Introduction to the GoPress and Foil Machine

[@lindairvine50]

Best video, finally a person that takes a breath between sentences.

[@berylfisher6741]

The Best demonstrator I have ever seen.

[@brendadainton7497]

I have found your tutorial the best one to watch so far. You explain everything clearly and it’s easy to understand. Thank you.

[@joycecrihfield7488]

Can you use Heidi swaps foil with the go press machine

[@brendadainton7497]

@@joycecrihfield7488 ...I’m not sure who your question was meant for...but I think you could.

[@pinkpinsofpain]

@@joycecrihfield7488 No Heidi Swapp's foil is to be used with laminators or the Heidi Swapp MINC machine.

[@ownsacat]

This is the best instruction for this Go Press and Foil machine that I have seen. Thank you.

[@CoutureCreations]

Thanks June

[@susanna1207]

Thank you for all this stunning ideas 😊

[@mariagil1332]

Thank you so much!!! By far your video is my favorite ❤your tips make it look easy to use my machine

[@alanalendvay6131]

thanks so much. I purchased this machine last year, never used it. tried today, but wasn't too successful. Hopefully after watching this video and a little practice i'll get better at it.

[@kimberlyjones6476]

Wow, with all these ways of doing this, this is a very versatile machine. Looks like I have something else to buy.

[@pattyfromherz9965]

Thank you really like your tutorial, and it was easy to understand.

[@Renelephant]

I could listen to her ALL DAY! VERY SOOTHING and GREAT! except, I just haven't been able to see the finished or result of the 3 I've seen, so far! EVEN WHEN SCREEN AT FULL SCREEN SIZE. Happens often!!

[@CoutureCreations]

Hi, This has been noted for future videos. Thanks

[@artycraftyalchemy]

Just ordered mine. Hadn't even seen this video yet and now I have I'm even more excited!! 😀

[@CoutureCreations]

Hope you have been having fun with your new toy.

[@digarling2451]

Such an amazing piece of equipment. TFS. 😄

[@judijones6504]

Hi, I liked your tutorial but just for future help, can you please show completed items up close. I couldnt see quite a few of them as the camera didnt zoom in enough. You gave some great ideas for me to try though. Thankyou. :)

[@CoutureCreations]

Hi Judi,Will remember that for next time. We do have plenty of close up example photos on our blog and facebook page.

[@sarahwalsh1640]

This machine looks amazing. Looking forward to details of when it will be in the UK x

[@CraftStashcoukTV]

Hi Sarah, It will be on sale at www.craftstash.co.uk towards the end of March/early April. If you sign up to our mailing list you'll be the first to hear about it! Jenny :)

[@BibiCameron]

I love this. Thanks for innovating !!! Would be great if this can be used with all the embossing machines

[@CoutureCreations]

Hi Bibi You can use many of the popular embossing machines on the market today, as long as they are wide enough to accept our heating platform

[@sabrinabradley5010]

Thank you I enjoy your presentation. Looking forward to be an owner of one of these GoPress & Foil. Worth saving for! Thanks again for the preview.

[@StarLitStudio]

This is excellent - informative and helpful!

[@CoutureCreations]

Thanks Cindy

[@erinbailey5444]

Thanks for this Video,I did not realize how much this machine could do. So happy I won one.

[@CoutureCreations]

It is a wonderful machine. It is great to see how well it is being received by everyone.

[@dibrown3996]

Wonderful tool, will be looking out for it.

[@Cre8tiveConnexionsbyLillia]

I never knew how much this machine could do. I only ever used mine to foil sentiments on parchment. Rescued my machine from pile of unused items about to be donated to schol art dept. Can you tell me which products are available now to use with the machine, which ink do you recommend, and do the Betterpress plates work in it ? I was delighted to find this foiling machine is actually a letterpress too ! So glad that I did not give away my Big shot pro, as I have both gemini and an Xtool M1. Do you know which die cutter is the easiest to roll the platform through as I really struggle with big shot now? The lack of affordable plates sold locally put this machine into retirement, but so glad I did not ditch it and buy the two separate Speelbinder ones. I imagine a lot of people must regret not keeping theirs.

