Volvo Engine Oil Change Overview 3.2L NA and 3.0L turbo engines XC90, XC60, V60, S60, V70, XC70

Рет қаралды 12,918

Күн бұрын

Пікірлер: 19

@pgreenx Жыл бұрын

For a beginner video, I would’ve included at least a comment about torquing the drain bolt and filter to spec so the beginners don’t overtighten it

@robusti82 Жыл бұрын

Thank you for the P3 XC70 content!

@Bobalini1 9 ай бұрын

Oil filter doesnt have room in front of manifold on 2012 XC70, ended up removing the cap and flipping the lis around to change the filter in the space under the manifold 😅

@RockstarBruski 3 ай бұрын

great video thanks very much for making it. The only things I would add is to avoid over tightening the oil pan drain bolt I'd recommend that after people finger tighten then use a torque wrench to tighten the oil pan drain bolt to torque specifications. For example my 2010 XC60 3.2l engine oil pan drain bolt torque spec is 28ftlbs which can be found on the internet or in a service manual. Also I think that the oil cap filter on my 2010 Volvo xc60 has a torque specification of 20ftlbs. Also, after I removed the oil filter cap the plastic top of my old oil filter actually stuck inside the top of the filter cap! I only noticed that happened because when I looked at the old oil filter it was missing the top plastic that is supposed to be attached to the filter element on the top and bottom sides. I was able to use a pic tool to remove the plastic filter piece out of the top of the filter housing cap.

@StuEvans Жыл бұрын

My Volvo's never play nice after unless you reset the oil life monitor and level monitors.

@legambaz Жыл бұрын

Great to se you back making videos Chris. You aught to make more as i really enjoy all your videos. Just a quick questions, my tech usually use a vacuum tank to suck up old oil from the dipstick hole instead of draining them from the bottom. Can you tell me a little bit about the good and bad between the 2 ways?

@IPDTheVolvoSpecialists Жыл бұрын

We have never experienced that method. Our best guess would be your mechanic wants to make sure everything is getting pulled from the oil pan so nothing is mixed or contaminated when doing a new oil change. Thank you for the nice comments.

@pgreenx Жыл бұрын

My 3.2 non turbo owners manual shows 7.2 quarts. Any reason why the diff?

@zmanvideo1 Жыл бұрын

thank you for the great video!!

@lailaata2542 7 ай бұрын

thanks

@IPDTheVolvoSpecialists 7 ай бұрын

No problem

@tedrichardsondrummer 5 ай бұрын

What do use to keep the engine bay so clean?

@IPDTheVolvoSpecialists 5 ай бұрын

We usually use an air hose. Chris is pretty meticulous when it comes to our project cars and engine bays. Wiping it down by hand is normally what he does. Thank you for noticing.

@AHZAZOU 10 ай бұрын

does all T6 Engines needs 7.8 Q , mine on manual says less than that , S60 2011 T6 ?

@IPDTheVolvoSpecialists 10 ай бұрын

It ranges from 7.2 and up. Once you check the dipstick, you more likely will add ore once the filter housing is drained completely.

@MichaelTabak 2 ай бұрын

I have a 2013 Volvo XC70 3.2 l engine. I'm a retired mechanic and no matter how you manipulate the power steering reservoir there's no way to get the oil filter cap out to clean it or to get the new O-ring on their. So you have to put the O-ring on while the oil filter cap is inside the motor area and that is one pain in the butt, because you have to get two hands down in there to do it this is one of the most stupidest designs.