iPhone 15 Pro Max Spigen Tempered Glas.tR EZ Fit Screen Protector! EASILY THE BEST!

[@craigbrotko2016]

I read a tip years ago when putting on screen protectors do it on bathroom sink top. First close door and run hot water shower for several minutes. this adds a little moisture to the air that will drop any dust particles in the air.

[@AlmostLastJedi]

This works, I’ve done it for years.

[@TheChronoTiger]

This man's vibe makes applying a screen protector a damn fun activity

[@rutger1101]

These things are the best. I’ve started to use these after my 12 Pro Max had scratches after just a couple of weeks use. Used them on my 13 and 14 Pro Max and hopefully soon on my 15 Pro Max. Only messed up once when I missed a dust particle, but luckily you get 2 of them in the package. I always make sure I have the Spigen EZ Fit and a case at hand when I unbox my new iPhone.

[@mdduckman]

I agree - been using these since my iPhone 12 Pro Max. I used to be terrified of putting on screen protectors but these Spigen ones are so easy to use, just like you showed in the video. The fact you get two in each package is a huge bonus! Well done video!

[@phillewee]

is there to applying kit for each glass ? cause i dont really get how to apply the 2nd one if there is two

[@tgchavi6012]

@@phillewee cant speak for the Iphone 15 one since I havent got mine yet but for the Iphone 13 my spigen glass protectors came with an alignment tray for each glass. (its already pre assembled with adhesive that you have to peel so its not like you can put any screen protector in the alignment tray and reuse it)

[@phillewee]

@@tgchavi6012 just orderd 2 pack yesterday. thanks for the answer though. Tried put on another glas without assemble kit and wasnt satisfied enough so..

[@danielsimon4678]

@@phillewee if you order a 2-pack, both come with the kit to apply. Done mine first, then my brother's. Super ez, no other kit comes close.

[@tonkisa127]

​@@philleweewhere did you order it? What site, i cant find it

[@jamms2966]

@TechnicallyTee PRO-TIP: Use a misting spray bottle to mist the air in the room with water. It will drop all the dust particles out so they don't land on your screen right before applying your protector.

[@melvinsacromentoe]

Didn’t know this!

[@tejaspanicker1881]

Would a humidifier work lol

[@nasseralsharif]

That’s actually really genius! I did know a tip also, someone said his grandfather father advised him to put a screen protector inside a hot bathroom, where there’s no dust at all.

[@Joseph-32]

I apply these in the bathroom. I turn on the hot water in the shower and let the steam clear the particles floating in the air. Seems to work for me!

[@jamms2966]

@@Joseph-32 That technique sounds great - gonna give it a shot next time. Thank you!

[@stevenraustin]

I go to the smallest bathroom in my house. Turn the water on as hot as it can get in shower. Let the steam fill the room and apply the protector. The steam removes all dust from the air.

[@who_else_but_dee2821]

That really works ?

[@stevenraustin]

It most certainly does.

[@JeraldJamesCapao]

How about the humidity?

[@stevenraustin]

@@JeraldJamesCapao Never had an issue. I have been doing it this way for a long time. New phones yearly and we do break a protector here and there. It was the easiest way I found for those annoying rogue dust particles I seem to get under the glass more often than I liked.

[@funkam0nkey]

Only screen protector I use. Very easy to fit and clean install every single time.

[@Papicc1no]

Real

[@danielsimon4678]

I installed my first protector yesterday, it was this for iphone 14 pro. This is the way.

[@tonkisa127]

Where can I order it? Been searching for it but just cant find it

[@funkam0nkey]

@@tonkisa127 Amazon. I’m in the UK but it should be available in most countries.

[@Ahm3d1]

​@@tonkisa127ali express

[@RickyKennedy01]

Use these every year, but struggling this year. Tried the ESR ones, and these Spigen ones however they don’t go quite to the edges as much as I’d like so you can see the screen from the edges and slight rainbow effect here too. The ESR have black edges so cut away some of the screen. I guess the slimmer bezels and curved screen edges have made things a little more difficult this year.

[@JacobAU]

Hands down the best screen protector on the market I always go with this model it’s never failed me

[@jameswilson6351]

I used this brand starting with the iPhone XS Max and every phone since and would have agreed with you until I got my protectors for the iPhone 15 Pro Max. I have maybe messed up 2 protectors in 5 years of using these. Well since both my wife and got the same phone and I actually plan to keep mine for years I bought 4 packages of these. 3 had dust in the screen protector in the package. 3 feel off the installation tray taking the backing off the protector. 1 installed and didn't have dust but the right edge would simply NOT stay down. 1 is actually installed and so far seems fine on my wife's phone. I use the method where I run the hot shower with the fan on and the door closed before opening any of the stuff. Then follow all the cleaning instructions. Never had issues with this method but this batch of these protectors have been terrible.

