iPad Air 2 Battery Replacement

A step by step Repair guide on how to repair and replace a not working/charging/swollen battery on the iPad Air 2 A1566 A1567 Models.
Compatible Replacement parts - bit.ly/3EmbtUx (USA/AU/Global)
Tools
Heat Mat bit.ly/3WgsPcF
Portable Heat Gun|Stations bit.ly/44Y5NLp
Philips Screwdriver, Tweezer, Suction Cups, Pry Tool Plastic / Metal / Card bit.ly/3FB2r5a
Silicone Repair Mat bit.ly/3FKUc6K
Glue | Adhesive bit.ly/3Dw2X4C
Clamps & Essentials bit.ly/3Qvm3Qf
Guides you May Like
iPad 8 2020 10.2 Battery Replacement • iPad 8 2020 10.2 Batte...
Oneplus 7 Battery Replacement • Oneplus 7 Battery Repl...
iPhone 12 Mini Battery Replacement • iPhone 12 Mini Battery...
Huawei P20 Pro Camera Lens Glass Replacement • Huawei P20 Pro Camera ...
If our video was helpful, you can always support (for $1.99) us by becoming a member. A Joining Member will help us to create more variety of content for the community.
KZbin Join bit.ly/3O7X5SH
Our Partners
bit.ly/2FSFTPv ( Gadgets & Accessory Store - Ships Worldwide)
bit.ly/2QRfYhP ( Phone & Tablet Replacement Parts - Ships Worldwide )
bit.ly/3afejcf ( Phone, Tablet Parts & Accessory Store in The UK )
Timestamps
00:00 Intro
00:10 Opening iPad Air 2
00:34 Removing LCD Assembly
01:45 Removing Not working Battery
03:51 Placing New Battery
06:25 Testing
06:40 Closing and Installing LCD Screen Assembly
music - eoun.com
#ipadair2 #Battery #ipadrepair

[@johnkozarevich3552]

I just successfully made this replacement. What you need to add is the 4 screws you need to remove are super micro small and you will need an incredibly small Philips screwdriver. Fortunately I had just ordered this special screwdriver. Apple wants to make it as difficult as possible to do the job yourself.

[@DIYGeardo]

Thanks for your feedback

[@1Cor13.4-7]

Congratulations!!! About how long did it take?

[@Plasmo20]

Far simpler than other guides I have watched. Just an observation on the voice, slow it down a bit so the words are clear and separate as we need to get the accent and the words. Having the subtitles is a smart move, as is the testing the screen method. A++++++. I now am ready to do mine. Thankyou. update: Cracked my screen, battery works though

[@DIYGeardo]

Thanks for pointing out mistakes/errors & improvements , we will work on it..Good luck with the repair..

[@Video2Web]

i cracked my screen too

[@ThisIsMyDiary43]

The slower you go the less likely you are to break your device it's not a race.

[@reyflowers]

Really eye opening. I'll be making this repair in the future.

[@antoniochiera7770]

Ciao, sei bravissimo. Buon 2023.

[@DIYGeardo]

Thanks 🙏

[@iandamianluciferwilson7385]

Worked for me following your instructions. Perfect thanks.

[@DIYGeardo]

Great to hear!

[@asianafia18]

How much does it cost to buy all the equipment lol

[@perceive8159]

Be careful with these models! If you crack this screen or lcd it’s an expensive fix on these iPads, you can replace the glass but you need the proper tools, actually the screen replacement is the most expensive out of all the iPads, the glass screen is glued onto lcd, they dropped that arrangement with the next generation iPads , the battery replacement is quite straight forward as you have shown and thanks foe sharing!

[@DIYGeardo]

Thanks for your feedback..value your inputs as well..

[@Stevieab]

Yeah I’ve just did that 😤 was very careful but now I’ve got grey lines on screen

[@attilaenergyracer]

Clear cut video, helpful. Will attempt this soon.

[@DIYGeardo]

Great..

[@user-ut4js2de8o]

Very good tutorial

[@DIYGeardo]

Thank you! Cheers!

[@imdyinginside1919]

Hi I wanted to know that is it ok to disconnect those cable (display cable) with out disconnect the display first? Like when I fixing my phone I always disconnect battery before I would do anything My iPhone board once broken because I didn’t disconnect the battery Thanks you.

[@DIYGeardo]

Well the issue is with most of the iPads are that there is no actual connector. So it is quite hard to unplug the battery. You can undo the battery holding screw. But it is not really helping ( what i think )

[@jgr971]

Hi...At how many degrees( C°) and how many minutes (mn) did you leave the iPad Air 2 on the heating mat in order to take off the screen? thanks you

[@DIYGeardo]

I would say starting with 80-100C for about 2-3 minutes around edges. After that with 60c with 1 minute intervals. Some devices can open easily and some are not..it takes time and needs patience..

[@jgr971]

@@DIYGeardo it's a blue heating mat like yours that I have...so it heats up all of a sudden.?

