Thank you my mistake was the Pin and the GPIO was changed. With your simple explenation I could find the error, (you Changed D2 to D4) in My place D7 was not D7 it was D13. That solved my Webhook Problem that resetet the NodeMCU after every Alexa command. You did a god Job!
@borisjelcic11974 жыл бұрын
Go to 9:25 and see witch pin on your NODMCU is the right GPIO pin you have to change them to the right. Pin D1 is not GPIO 1 so you have to find the right pin to define in code than it should work.
@ronaldleon69524 жыл бұрын
you're a legend sir made my day
@borrapraneeth79643 жыл бұрын
Can we connect a regular fan to the project please say......
@pedrovinicius36212 жыл бұрын
This video is a masterpiece, thanks for save my semester
@nikolas87412 жыл бұрын
Thanks for sharing!
@Ezequielmartinez-xp4gp2 жыл бұрын
thank you for the video.
@allawi_jalal15962 жыл бұрын
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?
@samadfx15643 жыл бұрын
THANKS AA LOT SIR MY PROBLEM ARE SOLVE MAY YOU LIVE LONG
@prayagsutar66343 жыл бұрын
Thanks sir I wass confused with D0 and G PINs finallly my projects is working
@electronic79794 жыл бұрын
Super 👍
@astevassistant62764 жыл бұрын
How can i display sensor value on Google Assistant
@batachannel.1233 жыл бұрын
ありがとうございます。できました。
@DigitalTrading3 жыл бұрын
Can we control multiple remote smart plugs which are connected to different networks from one app/place/cloud?
@Rahul.Pundir3 жыл бұрын
Sir commands are very slowly working Whenever i on or off switch it takes 10 sec to on or off
@jijeshkorothpoyil26972 жыл бұрын
Hai Can we use the same single nodemcu to work with ifttt and blynk simultaneously in a single program? Ie; I need to get telegram call when motion detected in my home and I should be able to control my lights through blynk. Is it possible?
@Lomanis_3 жыл бұрын
Hi, I have a question, how would I if I wanted to say the voice command to activate and deactivate after a short time without having to add two different commands, in other words it works as a doorbell button and not as a switch of light, thank you translated by google translator
@geetank1003 жыл бұрын
Sir, How do we add manual on/off button in Google assistant just like we have in Blynk App?
@sudheerillipilli46912 жыл бұрын
sir i did same like u so, blynk works but google assistant did not work.plz give some suggestion
@TravelGeekLinux3 жыл бұрын
sir will you please help me to setup google assistant because when i firing trigger assistant went to google search? pls help
@saikatd90373 жыл бұрын
IFTTT not providing more than 3 applets free. In this how can I do this project
@endlesspossibilitiesofarud11023 жыл бұрын
hi I have a dought that can I do this project with an Arduino Uno waiting for the reply one one more dought that can I do this project with a blynk local sever
@arghyadey59934 жыл бұрын
Thanks sir ... helpful video sir
@arielo614 жыл бұрын
excelent!!! Sir, how can i do it with a servo mg995? thanks!
@juanmateu54854 жыл бұрын
Thanks friend great tutorial, but what if we want to control a button to open the garage door. it could be ["1> 500 ms delay> 0]"
@israelbr40194 жыл бұрын
Se puede hacer eso?
@ReejohnStellas4 жыл бұрын
and can i control 2 servo motor at a same time using google assistant
@axramar19924 жыл бұрын
Hai sir Im doing GSM based Blynk project, I am facing this problem What if Device disconnects from GPRS? How to handle it ? Did you implement Watchdog timer with Blynk ? using GSM sim800L and Atmega328p-pu for my Blynk project, it disconnected after 3days, then I had to restart the device manually, I don't want to do this manually,I also tried Watchdog timer,but it fails to work with Blynk.please help
@primetekautomation39354 жыл бұрын
Hello i made this but this project work with my mobile hotspot internet When i connect in my home wifi router he is not connect serial monotor show blyank-cloud.80 Please tell me what i do ....
@yiannossofocleous1144 жыл бұрын
How to trigger 2 pins with a single command. Also how to add duration to a command??
@hameedasmath55764 жыл бұрын
How do I find weather my relay board is low powered or high
@muzaffarbashir45663 жыл бұрын
add manual switches also
@TheMateusCirolini4 жыл бұрын
thanks for making video. i did it successfully
@hameedasmath55764 жыл бұрын
Did the device works with google assistant
@edmremix8924 жыл бұрын
thanks this is great project
@ReejohnStellas4 жыл бұрын
can i control servo motor using google assistant ????