[@marioarty]

I’m on my 5th one. This year is just horrible

[@GoufinAround_]

I've been using these for years. Only once did I need to use the second protector in the pack and that was because I screwed up the installation by not reading the instructions. No issues with clarity and after I read the instructions it was perfect. I've used them on soon to be my 4th iphone when I get my 15 pro max in november

[@tgchavi6012]

Went through 2 of these on my Iphone 13. It has never failed me and everyone I've recommended it to has told me It has saved their phone at least once. Takes drops without a problem as long as you have a case on, pretty scratch resistant as well.

[@williambuzan463]

You're the right guy to learn this from. One quick swipe after setting the frame over the phone is enough before waiting 30 seconds. You use the squeegee the right way to. I watched another guy who ended up with a bunch of little bubbles and that fool was trying to use the corner of the squeegee. He had a mess but his video is still up!

[@edmondloo1975]

I just got my iPhone 15 Pro Max! Blue colour 256GB and I love it. I have my case on, matte tampered glass on and lastly a full covered tampered glass for my camera lens too!! And I’m loving it!! Fully protected!! 🥰

[@Mishal.13]

You can never go wrong with a Spigen screen protector. I’ve been using them for years and can never fault them.

[@DonCovin]

I love these. Installing screen protectors in the past used to be so stressful

[@iz5442]

The best, ever since they released this series. I’ve been using it, saved me from multiple drops and potential cracks. Ez to install and come in 2! Slightly expensive but worth every dollar.

[@Brian-Burke]

Thanks for this video. It helped me do my 16 Pro. I also wore latex gloves just to make sure I didn't touch it with my bare hands accidentally.

[@canyonblue737-8]

THE BEST. I've used this for the last 3 generations of iPhone (including 15 Pro today) and it is the ONLY one I've ever used that installs perfectly every, single time... with no real skill required other than making sure the screen is clean and dust free before starting.

[@arijitfrens2006]

hi, planning to purchase this for my 15 pro but wont he front camera and dynamic island get blocked? like if i take a selfie will it be a problem?

[@AzzurroWolf]

A tad disappointed in Spigen this year. Alignment is definitely off, 1-2mm, doesn't cover equally around the screen and I get screen bleed from the top. Shame as they are usually spot on.

[@TechnicallyTee]

Looks fine to me and I’ve already installed 3 of these.

[@whosthisguythinkheis]

@@TechnicallyTeewhat do you mean? They barely cover the display this year. Are you using it on the 15PM or the smaller 15s?

[@v3xxdd753]

This screen protector this year is so bad… idk if the first launch batch but the edges refuse to fully adhere getting bubbles that come and go. Then there is something wrong with the adhesive on the edges picking up excessive lint. I though I was crazy until people on Reddit and forums said the same

[@CodyKloepfer]

First thing I did after unboxing my 15 Pro today, install this screen protector. Smooth and painless install. Love it

[@arijitfrens2006]

hi, planning to purchase this for my 15 pro but wont he front camera and dynamic island get blocked? like if i take a selfie will it be a problem?

[@CodyKloepfer]

@@arijitfrens2006 They’re covered but no issues at all. Face ID works, camera works.

[@AR919]

​@@CodyKloepferHi, does the screen protector come with black lines over the borders which might disturb the display a bit? Just now got my phone wanted make sure before getting the protector

[@CodyKloepfer]

@@AR919 No borders. Full display adhesive.

[@ThatCho]

I have been TERRIFIED of installing these myself for years. This is hands down the easiest installation ever. I will forever be a fan. Hopefully the strength is decent enough as well, but at the affordable price point, I wouldn't even mind needing to install extras. lol

[@clementte6948]

just installed mine right now. very easy. and the screen seems very bright

[@charlesrary5320]

These Spigen screen protectors are great! I have had one on my iPhone 13 Pro for about a year and a half now with no issues. I like the new design on the squeegees!

[@justdave7529]

Best screen protector hands down. Simple dummy proof install and case friendly. I have the two pack ready to go. Now I just need the 15 Pro Max for them 🙄 Got an email last week that it’s shipped to my carrier retail store, should be here next week 🤞🏼🤞🏼

[@arijitfrens2006]

hi, planning to purchase this for my 15 pro but wont he front camera and dynamic island get blocked? like if i take a selfie will it be a problem?

