🔧iPhone 11 Glass Replacement - Restoration guide 4K 🖥

[@raylafleur6616]

How you managed to take off that cable with a metal pry tool without tearing it, I'll never know.

[@krantikoganti]

Music is annoying. But, thanks for the video

[@abdullahzahit2142]

Hey bro heat degre seperator ?

[@matthewJamesKendell]

Would you say separate Lamination and Vacuum machines are better than the 2 in 1 machines or is there no difference?

[@jakbrat-m]

Ładnie się rozwijasz Jerry, tak trzymać !!

[@RafalBielawski]

Ah ten Podlaski profesjonalizm, takim normalnie dłutem jechać ramkę korpusu, brawo! Nie dziwie się ze dziurawej baterii nie zauważyłeś :)

[@teshanekanayaka4883]

Your job ❤️

[@ThePowerr7]

Rafał co się czepiasz. Przecież nie robisz refabrykacji. 🤣

[@DoktorGSM]

Good job my friend. Keep going

[@JerryMobilePL]

Thanks 😁

[@Nagyez_on_youtube]

@@JerryMobilePL​​⁠​⁠​⁠what is the name of the liquid substance 8:04

[@richardmateo2005]

Hi, great job. What was the name of the tool you used to remove the dust at 10:05?

[@plangh]

Where is the new water and dust shield?

[@alekprimo3193]

Amazing job thank you learn things 😚 curious what equipment you use if you don’t mind sharing

[@lucas_ndm5757]

Dobrze widzę ze dolną część ramki zostawiasz przed wycinaniem ? Mam właśnie problem z usunięciem dolnej części ramki bo łatwo uszkodzić wyświetlacz .

[@humbertomejiasantos6621]

Hi, How long it takes for you to refurbish the glass in normal (not fast-fowarded) time. Thank you.

[@erikeduardo8676]

depends on the technician's experience, 1 hour is a good time

[@sloopycat1954]

Hi Jerry and guests, can someone please tell me if it's possible to replace a glass like Jerry just did and do a Good job without all machines Jerry used, I simply cannot afford to buy a perfect iPhone at the moment, a job and money is scarce so I was thinking of buying a damaged cheaper iPhone and hopefully repairing it, I'm quite desperate for a phone and if it was possible to replace a glass as Jerry did that would be amazing. Any tips or advice would be really appreciated, thankyou in advance, great repair and great video thankyou very much.

[@hxllside]

I wouldn't recommend it. I am trying to learn this and I broke the screen on my first attempt while trying to get the frame off. Why not get a cheap knock off replacement screen? You will have slightly less saturated colors and you will get the "important display message" every time you start your phone, but it will work perfectly fine

[@sloopycat1954]

@Marty Mc De Thankyou so much for your kind advice, I agree it looks difficult and no doubt something can easily go wrong as there so fragile, I wouldn't dream of it normally but it just comes down to having very little money at the moment. Did you manage to nip it in the bud eventually or did you not bother trying to do another fix your self, it would be brilliant if there was a way to practice etc, thanks again.

[@dt17490]

Yep…guess I’m living with my scratched screen 😂

[@Madhuvarasan__]

Price

[@damjanovicr1195]

bro how come your screen didnt damage when you took the frame off like that? i did the same thing and when i tried to turn it on it showed a black screen and malfunction in both bottom corners as i broke the frame there.

[@hry0649]

sorry for the inconvenience! Hello! I have a question what is the difference between classic glue with goose and uv lamp compared to glue with laminate machine? thanks

[@erikeduardo8676]

A clean, safe and professional job with oca glue

[@kenmangas8429]

Is there a way to make the glass from curved to flat as my screen glass is damaged and if i want to change it would be nice if its flat like 12 and 13?

[@b.r.xgames125]

Witaj . Mam pytanie da sie kupic do 11 te elementy 2:38? I od czego one sa?

[@solarp1guy]

Is that first machine you out the svreen in a press? And the second one a uv activator?

[@erikeduardo8676]

Second machine is a debubbler. It is basically a pressurized chamber.

[@mgomez5606]

Is it cheaper to buy a new second hand screen?

[@JerryMobilePL]

Wouldn't be cheaper. And if You replace a whole screen will be a "not original parts" message. And TrueTone bye bye

[@mgomez5606]

@JerryMobilePL for me I don't care about true tone and the notification disappears. How much do you charge?

[@ultrarepairs6918]

Hi how hot is the plate?

[@JerryMobilePL]

It's 100⁰C 😉

[@matthewJamesKendell]

is it true to say that the thinner the lcd cutting wire, the less chance of damaging the touch layer during separation?

