INTRUDER VS 1400 SUZUKI [ How to .. ? Replace tires ] @ SongoLand Garage

█║▌│█│║▌║││█║▌│║▌║▌║│║
SongoLand Garage 2017 KZbin
█░░░█ █▀▀ █░░ █▀▀ █▀▀█ █▀▄▀█ █▀▀
█▄█▄█ █▀▀ █░░ █░░ █░░█ █░▀░█ █▀▀
░▀░▀░ ▀▀▀ ▀▀▀ ▀▀▀ ▀▀▀▀ ▀░░░▀ ▀▀▀
Hello friends, Here I share the first video of the channel :), is a bit long, but is that in the end I spent quite some time with the bike.
I have mounted new covers Comander II and also I have checked the brakes of my intruder vs 1400. I hope it can be useful to someone.
Thanks for stopping by my garage.
______________________________________
Here are some interesting links for motorcycle and car accessories.
Best price in Automobiles & Motorcycle 👉 bit.ly/2sLXcfY
If you want to print 3D some improvements, I recommend you go through this link 👉 bit.ly/SongoLand
Other nice places i enjoy in my hobby:
Section dedicated Photography & FPV 👉 bit.ly/2jXDmYa
Section dedicated 3D printers 👉 bit.ly/2j5BfBt
Cool toys & Hobbys: 👉 ​​bit.ly/2gWUZpy
More coupons here: 👉http: //bit.ly/2g3Z3CW
Section dedicated to RC 👉 bit.ly/2jzdGl5
Extra discount use code: SongoLand or Rc15off
Want to see more videos?
Have a look in my RC Channel :) 👉 bit.ly/SongoLand
If you liked the video, subscribe!
More videos coming soon.
█▀▀ █▀▀█ █▀▀▄ █▀▀▀ █▀▀█ 　 █░░ █▀▀█ █▀▀▄ █▀▀▄
▀▀█ █░░█ █░░█ █░▀█ █░░█ 　 █░░ █▄▄█ █░░█ █░░█
▀▀▀ ▀▀▀▀ ▀░░▀ ▀▀▀▀ ▀▀▀▀ 　 ▀▀▀ ▀░░▀ ▀░░▀ ▀▀▀░

[@paulm3775]

I have always been curious on how to separate the rear wheel from the shaft drive. It's not as bad as I thought it would be. I still have quite a bit of thread left on my rear tire but thanks to this video, when the time comes to change the tire I'll be able to save some money by removing the rear wheel myself. Thank you for sharing the procedure with us.

[@songolandgarage7615]

:) you are welcome friend Paul M. has you see is easy process, and yes, you can save good money (and no body else touch your bike) mecanics are like dentist aahaha, they do it every day , and dont think on the pain xDD a greeting and pleas subscribe

[@cHUCHo458]

I have pulled both rear wheels off my two bikes, the 1400 just to replace the intertube after a picked up a nail, also I took out the one off the 800 to replace the tire. I was able to pull the wheel off on both without taking the driveshaft off, don't remember what I did but it worked and save me some of the work. Good video brother, thank you!

[@songolandgarage7615]

thanks for your coment friend Chucho Chucho, may be your rear fender is diferent of my one? becouse i can not lift more the bike , i decided to doit this way , may be is not the correct one xDD but was working for me. in the same i take advangage and put some grase on it aahah, a greeting and thanks for tune in. Hope you subscribe to songoland garage . a greeting

[@carlosherzer4864]

Vídeo excelente,não achei da vs 800 mas esse é o mesmo sistema, parabéns e obrigado!

[@chevyesteller3245]

Buena la intruder 1400 ,y muy buenos temas de fondo

[@felixgonzalez6809]

Muchas gracias por el video... exelente video

[@Shaiy007]

I also have a set of Michellin Commander II! Great tires! 👍👍🙌

[@songolandgarage7615]

hi S. Dalton, :) thanks lots for stop and coment my friend! first time i try this tyres but just in love with they.. have a good weekend

[@mikeherman8286]

Thanks for making this video, mucho gracias!!

[@flycamjohn]

Thanks for the video it helps alot 👍

[@songolandgarage7615]

im so happy to read your coment friend, have anice weekend

[@ErnestKwokguitarist]

Interesting video, thanks amigo 😊

[@songolandgarage7615]

thanks friend Ernest!

[@Ben7Seven]

Nice vid, really enjoyed it(:

[@BucketWheat]

I run the Avon or Metzler tires on my VS1400... in the 200 x 15 size. They Perform Great, and LOOK GREAT !! And the 200 is just a bit taller, so it gives better mileage. And I ride 'aggressive' including twisty mountain roads... and have never had slippage or a felling of anything but sure-footed grip.

[@dennisforster4241]

Great job, I now know how to do it to my bike.

[@songolandgarage7615]

thank you friend :)

[@salvadorcabrera5837]

Nice video...thank you bro...!!!

[@songolandgarage7615]

:) you are welcome, thanks to you for tune in sonogland garage, a greeting

[@fluxo2008]

Hello, the video is very good because in addition to demonstrating how to do the exchange of tires at the same time is tnatural and demonstrates all the eroos we commit when we do not have much experience, and this is good because we learned a lot and we can see the difficulties with the which we will deal with. Congratulations and you have one more follower, because I have a motorcycle and I will replace the brake pads in the next days. During the winter I will change the rims and spokes but still do not know where to find them in steel or stainless steel. Do you have any suggestions? greetings José António Fernandes Portugal

[@thomastessin1663]

Looks like a pain. Moto Mechs sure earn every cent!

[@cwestbrook5663]

Thank You !

[@songolandgarage7615]

:) you are welcome friend.

