but if you like quality reliability and life time warranty no questions asked definitely get some things from snap on with that student discount no brand has better ratchets so get snap on like the locking soft handle and no brand has better sockets when it comes to specs so any flank drive sockets set and universal sockets and vice grips or locking pliers I’ve never had them fail while other brands have trust me now wrenches don’t go snap on there just over price and everything else I don’t tell you to buy I wish someone told me these things before I got outta school

[@kwhegemeyer1239]

Ace hardware on sale section for the Allen wrenches full metric and standard set that fold together super tight fit easy to pull out $5.99 had me the best set of Allen’s I’ve ever gotten never had 1 round and easy to keep up with if you just put one back when you get another

[@carsonclonan228]

This is awesome. Thanks Taylor. The complete list in the description is so helpful.

[@Amokof]

As a newbie DIYer, this video was incredibly informative!

[@Mastergeytion]

Literally anyone that has ever worked on a vehicle, cannot disagree

[@rickyburch6713]

He keeps mentioning metric sizes where is the sae sizes.

[@jonnnn4895]

@@rickyburch6713 when are sae used ?😬

[@rickyburch6713]

My Lincoln is sae, several cars around town are also.

[@mythicalducky]

@@rickyburch6713 sae is irrelevant if you work on modern cars i have both but rarely use something that isn't metric

[@rickyburch6713]

That's not true if you find a nice classic to buy.

[@sidneyeaston6927]

You should get a set of easy outs and a set of twist sockets for rounded nuts and broken bolts. fix them up to work in a small impact wrench then you will not snap the easy outs by putting torque to them.

[@bobgnarly1985]

Great video man. I’m in the same boat as you kind of, was a mechanic for years then went to the military while building cars on the side now I’m getting back into cars as a job and want to go back with a stocked box. Thanks for the tips, always good to hear what someone else uses and why!!

[@schmalzilla1985]

I once had a ball joint go out on me. Didn't have any money for all of the tools, let alone to take it in. I did have an old endmill that fit into my cordless drill. Not fun. It did the job, but oh my god did it take forever until I took enough material out that I could beat it the rest of the way out with my hammer and punch. I learned a valuable lesson that day. The right tool makes things so much easier. And preventing the problem makes your life so much easier.

[@lukevanderburg2133]

Was on the hunt for the perfect adjustable wrench too. Found the knipex pliers wrench. Doing alignments is super nice with them!

[@keatonmenefee9115]

Carlyle adjustable wrench from Napa is the best one I have found better than the snapon ones or mack ones that my buddies have

[@WyattHabel-f8n]

Got that right. The 7 and 10 inch pliers wrench almost completely replaced my wrench drawer.

[@nicksrandomviews1296]

I really appreciate your videos in a huge way my friend. The videos you make are a service to the people that is so very valuable and just wanted you to know that I think you are phenomenal guy and I greatly appreciate you.

[@Bfragrance]

Dude didn’t even realize it was 40 min but was so focused and entertaining the whole time . Awesome video 👍🏻

[@edwinacevedo8420]

This has to be the most thorough and practical advice I’ve gotten. Thank you so much.

[@joelbravo2690]

It felt like a little kid showing me his toys. Now i know how my friends look at me when i buy a new power tool😂

[@sertimins]

1/4 ratchet is a must for such as taking off covers, installing water pump. Jobs that needs light pressure.

[@Lynyrd4Skynyrd]

Magnet ... thats for damn sure haha

[@FredricMccubrey]

drop so many 10mm that have be saved by a magnet

[@rikkarokassa]

@@FredricMccubrey Maybe that's just meme but I don't think I have newer dropped sockets somewhere tight. They are secured on the ratchet. But nuts and bolts...

[@rikkarokassa]

And good size rechargeable magnet light is also awesome

[@chodickson]

Very comprehensive- nail on the head for your listed tools! Missed? OBD2 reader. Good jack and jack stands. A cheap MIG welder- I fear NO broken bolts having that. A small propane torch - heat that stubborn bolt to get it off. - Air compressor. Doesn't need to be a big one, just a small one, having shop air just to pump up or blow air is so handy.