[@Cre8tiveConnexionsbyLillia]

I have discovered a couple of go power cut and emboss machines on marketplace and hoping to convince a seller to post instead of collect as I am housebound. Can you please confirm that i can use this go press and foil in the electric machine ? Unfortunately your machines are like goldust in UK, no new ones available in shops.

[@joycecrihfield7488]

Can you use Heidi swap foil with the go pess

[@CoutureCreations]

Hi Joyce, Sorry no as the Heidi Swap foil is toner activated. The GoPress & Foil Machine works with heat activated foil. Happy Crafting.

[@kilnkardz7366]

Can you get replacement lids

[@CoutureCreations]

Hi Kiln, Yes replacement lids are available to purchase separately - CO725817 - GoPress & Foil Stamp Press Cover.

[@cheryldiener8658]

Please can you let me know more about the quilting plates and how it works?

[@CoutureCreations]

Hi Cheryl, Can you please contact us via email at [e-mail] Thanks

[@cheryldiener8658]

@@CoutureCreations I live in South Africa. Who do I contact here? Thank you

[@CoutureCreations]

Hi Cheryl, Can you please contact us via email at [e-mail] Thanks

[@jeanannmoale7295]

Thx for a very informative video. Wish you would have done close up of all samples.

[@CoutureCreations]

Hi Jean, Will remember that for next time. We do have plenty of close up example photos on our blog and facebook page.

[@CathQuillScrap]

oooo this looks awfully useful. Going on my wishlist.

[@GettinBye1]

Does the Couture Creations foil ONLY work with the Go Press machine?

[@CoutureCreations]

Hi Tracie, Our heat activated foil is suitable for most foiling system. It is not suitable for a laminator with toner activated products.

[@GettinBye1]

@@CoutureCreations so how do you use it without that particular system?

[@suesieroto459]

can you tell me if it will go through the Gemini die cutter please

[@CoutureCreations]

Hi Sue! We haven't tested it with the Gemini, so it may be best to see if you can take your machine into a local store once the GoPress and Foil is in stock and test first. The GoPress and Foil Heating Platform does fit through similar machines.

[@susydan]

Artdeco Creations Brands I would say the Gemini mouth is not deep enough as it uses thin plates.

[@barbaramanning3918]

can i use the Anna Griffin Empress as my cutting machine with the GoPress

[@Lemontop1000]

I have ordered mine but I would like to know more about foils and dies, and as Sheila asked - can we use other brands of foil as I have several foiling machines and they all use one type of foil...

[@CoutureCreations]

Hi Lemontop! Other heat activated foils should work, may just need to experiment a little with timing and pressure to get the same results

[@Lemontop1000]

Thank you x

[@jennymcadoo1503]

I enjoyed watching the different techniques but could not see the finished products, need to zoom in please

[@candacekieper4354]

appears you could use as stamp positioner as well

[@anitaenright6054]

definitely works as a stamp positioner :)

[@peggyedwards8850]

What a great tutor

[@cherriebridgens8802]

Hi. It doesnt matter how strictly I follow you video, my items never came out the same as yours. Is it possable that it could have something to fo the the rollers on my Ig Shot. Does the surface of the card stock have anything to do with this. The card stock that I use is smooth on one side which I use for the inside of the card for writting the message. The other side is a bit textured. I'e also tried some of you other teqnues and dambed if I get them as need as yours. Please help Thanks Cherrie

[@CoutureCreations]

Hi Cherrie, Thank you for contacting us. Yes there are variables which will effect your end result. Cardstock thickness and quality as well as height of your die cutting machine opening. Please email us at [e-mail] where we can then contact you over the phone with more solutions which may be suited to your problems. Thanks

[@barbaramanning3918]

what machine are you useing to run the gopress through

[@georgiewilkinson9436]

How do you measure & ensure accurate placement of the foiled image ? None of the examples seemed to be concerned with this as you can't actually see where it's going to foil ......... looks like fun though !

