IPAD Photobooth DIY

Check out how I make my IPad Photobooth

[@elenacurcio7438]

This is one of the most creative solutions i've seen - it looks great!!!

[@lavishlifedjs]

Thanks Elena…It looks great and professional too…get lots of compliments

[@Dashdiva]

What size circle is that, mines a 18 inch ring light from neewer I want to add the plexiglass mirror…should I get the 18 or smaller I want it fit snug jus like that

[@slimhim]

This is awesome! Thanks for sharing! How do you attach the ring light to the Rockville totem?

[@lavishlifedjs]

Thanks. I put the ring light on its stand then insert the stand in the little hole on the top plate of the Rockville totem…then I angle the stand towards the back of the totem in the bottom…check out the other videos I believe I demonstrated the aforementioned actions

[@BetaDenDymonds]

This awesome, exactly what I had in mind. Where did you get the Rockville stand from? I would also need to find someone to do the cuts for me, do you have any suggestions?

[@lavishlifedjs]

I got them over 2 years ago on Amazon. Not sure how available they are these days…Rockville Totem Moving Head Light Stand+Black+White Scrims+Carry Bags (RTP32W) www.amazon.com/dp/B07JBLLBNJ/ref=cm_sw_r_cp_api_glt_fabc_SCX98ZRK03TY2CS58NKG Also, they can make the cuts for you at Home Depot just give them your dimensions

[@BetaDenDymonds]

@@lavishlifedjs thank you

[@ladysha9552]

Nice. What did you use to get the cuts? What type of tool, knife,ezto razor? Thanks

[@ladysha9552]

Also where did you get the spandex material and how it is attached to the board? Fabric glue?

[@ladysha9552]

Also how do you get it nestled securely in the white holder from your previous video?

[@lavishlifedjs]

Thanks…www.homedepot.com/p/Wiss-10-in-HD-Tradesmen-Shop-Shears-CW10TM/313487663?MERCH=REC-_-pip_sem_mobile-_-313485219-_-313487663-_-N

[@lavishlifedjs]

@@ladysha9552 the spandex I got from Joann Fabrics…attached with fabric glue and gaff tape

[@lavishlifedjs]

@@ladysha9552 I cut the board so that there was a little resistance

[@BrittanyLabrador]

Do you have the link to that LED light you put at the bottom of the stand?

[@lavishlifedjs]

www.idjnow.com/ape-labs-coin.html Price has gone up since I bought it…you would also need to purchase a external battery

[@pee_dot_scott]

Thanks for this video.

[@lavishlifedjs]

No doubt homie

[@londonblu2620]

thank you!

[@lavishlifedjs]

Your welcome 👍🏾

[@Hawddawg]

You dont need to have the ipad plugged in and charged?

[@lavishlifedjs]

Yes…there is a cable inside that run through this set up behind the scrim

[@KickingitwithKish]

Aren't you afraid someone bumps it and the iPad falls out?

[@lavishlifedjs]

It’s really secured…both front and back especially with the back section

[@KickingitwithKish]

@@lavishlifedjs this is a really smart idea. I'm considering doing it also.

[@andijoseph]

Can you lock the app so that they can close the app and access anything else?

[@detlefmogl1770]

yup. guided access in settings

[@renay1291]

Does the Ipad Overheat being so enclosed? imagine in an outside sunny event?

[@lavishlifedjs]

I’ve never experience that but apple products are notorious for that…had macbooks overheated several times on me

[@renay1291]

@@lavishlifedjs Ty i will try this.

[@donnadanso403]

What size ring light you used

[@lavishlifedjs]

This guy…Neewer 20-inch LED Ring Light Kit... www.amazon.com/dp/B07KWYH27B?ref=ppx_pop_mob_ap_share Don’t forget to sub !

[@1973djmarc]

Still waiting for totems to come in they are on back order

[@lavishlifedjs]

Damn…seems like a lot of stuff on back order these days…you tried the other version with the photography stand ?

[@mzjlloyd]

What is the dimension of the insert

[@lavishlifedjs]

Not exactly sure…just used the space as a guide and went to town

[@Dashdiva]

I’m still trying to figure how to do this…

[@lavishlifedjs]

Did you get it ?

[@Dashdiva]

@@lavishlifedjs couldn’t find anyone to cut the board so we end up doing something different

[@JordanRingPhotography]

What’s the name of the Photobooth app?

[@lavishlifedjs]

Simple Booth classic