[@mx5milton]

Do you have a discount code or something to use with milwaukee tools, been tempted to upgrade my impact set

[@CluckYou21]

Huge sale on Tuesday!

[@Danielxperez14]

This video has so much value! I appreciate you dropping links for the majority of the items

[@hondacota4rt]

Two talking hands on a steel table and a lot of tools. Got some serious TOT vibes. 👌

[@jacksonbell5048]

so true

[@Novaah803]

4:40, even if you do have an impact you usually end up needing a breaker bar, I like to use a large steel pipe or jack handle. I’ve had axle nuts my electric impact can’t remove, but a breaker bar always will for me.

[@Van_wints]

Love you Taylor. my goal for 5 more years is to be where your at now. Just turbo k series instead of LS. Maybe at least 1 Doritos boy for fun to build. Thanks for everything you do. I'd offer to help on your team when you go pro am or pro 2. Get my travel cost and sleeping arrangement and no need to pay me for time at the track.

[@Van_wints]

@@av23gm-2g2bdv2-k yoooooo

[@mitchellk1675]

Curt VanWinter life is good

[@mongstyt9946]

Its been 4 years, how's it going

[@DylanLeDul-b4f]

Thank you so much i used this video to see what tools i would need for work and this significantly helped my collage work

[@mtschoenrock]

This is probably my favorite video man, I've always been curious about what tools you use the most. I'll be keeping an eye out for some of these tools that are missing in my collection

[@peterdarlington4117]

A couple things as a HVAC contractor I use unibits everyday and the cheap ones from harbor freight or Amazon are trash compared to a Klein or Milwaukee so if you plan on drilling a lot of holes with it spend the money on a good one! Also I have pretty much all the Milwaukee cordless impact wrenches and ratchets they are nice but I stock my service trucks with Ridgid cordless tools if you register them they have a lifetime warranty on the tools and batteries! And the 1/2” and 3/8” impacts have plenty of power and when you consider a 12 amp hour battery is 250 bucks it’s nice to only have to buy them once.

[@redturbofox9480]

You should teach cleetus how to weld 😂

[@joshuamiller4681]

I thought the same thing watching cleetus ‘s video today. Or he should let Taylor come and do his fab work for him. I think it would make another good collab video.

[@reecewoodruff3255]

James can weld pretty well, cleetus just likes learning new stuff. Hence why he tunes a lot now even though he has a great LS tuner in his shop

[@FreddyFunderbunz]

How's that plasma cutter treating u? Thinking about getting one.

[@rallias1]

Cleetus knows how to weld as much as can be taught, what he needs is practice.

[@t0munist]

Been coming back to this vid for a long time now slowly building my collection. Appreciate the content man 🤝

[@Thecwarter]

You said you were looking for a good crescent wrench, or "adjustable wrench." I recommend the Proto brand wrenches. They are the cat's meow when it comes to crescent wrenches. I haven't found one that even compares.

[@rickyparrish2570]

The snap on adjusables are extremely nice as well.

[@QuickQuips]

Another option are Knipex Cobras and Pliers Wrench. Those are amazing and even can do a ratcheting action.

[@mikeray1544]

Howdy Mr.Ray...lol. I just re-placed my core tool inventory, former auto/truck tech currently doing commercial farm equip /trucks/vans. Did my first tech school back in 89', and if my Dad Mike Ray taught me a lot also- cool report Taylor...old Navy guy checking in...

[@Fekillix]

8:20 a nice Knipex Cobra can replace that, and the wrench can be replaced by a Knipex pliers wrench

[@QuickQuips]

Yes. A fellow man of culture. He seems to have a cobra at least.

[@Duke_of_Prunes]

I don't see a 4-foot long section of pipe to add to your breaker bar -- commonly used to break bolts and damage sockets.

[@FranklinSonatra]

I've broken many of the cheapo harbor freight ratchets that come in a kit. My advice is to spend the $10 on the pro series black ratchets they have

[@NicholasFussell]

I've always started off with the cheap tools, if they break you know you need to upgrade!