[@CoutureCreations]

Hi Georgina, there are grid lines on the bottom part of the platform that has grid lines on it to assist with centring and placement for your hotfoil stamps/dies etc.

[@annehanson4822]

Can i use the GoPress and foil machine with my big shot?

[@CoutureCreations]

Hi Ann, Yes you can use your Big Shot with the Go Press & Foil machine. You may need an extra shim or two on top of your closed foil platform when you run it through your big shot (pieces of thick cardstock). Happy Crafting.

[@annehanson4822]

Thanks so answering my question!

[@shirleyotero1846]

Can u use the foiling machine with any machine

[@CoutureCreations]

Hi Shirley, THe heating platform of the Go Press & Foil machine is approx 15cm wide and just over 2cm in height. What brand of die cutting machine do you have? Thanks

[@sheilablumentrath3492]

Can you use other brands of foil as well?

[@CoutureCreations]

Hi Sheila! Other heat activated foils should work, may just need to experiment a little with timing and pressure to get the same results

[@sharonvanderwesthuizen4330]

Luv this machine...must have. :) When will this machine be available in South Africa?

[@CoutureCreations]

Hi Sharon! Sorry for the Delay! For more information on availability in South Africa please contact your local distributor: www.thewholesaler.biz/

[@sharonvanderwesthuizen4330]

Hi. They only respond to emails from registered businesses, and not the public. :(

[@ashleybrown9467]

Can This foil be used as toner reactive foil? If I use it with a laser printed design and run it through a minc machine will it work?

[@CoutureCreations]

Hi Ashley, Our foil is heat activated not toner activated. If you use a toner activated product along with the toner activated foil you are then able to use the Go Press & Foil machine with the normal instructions to foil your product. Thanks

[@artycraftyalchemy]

If you use this foil with the minc the heat makes it stick everywhere... Embarrassingly I tried this with my first video with the minc. I have regrets haha. Wish I'd just got this one instead in think! Just ordered a go press and foil though so am super excited!

[@bobbiebbaumeister2566]

Has anyone else had a problem after using the go press and foil and cutting it out in the Gemini Jr now it does not cut out dies please let me no

[@CoutureCreations]

Hi Bobbie, Can you please contact us at [e-mail] please. Just need some more information to help you out. Thanks

[@petmomful2260]

I like this machine but if I can foil with just the roll of tape, why do I need the machine?

[@CoutureCreations]

Hi, There are hotfoil stamps (sentiments and images), cut, foil & emboss dies available to purchase which are heated up using the GoPress & Foil machine to enable the image to be foiled. Hope this helps.

[@jocelyncrosby815]

how do you replace the lid with the new gridded lid, would you make a video?

[@CoutureCreations]

Hi Jocelyn, This lid for the Go PRess 7 Foil clips on and off at the top. Would love to see your crafting project. Feel free to share them with us. Thanks

[@CoutureCreations]

Hi Jocelyn, This lid for the Go PRess 7 Foil clips on and off at the top. Would love to see your crafting project. Feel free to share them with us. Thanks

[@jocelyncrosby815]

you stated that the clear plate/lid is removable, but mine is not, I put the shim inside like you did and it has made impressions in that plate. Is it possible for me to get a new clear lid.

[@CoutureCreations]

Hi Jocelyn, The clear lid clips off at the top and they are also available to purchase separately. The lid of the Go PRess & Foil machine will mark, bend and warp overtime. Hope this helps.

[@cathieh.7225]

Would have been nice to see the end results up close!

[@priscillapather2429]

Can I use my big shot plus machine

[@CoutureCreations]

yes you can use your big shot machine to pass through the platform of the GoPress and Foil machine

[@trezzsc]

I just received a Go Press & Foil Machine for Christmas.....what is a "hot foil stamp"?...and where can I ge† a metal shim?

[@barbterry1499]

Check out Scrapbook Made Simple videos to see how they are using it.