[@erikeduardo8676]

That's right, a good temperature also helps

[@plangh]

Where was the glass broken? I don't see a crack.

[@diyfixtool830]

This maintenance video sharing is very detailed and very helpful to me. thank you for your sharing.

[@BahaAuto]

what was that you used to clean the LCD?

[@erikeduardo8676]

isopropyl alcohol

[@ABFMobile]

Please wath is the diameter of wire ?

[@erikeduardo8676]

0.05mm o 0.04mm is fine for ips screens

[@dudmen100]

Jest chłop dobry ‼️‼️

[@hxllside]

I have a question: Does this process sometimes work without the Autoclave/ Defoamer? Or are there always lots of bubbles? Thank you for the video :)

[@simplerick323]

You can use just the glass and liquid loca glue

[@annawiniar-xo8tx]

Jaki koszt ?i dlaczego tak drogo?😂

[@dalebassett6119]

This iphone 11 glass replacement is harder than doing the iphone 13 pro/pro max and 14 series purely because you have to remove the frame from the glass before glass seperation so becareful if you attempt this repair

[@matthewJamesKendell]

Hello, can tou just confirm what temperature you set the heat plan to when sepatating the glass woth the wire? Thanks

[@JerryMobilePL]

Hi 😁 90⁰C

[@matthewJamesKendell]

Hello thank you for your replies 😁Ive practiced removing the glass on some old iPhone 11 screens. Each time I seem to damage the LCD despite cutting it perfectly with the wire. Could I be damaging the LCD flex at the bottom when I remove the metal frame? I see you didn't remove it in the video until 7:41. Is it better to remove it later when its more pliable? Thanks

[@ridu9976]

@@matthewJamesKendelldo you leave the heat on while cutting with wire? How you cut pass the touch flex cable without tearing it?

[@matthewJamesKendell]

@@ridu9976 Yes you have to leave the heat on. I find around 80 deg works for me. You need to make sure you get the wire beneath the touch layer to start with otherwise you will be removing the touch layer aswell.

[@ridu9976]

@@matthewJamesKendell how you mange to cut past the touch flex cable without ripping it? Thanks for the answer

[@matthewJamesKendell]

Hi, very nice job. What is the machine you use at 10:50?

[@JerryMobilePL]

This is vacuum laminator machine 😁 model vl-800

[@logiicc7318]

Will the face id work?

[@JerryMobilePL]

Of course yes 😉

[@kasiak.1029]

Very nice 💖

[@icristian6707]

Is this doable without those machines?

[@krakowiaczek1939]

Yes, but really dont do that.

[@icristian6707]

@@krakowiaczek1939 yes looks like it

[@TurboBass]

Is this missing the adhesive seal around the bezel for ingress protection? Absolutely haram!

[@Coopzzz360]

The top layer of oca on XR and 11 is awful

[@olivermathiasen3594]

Cool video. But u think i just stick to Buying new screen. But can u tell me how u make money doing this?

[@kamildwa9163]

czy da rade go zrobic klejem LOCA?

[@JerryMobilePL]

11 nie 😕 11 pro i pro max owszem

[@kamildwa9163]

@@JerryMobilePL dzięki. a dlaczego i skąd mogę wiedzieć kiedy użyć loca a kiedy już jest potrzebny sprzęt do regeneracji?

[@JerryMobilePL]

Generalnie każdy ekran da się zrobić na LOCA, lecz w przypadku ekranów lcd, tft, ips (czyli wszystkich oprócz oled) trzeba odklejać podświetlanie z tyłu wyświetlacza ponieważ loca narobi na nich plam. Mając sprzęt do regeneracji jest łatwiej i czyściej 😁

[@kamildwa9163]

i wszystko jasne. dzięki za odpowiedź i pomoc. Powodzenia :D

[@kamildwa9163]

a jeszcze mam pytanie, przy wymianie całego ekranu, jak pozbywasz się komunikatu o zmienionym wyświetlaczu? wiem, że można przelutowac czip z oryginalnego wyświetlacza, jeśli to też robicie, można liczyć na filmik? :p

[@rajpurohitofficial4223]

Thank you sir

[@munsurahmed906]

Hello do u have Mail in service please I want u to repair my iPhone 11 glass

[@Mahmudjon_official]

WTF

[@AmanAli-wr3tt]

Fantastic job !!

[@plangh]

So many errors. 😞

[@nomenestomen8952]

my god is that complicated....:-(

[@riamobilehopital3867]