[@1012Mrjesse]

just buy there new Icon tools, they're pretty good quality too

[@HaydenZ06]

sNiiPeZ_03 Ahh icon. Chinese tools for American money

[@ayp1938]

@@1012Mrjesse i would put harbor freights pittsburgh pro against icon any day icon is just not worth the money

[@KC-lg7tx]

@@NicholasFussell the black Pittsburg pro is no joke. I have had a 3 foot pipe on one and started bending the handle before I stopped lol. Didn't skip a tooth. If I had kept going it may have but I was probably nearing the 200 ftlbs area Didn't have a 1/2 inch in that situation

[@UltimatumAutomotive]

Harbor freight has a wood handle 4 pound sledge with a longer handle then that one for 9$. Had mine for 3 months and use it daily in the shop on suspension work. Absolutely love it.

[@yuno3364]

"This guy isn't a mechanic..." *Sees the wobble adapter with electrical tape around it* "Yep he's a mechanic!"

[@MrFrambooise]

why tape?

[@zipedadoo]

@@MrFrambooise You put tape on it so it doesn't flop around while you're trying put the socket on the bolt. Especially useful if you're using an extension. The tape holds it in place but still allows it to flex. I do use this trick often. I even thought of it myself about 25 years ago. Thought I was unique but the internet has proven otherwise.....

[@pilotboard2]

I had the exact same thought hahaha

[@-wm--]

I use orings, you don't get the tape residue goo

[@davet.5493]

@@-wm-- Duude o-rings. F--K learned something at 50! thanks

[@jrxlife]

My dad has recently bought be a Milwaukee m18 stubby impact kit as a gift, it is absolutely amazing and I understand why most your power tools are Milwaukee. However, I'm 19 and it breaks my heart that I cannot afford to buy any other tool bodies to expand my new arsenal let alone batteries lol. Ps, since you've had your channel I think you are one of the best car guys on KZbin, keep up the awesome work bro!

[@Gusmanbro]

"a 40 minute Taylor video?" "Yes"

[@lParohlx]

Gusmanbro blind? Yes!

[@samcampbell8845]

I’ve tore apart my whole car with a 200 piece craftsman kit and put it back together with it too. You don’t NEED these but man do they help

[@nate7046]

8:41 I would highly recommend the knipex pliers wrench I was looking for a better adjustable wrench to and they are by far my favorite ones they work a bit differently but in the end i feel they get the job done better.

[@JohnBlack-dv8ss]

Yeah knipex make some quality hand tools, ive only ever gotten one thats actually worked as one would expect, ita a bahco black steel shifter. I guard it with my life, very rare. LOL.

[@evelynalvarez8963]

Thanks! I’m using this video to educate myself on tool names for an apprentice position for mechanics tomorrow

[@jobehoffmeister7122]

Great video, thank you. I literally have most of the tools that you had shown. I've slowly been collecting over the years, and some I had to go and purchase in the middle of a project. Now I have a list of items I will need to have for just in case. There is nothing more frustrating to me than stopping in the middle of a project wishing I had a different tool. I would like to give a shout out to Radio Shack's soldering iron kit. I've had the same soldering iron kit since I was 16 years old, I am now 41. I still use that bad boy when doing head units, speakers, and stuff.

[@ViperliciousOG]

Do they make them like they used to :c actually since the world started the big sick, do they make anything anymore? 😋

[@DragonBuilds]

I don't work on cars, but I use many of these tools (adjustable wrenches, screwdrivers, sockets) to work on machines. A pass-through socket set is very useful, as are a pair of channel locks. Also, don't forget to buy a chest for all the tools, and a sturdy workbench with a vise (Yost forged is a good mid-range option that is still very strong, Wilton Bullet if you are too rich).

[@carlhannusch3929]

AvE could give you some tips on how to engage the voice-activated auto-focus feature on your camera

[@SayntStorm]

Focus you fuck!

[@IMKINDOFABIGDEAL13]

@@SayntStorm I was coming to say it but glad you got it covered

[@sethdoane5295]

FOCUS YOOUUU FUCK