[@lindaanderson7375]

Is the metal conversion plate used for the samr techniques as the metal shim, or are they different?

[@CoutureCreations]

Hi Linda! The conversion plate is thicker than the normal metal shim and is used mainly to add the correct thickness for the pressure required for the heating platform of the GoPress and Foil for this purpose.

[@lindaanderson7375]

@@CoutureCreations Do you have any videos showing it being used?

[@CoutureCreations]

Hi Linda, I have attached a video link here for you. Many thanks blog.couturecreations.com.au/joanne-hedges/foiled-steampunk-cards-with-joanne/

[@Cre8tiveConnexionsbyLillia]

​@@CoutureCreationsCan we buy them still in the UK ?

[@ruthscarborough7213]

I have a GoPress and Foil machine, but it didn't come with a metal shim. Where can I get one?

[@CoutureCreations]

Hi Ruth, There are two different metal shims available for separate purchase at our retailers. 1. Metal Conversion Plate (CO725818( is a thick metal plate used in con-junction with Cut, Foil & Emboss Dies or now renamed Cut & Create Dies. 2. Metal Shim - (CO725578) - This is a thinner metal shim that is used when foiling embossing folders and chipboard. Please let us know your location via email and we can then point you in the direction of a retailer. Happy Crafting

[@stevescarborough1718]

@@CoutureCreations Hi I live in Carthage MO. Thanks for your response.

[@CoutureCreations]

Hi Ruth, You could try Scrapbooking Made Simple. Thanks

[@lindataylor863]

I have ordered this machine but am curious as to why the corners of the foil need to be cut. Why? I have plans to use the used foil, but it would be better if the corners were preserved. Thanks!

[@anitaenright6054]

Hi Linda, cutting the corners just assists in ensuring a cleaner foil but I haven't had any real issues when I didn't cut the corner. You do not have to cut the corners and I do not always cut them, like you, I like to keep the excess and leftover for other projects.

[@lindataylor863]

Thank you, Anita! I'm expecting my GoPress Machine, dies and foils to arrive by the middle or late in Sept and I really look forward to playing with them. I was introduced to it through SMS (Scrapbooking Made Simple) and I'm so glad the wait for it to get through Customs and to SMS for delivery to me is about to end. I'll definitely be experimenting with making things from the used foils, just to see if not cutting the corners will cause any issues. Thanks again!

[@kathylarsson8388]

Wouldn't heating the plastic embossing folders eventually damage them? Great video by the way I just got the machine for my birthday yesterday. Thanks for your demo's.

[@CoutureCreations]

Hi Kathy, Great question, but there isn't enough heat produced to effect your embossing folder. Best of all you get some great results from your embossing folders. You may also like to try foiling onto heat proof acetate and poly presentation bags (just need a cardstock shim inside the bag). Thanks

[@susydan]

Are there instructions for when to use the metal plate.

[@CoutureCreations]

Hi Susan.... here is a link for you which will give you some instructions. www.couturecreations.com.au/gopress-foil-machine/ The metal shim is perfect to use when heat foiling wood veneers and chipboard. It generates more heat for you.

[@taraharris8931]

Will this work with the Big Shot?

[@CoutureCreations]

Hi Tara, Yes the Go Press & Foil machine will work with the Big Shot.

[@davjultrucking2107]

Why does my machine not heat up. Nothing changes when I press the button 😢

[@Cre8tiveConnexionsbyLillia]

Sorry I know question is old but someone else may have similar issue. My cable came loose. It was an easy fix as there is a panel with 4 screws you undo, then you can lift up the electrical chip panel thingumajig ( believe it or not I studied physics at school 😀), and you can push the wire back under it. Your panel may have been displaced, it is not the sturdiest and I think the suction clamping to the table causes more harm than good, but it is relatively easy to fix yourself.

[@trevanji]

I'm getting really confused: the foil machine directions booklet seemed so easy to start with. Then I watched this video and picked up at 7.18 the necessity for 2 metal plates. One only came with the Die Cut machine (and I don't remember it being mentioned for use with the Foil machine) but none with the Foil machine itself. I am either going to have to take notes for each procedure or run the risk of damaging that plastic cover. Help please :-).