[@elledayrit3113]

Hi i just watched and subscribed your channel ...thanks

[@DIYGeardo]

Awesome! Thank you!

[@iDoctorUK]

Great, clear instructions. although a little misleading. the screen on this has been removed before you made this video.

[@DIYGeardo]

Thanks for the feedback.We have shorten the video in removal process.Now I think we should have kept that process too. Thanks

[@IDraganM]

May I ask what kind of glue did you use and would it be a problem when opening next time?

[@DIYGeardo]

we were using b7000/t7000 glue.They are easy to remove with some heating.

[@asdfhgjkl9]

Thanks for the straightforward tutorial, was really useful.

[@DIYGeardo]

Glad it was helpful!

[@adriaanschepel9001]

Hi. What glue did you say you were using to reattach the screen? Thanks.

[@DIYGeardo]

Precut double sided tape or b7000/t7000 glue

[@adriaanschepel9001]

Thanks. I managed to keep the original glue strip in good order, and just heated it up as I was reassembling. It has all stuck together well. Thanks for the video!

[@sali-ali]

@@adriaanschepel9001 If you drop it, the screen will come of and damage the flex cable. B7000 glues are very cheap like $2, $3 for 25ml. Don't use the original adhesive.

[@Lycenius]

So disappointed. It was a good video, but several suggestions could have been clearer, like how far in using the tool when separating the screen. What is "too far"? I found out, and DAMAGED the screen, making it unusable. I could have avoided that if I knew how far in that was. Like after the cover was removed you could have pointed out the width dimension of the adhesive all the way around. Also if you could have showed a close up view of "the pillar" would have helped to know what the battery connecting was coming up and over on.

[@ThisIsMyDiary43]

You could have easily made your screen bigger. I made sure to watch it on a TV. There is a reason why he uses a very thin plastic card so that that doesn't happen. If you've never replaced a battery before in any electronic device I wouldn't recommend starting with an apple product. I am blind af and saw just fine.

[@inkymark7655]

Thanks

[@DIYGeardo]

Welcome

[@DIYGeardo]

Welcome

[@1Cor13.4-7]

Thank you so much for this well done tutorial! My iPad won’t charge beyond 25%. So a battery change is in order. I got my new battery yesterday. I changed it today. How would I trouble shoot if it doesn’t power up after replacing the battery? Is it possible I got a dud battery?

[@DIYGeardo]

Always possible to get a bad battery. Check your connections, can you see anything on the screen?

[@1Cor13.4-7]

@@DIYGeardo No. the screen is black. It was working before changing the battery.

[@DIYGeardo]

@@1Cor13.4-7 did you seal the screen? Did you test the screen before closing the iPad?

[@1Cor13.4-7]

@@DIYGeardo I did not seal the screen. I tested it first.

[@GeeTrieste]

That battery connector is a bit hairy. Remove the screw, and the connector slides in, but the motherboard has to be lifted in order to get the connector in. And it appears to lift the motherboard, it has to be heat separated from the body partially.

[@DIYGeardo]

Thanks for your feedback

[@user-vk4mj9md2b]

Good

[@DIYGeardo]

Thanks

[@thirstylmao]

Hi, I want to ask that can I put an ipad 6 logic board into an ipad air 2? Thanks!!

[@DIYGeardo]

i haven't tried it..it looks the same, but i am not sure it will fit in properly..Because it is not only the logic board, you need to place parts too..so it might not work properly..But again i didn't try before,

[@thirstylmao]

@@DIYGeardo nevermind but thanks!

[@RS-eo7ij]

What type of glue do you use to hold the screen down?

[@DIYGeardo]

B7000 / t7000

[@clinten3131]

I gave up I dont fully understand what to do with the battery connection I tried to lift it op like shown and pull the battery out but it was stuck. Im gna pay to get it done I guess. Also lost a phillips screw in the process those are tiny. I got afraid to wreck the ipad.

[@alanrichardson2034]

I can’t hear the make of the glue you suggest, what is it please?

[@DIYGeardo]

B7000 / T7000

[@donhiggins5164]

You must have had that battery out before you shot the video. It came out way too easy

[@georgelam7614]

What is the temperature (hair dryer) to heat the screen

[@DIYGeardo]

80-100c is good..starts with 2 minutes on edges..then add as needed ..

[@patrickshore5859]

@@DIYGeardo ten minutes full blast !

[@dexterdelacruz2670]

My iPad shutdown after a couple of minutes even if it's at 90% charge, could it be a battery problem? i wish for your response soon as possible🥺

[@DIYGeardo]

Most of the time it can be a battery.but sometimes it can be the board.But first step can be a battery replacement.

[@jimholcomb4527]

Where can I get that adhesive tube you use?

[@DIYGeardo]

Where is your location?