[@preauxbleu1579]

I’ve been using this screen protector since iPhone X. It’s reliable and super easy.

[@JDW-]

Enjoy your videos very much, but you made no mention of the Spigen glass edges. Photos I've seen of the Spigen glass show it is clear around the edges, and in my experience that always lets light hit the edges, making the protector more noticeable. Other protectors like TORRAS Diamond Shield have blackened edges to prevent that. As such, I think you should compare the Spigen to the TORRAS, especially because both come with easy install trays.

[@spicyposh671]

The room around the screen is a bit too big for my liking. And the edges appear to be sharper than they used to be. Super easy to install, but not 100% happy this time.

[@PRshik]

I have the same thing Despite the fact that PRO MAX versions 12-14 did not have such sharp edges, they appeared only in version 15 PM

[@zl0di]

Literally the best screen protector money can buy. I use this every year on every new iPhone

[@Marcstang04]

These Spigen screen protectors are great, had it on my 13 Pro Max now on my 14 Pro Max. I wish they made them for curved screens, I would love to put one on my S23 Ultra.

[@armen7932]

Got ‘em but think I’m going with the Benks Glass first.

[@Akenrec]

Let me know how the benks is. Interested to hear how it fits the curved bezel.

[@armen7932]

@@Akenrec I sure can.

[@afifsalim5533]

3:05 "oh sheeeeett i contradict what i just said" lol

[@younkilee2794]

This time, I decided to try the Torras Diamond Shield for iPhone 15 Pro, and gotta say, the installation process was a breeze. You should definitely give this one a try!

[@jameswilson6351]

How is that working for you with a case? Or do you not use a case?

[@younkilee2794]

@@jameswilson6351 I do use a case! I found myself switching between Mous Limitless 5.0 Aramid Carbon Fiber and Spigen Zero One (Black) case. So far, it's working really well for me!

[@jameswilson6351]

Strange KZbin tells me there are two replies to this original comment but only shows me mine. I did order this protector yesterday. It just came. I would say it was even easier to install than the Spigen, looks awesome, and it IS working fine with my Otterbox Figura case and when I first popped it in my Quad Lock case the top right corner bubbled up a bit :( but when I pushed that back down it stayed down. I cannot speak for other cases and I don't know how it will hold up because I just got it. LOL

[@younkilee2794]

@@jameswilson6351 Nice! Glad that it's working well for you :) I have a love/hate relationship with otterbox cases hahaha

[@olgamarkova3980]

Thank you for this video! Easy to understand, easy to repeat!

[@burtmachine]

For me it does not stick on the sides and top. Like there is a border of 1mm lose adhesive. Tried other brands as well and all have the same problem. Now I used Whitestone dome glass with liquid adhesive and that one does stick over the whole screenprotector. But installing is a pain.

[@burtmachine]

@@MPQHD7 try Whitestone dome, very much worth it! The installation is hard but it looks very nice!

[@mkg514]

Just applied the glas tr ex fit screen protector on my iPhone 15 pro max. Thanks for the recommendation! Very easy to do and nice screen responsiveness. Doesn’t seem to collect fingerprints like other ones I’ve tried.

[@KuroAshiyaSanji]

Does it cover the edges too?

[@syazwanhjsufri448]

@@KuroAshiyaSanji This, id like to know too

[@KuroAshiyaSanji]

@@syazwanhjsufri448 I've seen a review with pictures on reddit about this screen protector and in the photo it doesn't really fully cover the edges, but the Torras Protector was the only one which was covering properly.

[@croxpeg]

I can see a big gap between the edge of the screen and the screen protector edge. I also noticed a lot of negative reviews of Spigen Screen protector (only iphone 15), stating that there's a pretty big gap. Is that a problem?

[@TheOnlyElev8]

He probably won’t reply he got paid to make this video

[@croxpeg]

@@TheOnlyElev8 Fair enough. I ended up buying ESR screen guards. Would definitely recommend that over the spigen ones for iPhone 15 base model.

[@pear-zq1uj]

i just installed mine and it only covers the touch screen, not the tiny bezels on the side

[@ginodavis]

How about the second screen protector? Is it having a separate installation frame and cleaning kit?

[@bartoszri]

Which case is better? B ? Spigen? Puro or genuine Apple ? White/transparent. For Ip16+

[@poebellie4990]

You are an angel! While unboxing I was like what is this? But thnx to you it is in my phone richt!