@shakerileiwat43414 жыл бұрын
Amazing, great job
@mattrichardson43514 жыл бұрын
I’ve done this for a temperature sensor .. will I need to change anything
@efabitog4 жыл бұрын
Hello, how can I turn on the light and the fan at the same time? how is the url code?
@aldopg78123 жыл бұрын
Thank you so much :)
@gabriel-qw3cm4 жыл бұрын
Thank you kind sir, it worked
@cw46084 жыл бұрын
Sir I receive a 500 error on ifttt. I have checked everything and it appears to be correct. Is there something else I should look for to determine the reason?
@javiaronak4 жыл бұрын
thanks for making video. i did it successfully i have 3 light and i want to all lights on OR off in one command then how to write in webhook URL section ?
@efabitog4 жыл бұрын
hola, tambien quiero saber como es ese comando
@ajeetyadav57833 жыл бұрын
Can you share the code
@maazshaik65144 жыл бұрын
I do already same think but showing error 404 on fittt web site
@hanysaad1754 жыл бұрын
URL NOT PROVIDED PLZ PROVIDE THE URL LINK WHICH U INPUT IN WEBHOOK
@madhusudanglanjewar28704 жыл бұрын
Sir can you make on the video to control the device through Blynk app by using micropython (thonny IDE)
@prakash50472 жыл бұрын
webhooks not working on my project
@TOMTOM-nh3nl4 жыл бұрын
Thank You
@bodalasagarika35394 жыл бұрын
SIR I was getting like something went wrong and unable to control home device from google assistant
@ilakshmaurya34743 жыл бұрын
Even I have the same problem
@ReejohnStellas4 жыл бұрын
thanks sir
@Charls_Shobharaj4 жыл бұрын
Amazing project...I did it successfully...Thank you....
@yarogniew4 жыл бұрын
excellent work, thank you, but why ["0"] is ON and ["1"] is OFF? ;)
@SaravananAL4 жыл бұрын
Relay board used is LOW enabled. A LOW switches ON the relay and a HIGH switches OFF.
@yarogniew4 жыл бұрын
@@SaravananAL I see, ok. Thank you.
@I_am_smooth_as_butter4 жыл бұрын
@@SaravananAL why applet is showing error 500 ..is that due to blynk cloud server.. please check your's now and tell me sir.. it's urgent
@sharikhmusthafa86923 жыл бұрын
how to control D4 and D5 in single command
@patelkingr88254 жыл бұрын
Sir, what i need to do if i want to make web request to control digital pin of raspberry Pi using Google assistance
@tek9ine1304 жыл бұрын
You can call an API with Webhook which can publish on or off on the mqtt topic
@juanmateu54854 жыл бұрын
use a push button not a switch
@israelbr40194 жыл бұрын
No me activa ifttt con Google Asistant me sale error 404
@veereshm22614 жыл бұрын
sir, thank you very much for helping me to do this project .google assistant in my phone responds to my commands but does not tell , ok turning the light on or off what may the problem.please reply.
@hxw-hawk4 жыл бұрын
You have to enter the response phrase when setting up IFTTT applet.
@hxw-hawk4 жыл бұрын
It's "What do you want the Assistant to say in response?"
@reviewtutorial8912 Жыл бұрын
I need code sir, can u help me
@electriceyepvtltd4 жыл бұрын
Sir ap online training dete h
@ahmedelgoumiri45652 жыл бұрын
give me to code plz
@ReejohnStellas4 жыл бұрын
reply me fast i have to do it now
@konadhanalakshmi89623 жыл бұрын
sir code
@samanta57gaming523 жыл бұрын
Coding please
@dayyababdullahi64644 жыл бұрын
sir, you are so talent please sir how to create free internet with others board esp8266 or Arduino etc.
@electricfieldtv7094 жыл бұрын
now google assistant cant do that?? you must pay to do it
@tbd64034 жыл бұрын
where is this info coming from
@allawi_jalal15962 жыл бұрын
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?
@allawi_jalal15962 жыл бұрын
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?
@allawi_jalal15962 жыл бұрын
The situation is different now after the blynk site update that they don't send the authentication code on email. So what do we do now?