[@CoutureCreations]

Hi Angie, Since the introduction of the Go Press & Foil Machine there have been many new ways to use this awesome little machine. There are two different metal shim that can be used with the Go Press & Foil Machine. 1. Metal Adapter Mat - CO725578 This is a fairly thin mat and is used when foiling chipboard or your embossing folder. 2. Metal Conversion Plate - CO726232. This is a very thick metal plate that is used in conjunction with the Cut, Foil & Emboss dies and the Go Press & Foil machine. The Metal Adapter Mat is the same thickness as a metal shim used in your die cutting machine ( I keep one just for my Go Press & Foil machine as the flatter the mat the better results). We have also released a cheat sheet for the sandwich setup of the Go Press & Foil machine which is available on our facebook page or contacting us via email [e-mail] Hope this helps. Enjoy your foiling!

[@CoutureCreations]

Hi Angie, Since the introduction of the Go Press & Foil Machine there have been many new ways to use this awesome little machine. There are two different metal shim that can be used with the Go Press & Foil Machine. 1. Metal Adapter Mat - CO725578 This is a fairly thin mat and is used when foiling chipboard or your embossing folder. 2. Metal Conversion Plate - CO726232. This is a very thick metal plate that is used in conjunction with the Cut, Foil & Emboss dies and the Go Press & Foil machine. The Metal Adapter Mat is the same thickness as a metal shim used in your die cutting machine ( I keep one just for my Go Press & Foil machine as the flatter the mat the better results). We have also released a cheat sheet for the sandwich setup of the Go Press & Foil machine which is available on our facebook page or contacting us via email [e-mail] Hope this helps. Enjoy your foiling!

[@trevanji]

Thanks so much! It will be helpful to see more info than the booklet that came with the Go Press (the cutting machine) as opposed to the foiling booklet. This is the beauty of the internet because if new or revised info is to hand, this is how it can get distributed.

[@WendysCraftDen]

Thank you so much for this video, I got mine last week and haven't really done much as I wasn't sure about things. You have made it very clear in this video. I did a little bit yesterday and have got foil on my plastic cover is there any way to clean it please. Hugs xx Wendy

[@CoutureCreations]

Thanks Margaret, Enjoy playing with your new toy.

[@gailgale2375]

You foiled chipboard. Can you foil cuts from our dies the same way, without using the sticky paper?

[@gailgale2375]

I ordered one from HSN but the metal shim does not come with it. Where can I get one Please?

[@susanunderhill2106]

I’m using the big. Shot machine with this and can’t get the right pressure with shims or Card stock. It’s not giving an equal coverage. It heats up as it should what am I doing wrong?

[@CoutureCreations]

Hi Susan. You will need to play with the shims. Maybe add an extra sheet of card as a shim etc. Are you plates more worn out in some areas?.

[@susanunderhill2106]

Couture Creations Thank you for your reply so quickly. It’s a new machine. I’ve tried many pieces of Card and wonder now if I have damaged the plate. How could I tell?

[@debbieeastel1399]

I am seriously thinking about getting this, my question is can it foil die cuts that have already been cut as ive got a scan n cut and got lots of sentiments that would look lovely foiled

[@CoutureCreations]

Hi Debbie, Yes you can foil die cuts but you will need a few positioned together on top on each other to create a little bit of height, and then foil normally as if it were chipboard. Thanks

[@bernicemeintjes]

Just curious, when you use existing cutting dies the way you show, does it not cut into the plastic lid ?

[@CoutureCreations]

Hi Bernice, When using a normal die to foil with there is not enough pressure for the die to cut. You will have a nice foiled image of the highest edge which will be the cutting edge. Thank you.

