I got way too obsessed with collets, and now you can too! Topics include: collets, collet storage, collet blocks, and experimental ways of using collet blocks. Collet storage collar model: www.thingivers...
Пікірлер: 33
@siliconchef Жыл бұрын
Emphatic Siren is my all mermaid Indigo Girls cover band
@TradeWorks_ConstructionАй бұрын
Excellent concept and Idea! If you need to index by more than 10 then you probably should be using a dividing head. For anything less COLLET BLOCKS and Shims for the WIN!
@josuelservin Жыл бұрын
What a beautiful end entertaining video, the ideas within are somewhat twisted and have planted a dark and intriguing seed into my brain that without a doubt will diminish my wallet and social life... Only time will tell if I should thank or curse you...
@protheu5 Жыл бұрын
Now I want to (fruitlessly) think about degrees and geometrical possibilities too.
@chopthesheep905 ай бұрын
I'm digging the angle blocks that double as spacers! There are so many things these days that have become affordable for hobby people that make life a lot easier (CNC stuff, DROs, etc.), but sometimes those take a lot of the thinking out of it. Machining is a process. You seem to really get the idea man I dig it, thanks for the idea!
@smellslikeupdog806 ай бұрын
THat cutaway between you on the bus, and shower was very premium. It's a detail requires a little personal thought to be outside the machine shop, to match what you were saying in the post-recording. That's worth a subscribe:)
@JohnMazz Жыл бұрын
Let's collet a day.
@shoofle Жыл бұрын
love the heptagonal block! the hexagonal half-indexing is a neat trick, even though it doesn't preserve the vertical OR horizontal data.
@thezipcreator Жыл бұрын
I like this channel because (as a layman) I have no idea what any of the terms you're saying are but then you show a video of the thing and I'm like "oh ok makes sense"
@EitriBrokkr3 ай бұрын
You should make a collet block that just spins to whatever angle you want. Then put a gear behind it to index it precisely.🤣 But seriously, that's an awesome invention
@PaulSteMarieАй бұрын
How far do you trust the chamfers on your collet blocks? I wouldn't expect them to be ground true, or even inspected beyond cosmetics at the factory.
@MeriaDuck Жыл бұрын
Initial reaction before watching the video, heptagons are cursed 😂. At least I know you can't make them with ruler and compass.
@atalazs3 ай бұрын
how is the hexagon clamped with the tilted shim block? The vise would turn the block out of orientation, right? So you need at clamp from the top?
@NickAmes0 Жыл бұрын
Your line about "stacking up enough prime divisors" reminds me of the Newbould Indexer. It uses a stack of plates with partial face splines to index to any angle precisely. Each spline pair has an unusual spacing, such as 1.1° per tooth. (Since the splines aren't complete, they don't need to divide evenly into 360°.)
@Attoparsec Жыл бұрын
Oh, that's very cool!
@L0op Жыл бұрын
I haven't watched the video yet. I am 95% sure that you can not convince me that Hexagons aren't the Bestagons. Edit after watching: I will admit that in this specific case, the Heptagon is the Bettergon. But since this is undoubtedly an edge case, and the Heptagon needs assistance to be the Bettergon, I would be willing settle for calling it a Reallygoodagon.
@EJdoomsday Жыл бұрын
Excellent work man, earned my subscription
@desertTooHot Жыл бұрын
Nice. I should be using my collet blocks more...
@dennisclapp75272 ай бұрын
Thanks Atto
@fearlyenrage6 ай бұрын
well is that a 1mm runout at the center of your lathe?
@solarbirdyz Жыл бұрын
yay i finally know what a collet block is for!
@christopherbaker60518 ай бұрын
So will my r8 collets fit into this c5 collet block? I understand c5 threads outside, r8 thread inside…I’m very new to this stuff.
@Attoparsec8 ай бұрын
No, R8s are much narrower, so you'd need a special block for those. It could be done, though I'm not sure I've ever seen such a thing. Since R8 has threads on the inside, you can't pass stock all the way through like you can with a C5, so they have a much more restrictive diameter *and* depth they can hold. They're really just intended for holding tooling.
@tedstriker59913 ай бұрын
Fear and Loathing in Collet Blocks
@aguycalledlucas Жыл бұрын
Great video
@philcook996725 күн бұрын
Why not use a spin indexer?
@HM-sc4to Жыл бұрын
this was amazing
@jasonhull57129 ай бұрын
Wow. 🤯 that is deep. 🤔
@diegomartincavallo8491 Жыл бұрын
me suscribo saludos desde argentina
@eaglewolf404 Жыл бұрын
Nice
@Sarcasmarkus9 ай бұрын
I'd rather get a 1 5/16" hole saw, spade bit, forstner bit, boring head, fly cutter, or router bushing with hole template, sketch or scribe a circle and cut it with a scroll saw, jig saw, Sawzall, coping saw, jewel saw, than be trendy and buy a 3D printer, thats a lot of money i could spend on more machine parts, more tools, more tacos, tortas, sushi, sandwiches, hamburgers, whiskey or tequila, thats just me though.
@guloguloguy8 ай бұрын
THANK YOUI, FOR THIS VITAL, AND HELPFUL INFORMATION!!!.. YOU HAVE SOME AWE$OME TOOLING IDEA$ THERE!!!!!!!!!!! TRYING TO FIGURE OUT THESE KINDS OF DETAILS ID DIFFICULT, IF YOU DON'T WORK AS A PROFESSIONAL MACHINIST.