[@jimholcomb4527]

@@DIYGeardo Baltimore Maryland

[@DIYGeardo]

@@jimholcomb4527 Sorry we cannot post due to aviation rules from the outside USA, you can try this place www.mobiledefenders.com/b7000-15ml-clear-adhesive.html

[@JK-wu2ti]

Bro where to buy the original ipad air2 battery from

[@DIYGeardo]

Where is your location

[@rai5314]

@@DIYGeardo India...

[@jazabakram7777]

Sir i visit your website delivery available for japan 🇯🇵?

[@DIYGeardo]

Yes we do, but batteries not possible

[@jazabakram7777]

@@DIYGeardo hmm but I need battery

[@DIYGeardo]

@@jazabakram7777 yeah i know, currently there are some restrictions from airlines..

[@jazabakram7777]

@@DIYGeardo ok thanks ❤️

[@abdullah-kr5ns]

مرحبا انا في سوريا عندي ايباد اير2 من اشحنه يخلص الشحن حوالي1ساعه او اقل وبطاريه لا يوجد في سوريا يوجد لاكن مستعمله من اجهزه اخرى هل تنصحني ان اشتري شاشه من خارج البلاد وكم سعرها الان

[@DIYGeardo]

Why do you need screen for the battery repair ? well it is quite hard to ship individual batteries now

[@abdullah-kr5ns]

@@DIYGeardo انا اشتريت بطاريه من خارج سوريا ركبها شخص فني صيانه واعطاني البطاريه القديمه كي ارميها في القمامه لاكن انا اخاف الرجل لم يبدل لي البطاريه واعطاني بطاريه مستعمله واخد مني الجديده كيف يمكن التاكد من ذالك هل يوجد طريقه كي اتاكد من البطاريه هيا الجديده ام مستعمله

[@Perplexer1]

Is it possible to buy original (OEM) batteries ? Or can I only buy third party batteries from eBay? I guess those are lower quality and don't last as long? Does anyone have more experience and can advise me?

[@DIYGeardo]

Well there are some good quality third parts batteries. i am not sure that you can buy original batteries.

[@panstar8860]

Whwrw i can buy orginal battery to ipad air 2?

[@DIYGeardo]

your location ?

[@panstar8860]

@@DIYGeardo Poland

[@kapitankapow]

Battery screw doesnt screw back in, any idea

[@DIYGeardo]

How did you remove?

[@kapitankapow]

unscrewed it@@DIYGeardo

[@wataboutya9310]

That looks much simpler than the Ifixit instructions which has 74 steps!

[@DIYGeardo]

Thanks for your feedback..

[@Rqaraal]

@@DIYGeardo do your have any idea how to fix a iPad Air 2 hom button? I tried r force restart and the aclcho method

[@DIYGeardo]

@@Rqaraal what is the issue? Stuck or not working?

[@Rqaraal]

@@DIYGeardo not working

[@Rqaraal]

@@DIYGeardo is it still fixable or like it needs to get repaired

[@Propertystockbusiness]

is this even possible to do with a hairdryer?

[@DIYGeardo]

Yes, but needs lot of patience..

[@Propertystockbusiness]

@@DIYGeardo Yes i got it done, it took much longer to heat up.

[@roganeadie7430]

How many minutes would be an estimate?

[@haranathadurty6076]

repairs to iPad Air2 apple available in Rajah mundry Andhrapradesh

[@DIYGeardo]

Sorry I’m not sure about that

[@md.akbarazam7989]

Brother

[@DIYGeardo]

Yes what can I do for you?

[@md.akbarazam7989]

Plzzz

[@DIYGeardo]

Yes what can I do for you?

[@md.akbarazam7989]

Help me

[@DIYGeardo]

Yes what can I do for you?

[@hennerfritz]

L

[@DIYGeardo]

Thanks

[@rozbitesklo6349]

OMG I don't undestand why you not use adhesive 0,25 - 0,3 mm for tutorial. Cheap glue B6000 look horrible and this glue use only amateurs. This application is not dust proof....

[@DIYGeardo]

Thanks for your feedback..if you are using adhesive, you should get pre-cut adhesive. Otherwise it is better use b7000. There are original b7000 glue which is great for devices. But again it comes to individual preferences..

[@rozbitesklo6349]

@@DIYGeardo B7000 is not good adhesive. Include resolvent. And stick is not dust proof. After some time this glue have degradation :X And Glass must be 0,3mm over frame. Wjen is down have different shepe :X Construct adhesives are better. But must be proffesional not cheap Chinese production....

[@chris425amp7]

I didn't see no glue just on the new batteries had adhesive tape. Got my Son a Air 2 64G when they came out i got it now but the batteries are still fine an stull get good usage time.

[@darrenanderson5260]

wtf is this guy on speed talk how ridiculous most folk will have no clue what he’s saying so am skipping

[@DIYGeardo]

Please follow the timestamps, or you can enable the CC for the Script. Thanks

[@darrenanderson5260]

@@DIYGeardo think am just going to take to shop as I think I would break it lol