Thank you very much mr. Prasad, by an engineering student from Italy. This explanation has cleared all my doubts in matter which I had from my last Metallic Materials class! I also suggested this to many of my fellow classmates.
@rajeshprasad1015 жыл бұрын
I am happy that it was useful for you. What academic program you are in? At what university? I visited the University of Trento in 2014.
@vittoriopiaser92335 жыл бұрын
I’m a student of Mechanical Engineering at University of Padua, close to Venice.
@vittoriopiaser92335 жыл бұрын
I’ve also seen you teach in Delhi, I’ve never been there but I had the luck to come to Maharashtra in 2012
@introductiontomaterialsscience5 жыл бұрын
How did you see me teach in Delhi!!
@vittoriopiaser92335 жыл бұрын
Introduction to Materials Science and Engineering excuse me, I got wrong 😓 I mean I’ve also seen many of your other lectures online, which I presumed were recorded from Delhi.
@mohammadnaseeruddinshad54625 жыл бұрын
This is Exactly what every student want thank you.
@diwakartiwari91555 жыл бұрын
🙏🙏🙏🙏🙏🙏🙏🙏 special one I badly needed this,,, what a extraordinary explanation 😊
@Unknown-rh5jh6 жыл бұрын
brilliant explanation...
@manohar_084 жыл бұрын
Very simple to understand sir I am watching from Sri Lanka
@introductiontomaterialsscience4 жыл бұрын
Thanks and welcome
@balbirMs3 жыл бұрын
You have covered all my doubts in this 10 min video. Thank you Sir.
@priyanshigarg57286 жыл бұрын
Sir very very very excellent and helpful explanation...... Really understand the concept....
@Aman-nk5uq5 жыл бұрын
Priyanshi Garg are u preparing for GATE?
@shardulsemwal294 жыл бұрын
thank you sir for this elaborate explanation. Our professor explained it in a bit boring way .
@introductiontomaterialsscience4 жыл бұрын
Glad it was helpful!
@Amankumar-fq3be5 жыл бұрын
How and why half plane get disappear
@rajavikram2475 жыл бұрын
No half plane will not get disappear,sir explained why the name edge dislocation is given to the defect..he just viewed the cube in different orientations and proved that we can't name it in those ways..
@akshaykumarmaurya994 жыл бұрын
i am not able to get why 7 dislikes
@sexychantu50663 жыл бұрын
SOME PEOPLE JUST HATE THANKS AND REGARDS SEXY CHANTU
@chaithanyaagurunathan45424 жыл бұрын
What a beautiful explanation for why is it called "Edge" dislocation thank u very much sir!! These minute concepts we can never find in textbooks ! Thanks once again sir
@rameshbanoth87946 жыл бұрын
superbbbbbbbbbbbbb
@maulikruparel78315 жыл бұрын
Thanks for sharing..!
@MukeshYadav-wb5uo5 жыл бұрын
Oh my god It can be so simple I never thought that. Superb sir
@frankcarey2505 жыл бұрын
Excellent as always
@victormbebe37973 жыл бұрын
amzing. I'm student of aerospace eng. and i'm impressed
@Test-ri2kr3 жыл бұрын
Hello sir, how are you finding aerospace engineering?
@victormbebe37973 жыл бұрын
well, i feel that i have a huge responsability doing this course
@sritejarasa57755 жыл бұрын
Thank you very much sir.
@rishavkumar_PanditАй бұрын
Sir ji thanks 🙏
@ibrahimnazemqader91535 жыл бұрын
thanks
@UjjwalSingh-ki7sk5 жыл бұрын
Hats off sir
@pranav93392 жыл бұрын
Can we assume all those points being lattice points? Where 4 lattice points form a simple cubic unit cell
@k.sjadhav83609 ай бұрын
Thank you sir.
@nishanthilawala4804 Жыл бұрын
Thanks for the concise explanation 🙂....