[@gettodachopper]

Greetings from germany! Found and subscribed you :D

[@michaeltomlinson3887]

Nice vid.....what bike are your rear shocks from? what length are they?

[@The52r]

Nice channel. Subbed ;)

[@songolandgarage7615]

thanks The52r , soo cool see you around here :) a greeitng and good weekend

[@michalkoff4684]

Like from Russia!

[@Tacbi0325]

U still have the intruder ?? Is very nice job man thumbs up for u!!!

[@HonzaNevrela]

You forgot to put silicone between the shaft housing and back ;-) or as suzuki says” special suzuki bondo” 😋👍 rest good job. It did mine week a go

[@johndoedidntdoit]

What were you doing on the other side of the bike when you were pulling the axel out? Im stuck trying to get my front wheel off my intruder

[@thornortheastregionaltruck2392]

Thx for the video. Where did you get the rear fender and solo seat? Looks great..

[@songolandgarage7615]

thanks lots friend :) the seat was a diy rebuild of the original , and the fender was mod from one harley accesorie. light and plate number holder and signal lights i found them on ebay. im glad you like it. send you a greeting

[@mikeymike3240]

hi there, I owe you an apology. when you were refitting the rear wheel, I was shouting at you, don't forget the shaft spacer, don't forget the wheel spacer, don't forget the brake caliper bracket, don't forget to grease everything. lol, I'm shouting and laughing 😂 at the same time, as if I was doing it myself. hahaha. great job, but I thought the rear brake pads looked pretty good, but I suppose I would have changed them as well at the same time, it just makes more sense. lol 😁 👍 👍 👍

[@songolandgarage7615]

aahahah,, soo right friend Mikey mike , i forgot to put the spacer and i need to take the diff again aahah , thanks lots for wathing the video dude, happy that you enjoy it. Hope soon i can upload som more videos. a greeting and have a nice weekend

[@marekrockermarek7121]

hello friend. I have just watched your video and I have a question . Is it possible to fit in the tyre size 180 to vs1.4 ? Greetings from Poland.

[@SMITTYXCOREISHXC]

are you using stock size carb jets in your intruder?

[@jarojakacki8658]

Hi! I see You had Pirelli MT66 Route on front. I'm going to buy MT66 for my VS1400 - both: front and rear. How do You think - is this good idea, or not? I know that Commander II are one of the best (or even just "the best") tires in this time, but I like the look of MT66 very much! (this "PIRELLI" on the side wall...I love it!) Do You have any comment to this MT66? Thanx 4 your opinion!

[@songolandgarage7615]

Hi friend Jaro , thanks lots for your coment. I have test bouth , and yeha bouth work really well. Then in my opinion any of this two will be a great selecion for enjoy. A greeting my friend

[@hondatact92]

Hello! Please tell me. What motorcycle or car are the rear shock absorbers from? My shock absorbers are broken and I want to change. Sorry if I write with errors. I use an online translator.

[@BurninTatorzEnt]

Is that factory or aftermarket rake on that?

[@ManuelLopez-mb5sb]

Buen video... No es un jeep pero mañosete eres y reparar debes...

[@kjrutter17]

The rear wheel is a heavy bugger on these !!

[@songolandgarage7615]

yeha! jeje, is a bit fun to take that wheel out :P , a greeting friend, and thanks lots for stop by songoland and comenting. a greeting

[@peter455sd]

Take it easy boys,it's amateur night...

[@MFP2241]

... Is that a raked triple tree?

[@chris59862]

Hi, can u plz tell me what’s the size (length) of the shock absorbers, I have the 800 version and I wanna lower the bike but don’t know what length I should go for Much appreciated

[@songolandgarage7615]

Hi, my shock absorbers have 33cm hope that helps.

[@chris59862]

Thanks

[@songolandgarage7615]

;)

[@johnbird4493]

This should be labeled as How NOT to remove your rear wheel! There is no need to loosen/remove the final drive or the shock to get the rear wheel off! Please watch more videos OR look at a service manual to save yourselves a ton of work and time!!!

[@songolandgarage7615]

mine is modified and is necessary. Do you think I would remove it if it weren't? really? think a bit before speaking

[@jerryking1434]

Wheres the video you made ..to prove your point ... Oh yea ..thats right ... You didn't..

[@popeyethepirate2902]

24:18 every time .

[@vukwolf1687]

Imao Sam vs intruder 1400 to je motor br 1 Harley Davidson je kurac za ovaj intruder vs 1400 pozz MRKI Vuk 🐺🇷🇸👍

[@stolivija]

За чем было кардан вынимать.....

[@songolandgarage7615]

hi , only need to pop in and out, easy

[@gasparecipri1611]

@@songolandgarage7615Bravo un bel lavoro, scusa ma il garage dove si trova esattamente, grazie.

[@joeconnectall627]

I ran into this vid and said to myself... another guy that doesn't know how to read a manual. You do NOT NOT NOT have to remove the drive shaft housing to remove the rear wheel of an Intruder 1400. I own 2 of them; a 1987 and a 2000. I've change tires about 10 times total between the bikes. You remove the brake caliper assembly, the axle and spacer ... and nothing else; and I mean NOTHING else, and that includes the shocks... BOTH of them. That's why there is the wider spacer on the right side of the wheel. This will allow you clearance to slide the tire over to the right 'releasing' it from the shaft housing drive gears. Think about it... would the Japs design a bike that you would have take the whole rear end off just to change a tire ???? That is something Harley would do- the Japanese know better. This vid needs to be taken down. I know you're trying to help people but... you're not helping anybody. The next time I do a rear tire change... I'll post a vid. Ride safe everybody.

[@songolandgarage7615]

mine is modified and is necessary. Do you think I would remove it if it weren't? really? think a bit before speaking

[@jerryking1434]

Easy big fella ... Your about to blow up..