[@gizztoff]

I have the laminator foil, just brought a ton of it. Can it be used with this and i have a Gemini and a small cuttlebug and a siss x bigshot . Will it go through any of these please and I don't suppose you can give me an idea of the price . Thank you

[@CoutureCreations]

Hi Tina, If you use a toner activated product along with toner activated foil the Go Press & Foil machine will produce enough heat as long as your project your trying to foil is thin enough to fit in your die cutting machine. The Go Press & Foil machine works really well with our heat activated foil and our metal hot foil stamps. The Go Press & Foil machine will work with a Cuttlebug and Bigshot as well as our diecutting machine Cut n Go Pro or the Go Cut & Emboss machine. Hope this helps. Thanks

[@blossomflower4575]

What cuttlebug machine do I need for this foil machine please I have a grand calibur but will not take the plate.

[@anitaenright6054]

Hi Blossom, any Cuttlebug machine will take the GoPress and Foil platform. Unfortunately it will not work in the Grand Calibur.

[@vickiabraham3067]

will this plate go thru the cuttlebug machine??????

[@CoutureCreations]

Absolutely! Our Heating Platform is compatible with most popular machines provided the they have an aperture of 6 inches or over

[@vickiabraham3067]

thanks

[@patriciatreslove146]

Can you use any stamps, or do they have to be the new type?

[@CoutureCreations]

Hi Patricia, The stamps are not a normal acrylic or rubber stamps that you stamp with. The best way to describe the die is they are similar to a die without the cutting edge.

[@sonaljethwa1575]

It was mentioned on hsn as well on your website toner reactive foils can also be used so far I have no luck can anyone explain please

[@anitaenright6054]

Heat reactive foils are required with the machine.

[@CoutureCreations]

Hi Sonal, As long as you are using a toner activated product along with the toner activated foil together. If you are trying to use toner activated foil with a hot foil stamp you won't get a good result as the hot foil stamps need heat activated foil to get the best result.

[@trevanji]

At 9.39 you mention 'letter pressing'. What is the difference between an embossing folder -- either side of the folder: raised or the opposite -- and letter pressing? Thanks so much :-).

[@CoutureCreations]

Hi Angie, Great question. Easiest way to Letterpress with the Go Press & Foil Machine - Don't turn your machine on, put your hotfoil stamp on the grey platform face up, then cardstock, close the lid and then run the platform through your die cutting machine. Depending on your die cutting machine, you may need a cardboard shim or two on top of the closed lid. You will end up with an emboss design from your hotfoil stamp into your cardstock. Hope this helps. Thanks.

[@trevanji]

I think I meant { forgive my brain or memory.... :-) } : what is 'letterpressing' ? Is it the actual "indentation" of 1) letters or 2) numbers into the material used? 1 and 2 rather than scenes or figures of people or animals. I hope I haven't confused, I am just going off the word: LETTERpressing to make my point/question :-).

[@CoutureCreations]

Hi Angie, Letterpress is the indentation of a pattern or image (in this case the hotfoil stamp your using) into your cardstock. Thanks

[@lornaholliday54]

I have tried using plain cardstock die cut doily with a metal shim and I can't get a good coverage of foil. Do I have to use rough cardstock or do I have to roughen the card stock to get it to stick?

[@CoutureCreations]

Hi Lorna, You may need to bond several images of the die cut together to get a good height and then be able to foil the image. I do find smooth cardstock does work a little better as you good a good coverage of the foil. Please email us at [e-mail] if you have any further problems. Thanks.

[@debilowery944]

Will this be available in the US ? thanks....hope so. Also will the bond adhesive be available in the US ?

[@CoutureCreations]

Hi Debi! The GoPress and Foil machine will be available from HSN in the US very soon - follow us on Facebook for more: facebook.com/AnnaGriffinInc/photos/a.191554031892.128233.107263956892/10154903904461893/?type=3&hc_ref=PAGES_TIMELINE

[@candacekieper4354]

Debi Lowery found on HSN tonight

[@benedictehjalting7227]

Can it go through my gran calibur?

[@CoutureCreations]

Hi Benedicte, sorry I don't believe the Grand Calibur has enough height for the platform to go through. Thanks

[@justalittlebitofcrafting]

When you used the embossing folder - was the foil raised? Couldn't tell with the finished product. Thank you!