[@KK-gt8ld]

Too bad the quality of Spigen screen protectors has gone down hill. I went through two of these EZ fit trays and two replacements (since Spigen concluded the previous ones I used were defective) and NONE of the screen protectors adhered properly. They would always rise up on the tops and sides. And this was happening without a phone case on! After frustration and sheer curiosity, I bought a two pack of Magic John screen protectors and I got a flawless installation the very first time. No I’m not getting paid to say this either. Lol. So shout out to Magic John screen protectors. They’re the real deal! No joke!

[@phillipbaker1950]

Been watchin’ and shopping and now I am done. Ordering right now. Very quick, concise, and an experienced user. Sold. Thank you!

[@Az1nk3]

Is it smooth and anti fingerprint?

[@ts-cj2ym]

I always got a dust or two under and then we have a unremoveable bubble :(

[@diegob6729]

Are the borders sharp? Especially at the bottom when swiping up?

[@Alex-tu5vu]

How does it feel when swiping from the edge? Don't you feel the little gap in the edges?

[@reddog6256]

Thank you. Best instruction video

[@krmtdfrg]

Bro, I finally gave in and upgraded to the 15 Pro Max and had to throw this screen protector on it. Rocking the Spigen Ultra Hybrid Zero One case for now.

[@Mrwillyface69]

Spigen ez fit or Belkin ultraglass 2 ?

[@Mr.ErikSnake]

The best iPhone screen protector period 💯👌🏼

[@mustafahakimi3532]

But the screen protector doesn't cover the edge so you're going to feel that edge everytime you swipe up to unlock the phone or go to the home screen.

[@TechnicallyTee]

You don’t feel it at all. If you use a case it’s just fine and I’d honestly fine if you don’t use a case.

[@SimplyxJackiehh]

Literally the best and they last so long!! Much more durable than most on Amazon ( I used to go through screen protectors every other month). Now I change them every 6-8 months on 13 Pro Max

[@Blueshirt2023]

Some protectors doesn’t cover the vessels! Dust get stuck on the sides! Can u suggest any brand that covers the vessels also? For ip 15 pro max

[@Erica-et4ye]

I didn’t order this brand…but it was the first time I ordered a screen protector w/ the guide. It really made the application much easier.

[@viijan28]

Tee, does this one have black borders or pure clear glass protector? Great video!

[@alphaandliarize]

I only use Smart Devil TG because their application tool includes dust removal. You still have to wipe it, just to make sure but man 2 seconds installation can't beat that.

[@billyswatstyle]

Thanks for putting me on to the spigen screen protector. It’s my go to for my device now.

[@damianscott71]

Just fitted one to my 15 Pro and I’m quite disappointed. There’s a 2mm gap around the edge of the screen (to accommodate the slight curve of the iPhone screen), and it causes a weird rainbow sparkle effect around the edge of the screen. I’m sending it back to Amazon. Meh.

[@Propan-Bhutan]

Does it cut corners of screen like others? I have it at home but dont want to be dissapointed

[@melanieb1442]

I had a Belkin screen protector applied to my iPhone 15 pro max at my local Apple store. Everything seemed fine until I was using my phone in my car while wearing sunglasses. I noticed a super obvious greenish tint. In fact, it was making people with paler skin tones look like their skin tone was actually green. Anyone else notice this issue with the Belkin screen protectors from Apple or other screen protectors in general? My old screen protector on my old iPhone never did this. I’m not totally sure which brand it was, but I think it was made by Zagg and it was purchased from Best Buy years ago.

[@HisMajesty99]

The edges of the screen protector didn’t stick to the phone properly. Was disappointing

[@JensMüller33]

Stick it one majesty

[@deceptDOTorg]

Nice tutorial: straight to the point. Cheers from France 💃🏼🇫🇷

[@iamGermaican]

This was my go to. They changed the design and of the two packs that I purchased (four in total), three of them wouldn’t adhere to the screen properly.

[@GolfNaples]

Awesome video! Thank you!

[@igorm.3054]

The best review! Thank you bro! Take care the best!

[@victuringan1429]

This is also my go to screen protector since 11 Pro!

[@manny108]

Best screen protector around. My go to.

[@sapo588]

should i use the wipes and dust sticker if I install it right from the box?

