iPhone 11 Battery Health 100%

iPhone 11 How to Up Battery Health using JC V1S
and JC Battery Cable., From Battery Health 87% to 100% Battery Health..

[@hacker-dy6iy]

hi bro If you put the old battery flat on the new battery and connect the jc to the new battery, it wouldn't give an important error and the battery health would show 100?

[@campuswithshaddy]

How to check if the battery was boosted?

[@gtm1880]

I bought qianli icopy v2.2, when i connect the battery repair board to program the battery, i notice the following : The battery board detects the battery on all iphone models i tested (8+, XR) and I am able to change the battery capacity and percentage from qianli (both from machine and PC). So for instance if i program the iPhone XR battery capacity from 70% to 90%, qianli does it with by successfully write message, I can confirm this by removing and re-connecting the battery to the connector board, and qianli reads and shows the battery capacity with new updated changed capacity as 90% on its display screen. However, when I insert the battery back and connect the phone, it shows the same old 70% "Service" status in the maximum capacity. I tried doing many power cycle (discharging and fully charging) my phone many times, also tried installing IOS operating system several times but it still shows the old battery capacity. It looks like in the new ios releases Apple did something so that the ios reports only the old battery capacity even after someone changes it. Any solution to this?

[@jessdoal]

need new battery or can use old one? thanks in advance

[@mufaddalibrahim2787]

Thanx bro very helpful video 👍😊

[@Televisionev]

Bro by this machine can i restore face id pronlem aur battery warning ?

[@gerrit9106]

I did the same for my phone. Have had it working for 2 months now and my battery capacity has already dropped to 91%, why is this happening so fast? Is this normal?

[@AliMuhammadSyahbana-zn6hf]

Bro is it show in 3utools 100% or old battery status ?

[@chinaphonefixteam6300]

JC V1S Battery Repair Board and JC Battery repair flex cable for iPhone 11-13 Pro Max Battery Data Read Write Progamming to remove Health Warnning Error.

[@Heimdall2050]

So this is the battery boost unofficial sellers says with old iphone second hand and still 100% battery health

[@ElectroCarpintero]

You need to transplant the BMS from the original battery to the new non-genuine one. This video only shows the use of the JC flex to update the percentage of health. By the way good video.

[@vivienjuraske6896]

When my iphone have 75% and i turn it on to 100 % .... is it then real 100 % again or just fake percent showing ? and its still 75 % ?

[@amansingh-uo9wr]

Brother jcid v1se ko activate kasa kra 🤔

[@jmrepairguide2105]

How about replace battery you need to put jc cable for new battery

[@techjhunadventure3806]

yes bro need

[@farinxfarinx]

Bro you are the best I checked a lot of video, and your's is the best with a result of 100%. Thanks you very much.

[@techjhunadventure3806]

thanks bro

[@ammarker6832]

I had my ip 11pm battery replacement with a aftermarket battery(non genuine) and of cuz there is no battery health...with this cable flex and jc program..will it get my ip battery health show again ?

[@rostik3091]

Nope

[@ElectroCarpintero]

You need to transplant the BMS from the original battery to the new non-genuine one. This video only shows the use of the JC flex to update the percentage of health. By the way good video.

[@cryptograph-btcbitcointime7627]

So the point of this is that it will show 100% with the old batterry? :) or am I missing something :D

[@techjhunadventure3806]

yes sir

[@muchammadchizban6783]

the solution when the battery will be activated it says "no repair cable detection" even though I have used flex on cable

[@kodeysazali9885]

yeah , do u find solution , mine too

[@gl3305]

Here as well

[@gerrit9106]

Is it possible with iOS16?

[@nazer3406]

Is flex cable necessary ?

[@techjhunadventure3806]

yes bro

[@CARIAIR]

I have a problem every time I soldered the cell to the new battery it no longer works could you help me with a tip!!! I've been watching the video more than 100 times I'm interested in learning, but even so the original flex burns I need help please !!!!!!!

[@techjhunadventure3806]

buy battery welding tools, its better to use.!