[@CoutureCreations]

Hi Maria, The foil is placed shiny side down. The setup should be the following placed on the grey heating pad. Metal Shim/Foil-shiny side down/Cardstock/Cpened embossing folder facing down. Thank you.

[@ThriftyCrafterMale]

hello there great product, question is that double side tape or heat bond tape? tfs

[@CoutureCreations]

Hi RJ Die Cut'n Bond creates paper thin double sided adhesive sheets, similar to jac paper

[@beverlylee6357]

Does the foil transfer flat or does it come out debossed/embossed?

[@CoutureCreations]

Hi Beverley it will come out flat.

[@tanyahodge2795]

Hi, can you tell me what the embossing folder is that you have used for this video please...

[@Kiraneries]

I have just received a GoPress and Foil machine and it will not go through my Craftwell Cut'n'Boss electric machine. Sandwiched between two A plates it will not go through, it is too thick. You say acrylic lid can be removed, so how does it come off?

[@CoutureCreations]

Hi Kiraneries, the GoPress and Foil base plate should be on the bottom followed by 2 x A plates and 1 x B plate on top. Do you have an email where I can send through an image of how it should work?

[@Kiraneries]

Hi, I have worked it out and had some good results. For my UK model Craftwell Cut n Boss it is the GoPress with a shim of 100 gsm paper then the plastic B plate. Your suggested sandwich is much too thick to go through.

[@CoutureCreations]

That's excellent. Thank you for letting us know. Enjoy your new machine.

[@judypittman5218]

I own a Go Press foiling machine , can you tell me where I can buy a metal shim in the U.S.?

[@CoutureCreations]

Hi Judy, try A Cherry on Top. They should be able to assist.

[@EleganceMS]

all of the die cutting machines you have shown are manual, I have an electronic cut n boss, it has a wide enough mouth to take the Sizzix blade type dies, will it work on the foil machine please?

[@anitaenright6054]

Hi Mary, the machine will work with the Cut n Boss machine. The GoPress and Foil platform is narrower. You just need to place the platform on the bottom followed by 2 x A plates and then a B plate on the top to activate the rollers on your machine. I hope this helps.

[@sophiaschell2000]

Is the B plate the same as the B plate for the Cuttlebug or will I need to get one that is specific to the GoCut & Emboss machine? Also, will any metal shim work? Are the associated stamps available today...if yes, where? Thanks much!

[@kathleenmills7452]

Sophia Schell I've found the foil impression dies on eBay, as well as online several places!

[@ehodge54]

Great video. Do you know if the GoPress will work with the We R Memory Keepers Evolution machine?

[@CoutureCreations]

Hi Liz, Sorry I am not familiar with the sizing of that machine. The platform of the Go Press & Foil machine is 15cm wide and approx just over 2cm high. Hope this helps. Thanks

[@cindysolly306]

Can you use it with any other machine.

[@CoutureCreations]

Hi Cindy, The GoPress and Foil will work alongside many popular embossing machines on the market today - your machine just needs to have an aperture that is large enough to accept our heating platform

[@CoutureCreations]

Hi Cindy, The GoPress and Foil will work alongside many popular embossing machines on the market today - your machine just needs to have an aperture that is large enough to accept our heating platform

[@debbiel890]

Just come across this - can you use any foil with this machine ? and does it work in the UK ?

[@CoutureCreations]

Hi Debbie, to get the best result we have 70 different colours of heat activated foil to use along with our hot foil stamps. The machines are also available to purchase in the UK. If you would like a copy of all the foils available please send an email to [e-mail] Thanks

[@sandeeww1]

When did this machine come out?

[@CoutureCreations]

about 3 years ago :)

[@vikkiralph8439]

Hi! Can we use regular sizzix thinlit dies in the go press & foil machine? Thank you

[@CoutureCreations]

Hi Vikki, Yes you can use regular dies but you will only get the thin cutting line foiled.