[@rmorenberg]

I've always paid to have mine installed but after watching your video and the fact I have moved into the middle of no where I am going to have to install it myself. thanks for the video

[@stevek4449]

at 4:23 what was not mentioned should have been "...as you set the screen protector down press until it CLICKS into place like a case" botched first install as a result. after seeing your video i got this case for my iPhone 15 Pro Max BECAUSE IT HAD 2 CASES LOL. I had a feeling about the first one going bad! Anyway after fighting the last bubbles and getting the second aligned spot on compared to the first one I got 99.99$ correct but one teeny spec by the charging port edge that's barely noticeable on the white screen bar or line you swipe with. Otherwise well done.

[@shezanjimenez]

I have one bubble will it go away?

[@welphereiam]

Usually these are great but dust and debris are sticking to the border of mine like crazyyyyy. The outline of my screen protector has so much lint stuck to it...

[@Phaios95]

Do I have to worry that the metal frame of the phone gets scratched during istallation?

[@brandontiek]

Got my Spiegen front glass and the camera bump glass on too!

[@jbjb971]

Does it cover the ear piece microphone at the top? Or where is the earpiece microphone on the 15 pro models I can’t even see it on 15 models I have a 12 pro max and I can see it

[@kevvy22]

How does it feel when you swipe left or right caseless? I’m thinking of the back swipe gesture. Doesn’t your finger nick it every time?

[@allyshan7]

agreed I literally return my ESR screen protector to get spigen the process is simple

[@badoobada]

Does it affect the camera I mean like does it give u a bad quality

[@julianpawlata]

AMEN, im doing the same as you or in reverse you do the same as, I started using them with my iPhone SE 1 gen. and it was money well spend now spine protect's all of my family member screen's

[@mrnegronis]

It is important to show the ease of use when installing but I was also hoping you would have gone into more detail about the shatter and scratch resistance compared to other screen protectors

[@Andy-xd7ng]

i watched your video last year and i switched to the spigen for the 14 PM after i didnt install the zagg one i got perfectly in the center so it didnt work with the cases i had…. the only thing is is that the zagg one has better texture but doesnt come with an install tray…. i got the spigen for my 15 PM thou this year before it arrived so i could install it right after removing the white sticker…. the install frame is key to get the edges perfect for cases….. can you make another video putting on cases??? Im not sure this year how this screen protector will work with the smaller bezels of the 15 pros….. thanks!

[@AB-bb5cz]

Will it fit iPhone 15 as well ??

[@AE-dq5bb]

Does this have black frame around or is this clear?

[@kalafalas246]

Do you have any issues with polarized sun glasses? My screen protector is all rainbow with mine :( regular sunglasses are fine

[@DroneManMurphy]

It’s the best but their mold must have been just slightly too big because the install cage fit mine loose and my protector installed a little crooked. I can live with it.

[@GlockUser1982]

Just got this phone about two weeks ago I will try this to see how it works

[@Vicky-ci2fk]

This is having a lot of issue with alignment. I had a bad experience and when I checked lot of people facing the same on Amazon.

[@JensMüller33]

Align it

[@TheDunkerz13]

The way you talk makes me subscribe to your channel, I love it man. Peace

[@COYS1-zw8or]

Thanks for the helpful video so with that ez fit tray can we adjust it after laying it on the phone before pressing and sliding the sticker bit or does it stick to the phone as soon as it touches it?

[@ok_computer12]

You held my hand and walked me through this! Its perfect thank you 😁

[@danalausch4516]

Super easy install! I am glad I found this channel!

[@ELJefeReviews]

Forgot to pick up a screen protector. Just used that link to cop! Thanks for the reminder bro.💪🏽

[@antonioau_gb89]

Can u review their Align master too Struggle to choose between Ez fit or Align master

[@arupmazumder1155]

Hey can use Spigen glass tr Ez fit screen protector of 14 pro max for 15 pro max.Beacause at my nearby they still haven't got the 15 pro max screen protector

[@gimax4689]

I have read somewhere that a tempered glass is supposed to shatter at the time of a drop impact to absorb the force away from the actual screen. Does this one shatter as well? What do you guys think ? Thanks!

[@saakha11]

Mine just chipped near the edge 😢 think the screen is still fine tho. Will have to get another screen protector now. Perhaps something other than Spigen this time…

[@Khandakerkhalid418]

Can we use this in iPhone 15

[@chronictown4330]

I’ve had three of these in one year, the tempered glass hasn’t come through for me. Easy install though.

[@davidbuchholz6527]

I usually go for a black border screen protector cause it seems to hide it more. Torn between this and a black border one. Is it hidden well? Or do you get screen bleed?

[@JensMüller33]

Nga

[@ellisonabdallah828]

Why not use FloLab’s screen protectors tho?