[@CARIAIR]

@@techjhunadventure3806 what tool and video do you recommend friend please

[@DarkAtlas97]

Hi, should the jc battery cable be installed for ever? i mean, isn't it only to restore battery health? and then you can remove it and use it for another device? or do i need one jc battery cable for every battery replacement

[@techjhunadventure3806]

no bro., when you installed the jc cable, it is permanent there., another battery ., another jc batt cable.. 1 battery , 1 jc cable

[@aaronlee1803]

I think the jc cable can be removed after battery health 100%

[@Beast_Son_Gohan]

No you can't if you remove the JC cable it will return to the status like before

[@gerrit9106]

@@Beast_Son_Gohan sure?

[@gsmwestland2388]

@@gerrit9106 yes for sure.

[@aasasriyah6000]

Masih Simple i2c

[@zmieyhq3546]

What is the software name sir?

[@techjhunadventure3806]

Jc V1s

[@jessietuazon6740]

gdpm,sir anong name mo sa fb at saan location mo?

[@Kerug78]

how about new battery with 100Bh , Need Change Ic tx

[@techjhunadventure3806]

what do you mean by that

[@Kerug78]

@@techjhunadventure3806 replace battery sir, iphone 11 need Flex socet Baterai ? for BH 100

[@techjhunadventure3806]

yes even you change

[@lulslime1066]

Both of you need to learn English

[@DiegoGonzalez-eo4hs]

I have a problem connecting the battery with the flex my iphone turns on but it starts at 0% battery and it did not appear that it is charging and the condition of the battery does not mark it and if I remove the jcid flex the iphone works perfectly I already tried with two flexors and in two different iphone 11 and it does the same thing to me that I will be doing wrong in the jcid v1s if it lets me program well and activate the battery plis helme

[@techjhunadventure3806]

check another jc id battery cable bro.,

[@uguriletisim1055]

what is the name of the liquid

[@randooopik5019]

isopropanol

[@igadgetplayboy6705]

How much is the price of jc cable?

[@techjhunadventure3806]

send me in my fb page

[@nasrunas0]

I can't activate the battery

[@techjhunadventure3806]

check the version of your jc software and version of your jc cable bro

[@nek123]

A old Battery is an old Battery. I you lika a better Feeling write 150% in the Batterycapacity ….

[@Rizwan.bluewings]

Wow Great Very Easy

[@harshbareja5259]

It’s available

[@harshbareja5259]

Jc our Qianli ka flex alag alag hau

[@harshbareja5259]

Hai..

[@kunalMobileKing3004]

Battery health 95% karni ho to wo bhi ho jati hai ya 100% hi hogi

[@techjhunadventure3806]

yes bro

[@mahamatabakar6742]

Hi

[@techjhunadventure3806]

hi bro

[@dahacksterkent8169]

Rewriting the board does not make the battery new? am i missing something here? or is this a tutorial on how to cheat people?

[@markaffleck4622]

It is

[@techjhunadventure3806]

this is example when you change battery.. even new battery you change and you need to put this jc cable., even new battery

[@lukmonlag3807]

100% health and 462 cycles charge times - BRAVO!!!! TRAGEDY MAN....

[@techjhunadventure3806]

You can make it 0times also the cycles bro.! or any times you want, edit in cycle !

[@Justin-nx1ht]

This doesn't work

[@techjhunadventure3806]

maybe you dont know how to do it., yes of course it will not work if you dont know how.,✌️

[@farinxfarinx]

I tested it's work at 100%

[@gerrit9106]

Is it possible with iOS16?

[@wanex6920]

Plz don't cheat iPhone Battey health🥺

[@techjhunadventure3806]

why will i., if you have mobile send it to me i will do same like that

[@wanex6920]

@@techjhunadventure3806 In our country all these iPhones are sold to increase battery health which within a few days of purchase all battery health decreases.

[@techjhunadventure3806]

in your case because you are selling ., we need to change new battery ., but same procedure also need to put jc batt cable

[@wanex6920]

@@techjhunadventure3806 How long after this battery health increase all will be reduced

[@techjhunadventure3806]

if change new battery it will be normal as., and it will take a year before decrease., same as you buy new iphone..

[@stafdewulf5646]

Great skilled video. I have messaged you on facebook

[@techjhunadventure3806]

thanks

[@nazer3406]

Can i have your FB! Want to know about XR procedure

[@techjhunadventure3806]

same acc

[@AliMuhammadSyahbana-zn6hf]

Bro is it show in 3utools 100% or old battery status ?