@rameshram-gc4sm6 жыл бұрын
Awesome
@adityaadwivedi5953 Жыл бұрын
thank you sir
@shubhambhavsar42375 жыл бұрын
this is what i exactly want. Thank you so much sir
@ravithakur00415 жыл бұрын
Sir pls tell which force is responsible for edge dislocation - tension/compression or shear force ??
@vishwanathreddy17125 жыл бұрын
Isn't it shear?
@ravithakur00415 жыл бұрын
Means shear force is responsible edge dislocation ?
@vishwanathreddy17125 жыл бұрын
@@ravithakur0041 not sure
@MrFaiqueShakil4 жыл бұрын
@@vishwanathreddy1712 no man
@rajavikram2475 жыл бұрын
Superb and amazing explanation sir.i confused a lot about why the name edge dislocation is given to this phenomenon..and as you explained by comparing it with thread..it gave a glow in my mind sir..superb sir👌👌..i hope i can get much more ideas if i follow your videos sir as i am planning to do reasearch on materials engineering..Thanks a lot sir..
@kkthegreat3 жыл бұрын
Thank you so much sir 🙏
@AJAYJAISONBTechMEA-3 жыл бұрын
What a explanation sir. U are absolutely fabulous
@kMEAmartyaPrabhakar4 жыл бұрын
Very helpful lecture.Thank you sir
@meenakshisharma73674 жыл бұрын
Thanku Soo mchh sir for this brilliant lecture 🙏🙏
@yashodabhattarai42063 жыл бұрын
Wow, this is brilliant explanation🙏
@vatty975 жыл бұрын
Thank you for you explanation! Very understandable and simple lesson.
@cheers2life5785 жыл бұрын
Best of all time :) It really help us learn and built our basics :) Thank you so much sir
@fakeidofathug98593 жыл бұрын
SIR PLEASE TAKE ME HOME!
@preethikabalasubramaniam12153 жыл бұрын
Excellent explanation
@paru0022 жыл бұрын
Thank u so much
@ajayjaison97563 жыл бұрын
Outstanding class
@norbusherpa29363 жыл бұрын
thank you
@hasir_dh3 жыл бұрын
Thats amazing.....👍
@srujaniam97624 жыл бұрын
brilliant explanation , thank you sir
@harivignesh96173 жыл бұрын
Vera mari Vera mari 🔥
@avusulagnaneshwar9484 жыл бұрын
is that edge containing line of atoms dislocation or the region below the line of atom ????
@syedhasnainali82824 жыл бұрын
Region directly below the last line of atoms
@fakeidofathug98593 жыл бұрын
THE PERFECT TEACHER EXISTS!
@anujjain44345 жыл бұрын
🙏🙏🙏 very nice explanation.
@dilipkush.93154 жыл бұрын
Love you sir, God bless you 🙏
@ashwiniak43505 жыл бұрын
Nicely explained.
@suan_tech20195 жыл бұрын
Thankyou so much
@ilahahasanova42633 жыл бұрын
Thank you very much for such a clear explanation! It helped a lot!
@sexychantu50663 жыл бұрын
DID YOU UNDERSTAND WHAT HE SAID AT 5:43?? THANKS AND REGARDS SEXY CHANTU
@ilahahasanova42633 жыл бұрын
@@sexychantu5066 Prof. Prasad said that if you look at lower part of crystal (lower part of its face, which we see pictured on the page) you can see that it looks normal-i.e. it looks as if there is no any defect. So although we need to imagine inserting or removing half planes into normal crystal structure in order to imagine this defect, in reality this defect is not about plane. It is edge defect.
@sexychantu50663 жыл бұрын
@@ilahahasanova4263 THANKS A LOT ILAHA, THIS WAS VERY HELPFUL. GONNA TOP MY UNIVERSITY EXAMS. THANKS AND REGARDS. SEXY CHANTU
@sexychantu50663 жыл бұрын
@@ilahahasanova4263 ALSO ARE YOU THE REAL ILAHA HASANOVA OR IS THIS A FAKE ACCOUNT :( THANKS AND REGARDS SEXY CHANTU