[@vikkiralph8439]

Couture Creations thanks for getting back to me. Don’t suppose you’ve done a detailed tutorial??? May thanks. Love your videos. :-)

[@CoutureCreations]

Hi Vicki, If you search our blog with Go Press & Foil there are lots of ideas with close up photos. The blog link is: couturecreationsaus.blogspot.com.au Happy Crafting.

[@copicqwn]

I tried the Minc foil and the Deco Foils with your machine. They do not adhere to the paper. I've let it heat for at least 5 minutes on the hot plate; sometimes I tried to heat the metal shim in addition. I've also turned the foil the opposite way just to see if it would do anything. I have had no luck with the Minc and Deco Foils. Your website says it uses Minc foils, but I have that it is not the case.. do you have any other recommendations

[@kathleenmills7452]

copicqwn I don't believe Minc foils and deco foils are heat activated foils. With the minc, you'd think they were as the Minc machine (and laminators) use heat, but that is to 'melt' the adhesive or toner (which is really acting as an adhesive!). I found this art deco foil available online through several places and it's not expensive, but also any type of HEAT activated foil will work. Hope this is helpful! KateCreated

[@iannaomivause6474]

I notice on all the things you hotfoil that it is missing bits of foil, thats the same problem Im having which I think for such an expensive machine it should foil much better than it does.

[@CoutureCreations]

Hi Naomi, If you would like to send through some photos via email to [e-mail] we can help you out with a solution. Thanks

[@vickylee2707]

where can I buy the metal plate?

[@kathleenmills7452]

Vicky Michot I've seen them on eBay, and I think online at A Cherry on Top. I need one too!

[@vickylee2707]

Thank you Kathleen Mills, I will take a look!

[@livingwellraby2501]

Mine didn’t come w/ a metal plate/shim

[@CoutureCreations]

Hi, The metal plates/shim are sold separately. Thanks and Happy Crafting.

[@loulousmum]

Hi, I've just foiled my stamp by mistake... is that going to ruin it cos I've just tried it again and it's not foiling the card very well now... sob :0(

[@CoutureCreations]

Hi, If you have accidently foiled your metal hotfoil stamp it won't effect the stamp at all. If you are concerned try cleaning your metal stamp with turps and then giving it a thorough clean with soap and water. Hope this helps. Thanks

[@trevanji]

And finally at 11.06 what was the point of the ...Bond material?

[@candacekieper4354]

do you need a separate metal shim?

[@CoutureCreations]

Hi Candace yes, you can use a separate metal shim with the GoPress and Foil Machine. You do need to purchase this separately but if you already have one for your diecutting machine you can just use the one you have unless it is warped you really need it to be flat otherwise you won't get a good clean foiling You only need the metal shim when you are foiling chipboard and with embossing folders - not when using the hot foil stamps or thin metal dies.

[@annpennington8349]

My new Go Press and foil does not go through my grand calubur

[@CoutureCreations]

Hi Ann, Could you please contact us via [e-mail] Thank you

[@kayladavidson9439]

Amazing!! Thankyou :)

[@cheryljagger425]

Can I use my Spellbinders Platinum cut and emboss machine with GoPress and Foil Machine?

[@CoutureCreations]

Hi Cheryl, yes the GoPress and Foil will work with your Spellbinders Platinum.

[@KM-oq5yi]

@CoutureCreations Hi Cheryl, what about my Spellbinders Grand Calibur?

[@BeatlesFanSonia]

The metal shim does not come with the machine

[@Cre8tiveConnexionsbyLillia]

Mine did and I did not buy the die cutter only this one. It was years ago though and I was hoping to buy an extra one for one of the ideas shown in this video where they use two.

[@diannenieto4061]

I don't know why anyone would have any other type of foiling device if they already have a die cutting machine!!!!!

[@CoutureCreations]

Hi Dianne, The GoPress & Foil Machine works differently and heats up, and combined hot foils stamps or Cut & Create dies and your die cutting machine creates a beautiful elegent foiled finish to your project.