Tandem Tractors Working in The Field at Ferguson Days | Bukh, Ferguson & MF | DK Agri

Subscribe - goo.gl/TsjQiu
Facebook (Danish) - goo.gl/SeuzEF

[@ls_oldi_pics47]

Nice Tandem !

[@CrossfellRailwayVideos]

You see something new every day!

[@Ghis1964s]

Well.... it's the official "mating day" today anyway ;)

[@MrSnyper360]

The original FWD

[@nissanpatrol8950]

Isnt it 4wd tho?

[@gerthezsgerthezs213]

💯

[@donaldellis3609]

The man with the twin massey 65 seems to be struggling a bit.

[@torbenalstrup3902]

Yeah. It should actually be able to pull a 5 X 16 or even 18 incher without too much trouble. It may need more field weight on the front axle especially.

[@craigalston2208]

Have you ever seen any of the rare 3 tractors joined together as a high horse power puller before the major manufacturers started manufacturing big 4wd tractors ? Need to get some footage of those tractors doing some field work too .

[@iOWNaFERGUSON]

Nope. Where can i see that?

[@craigalston2208]

@@iOWNaFERGUSON john deere 830 triple farm tractor and the international 660 triple farm tractor

[@russellclement2058]

A mouldboard plough must be hard to pull because a MF 65 can pull a 4 furrow disc plough and a TE20 will pull a 2 furrow easy,,

[@SK-tr9ii]

It's pulling hard because the plow isn't set up right. I don't think those guys are farmers.

[@joescheller6680]

Apoears his lays are in need of replacing not going in ground very well. Maybe to dry also i guess

[@joescheller6680]

Remember when i was a kid dad would take the lays to a black smith he would form a point on the leading edge of the lays to help it penetrate hard soils.

[@corydriver7634]

Are these factory machines or are they two tractors fabricated together by the owners?

[@bigredc222]

They are homemade.

[@TKM1951]

If they are homemade ,I wonder why they are all matched Massey to Massey ,Ford to Ford I wonder is it gearing needs to be perfectly matched

[@craigalston2208]

@@TKM1951 yes the gearing does need to be matched plus it's easier to get parts from 1 manufacturer rather than 2 different manufacturers if something needs replacing and to synchronize 2 of the same engines compared to trying to synchronize let's say a Canadian built gas Massey Harris to British built diesel Field Marshall . FYI there are also a few guys out there who joined 3 tractors together .