Buy Direct with more color options! 👉🛒bit.ly/2TfbVeK Visit the JabberTech iPhone 16 Pro Max Store! 👉🛒amzn.to/4efuMyJ Buy on Amazon 👉MagStand: amzn.to/3Bzb1nC 👉Unicorn Beetle Pro: amzn.to/3NbKzD2 👉Unicrom Beetle Mag Grip: amzn.to/3XNX50p 👉Mag XT: amzn.to/3Y8opYl More Case Reviews for the iPhone 16 pro Max Otterbox: kzbin.info/www/bejne/rIOWpqxmbMh_p6M Spigen: kzbin.info/www/bejne/p2quh4qEm9mAp6s BENKS: kzbin.info/www/bejne/f6O1lIGlo8-Jqrc Mous: kzbin.info/www/bejne/l6rHfHqepr5mbs0 Andar Leather Case: kzbin.info/www/bejne/mJTNZKSZqbWfgqc
@itzsabbage383027 күн бұрын
The UB grip is the way protective without being too bulky has magsafe with a kickstand camera control button and usb c cover for like $25 can’t really beat it for the price
@grahamevans856711 күн бұрын
I just purchased the ub mag grip & it looks so good! Feel more confident now after watching your review! Of course here in Australia it cost between $50-$80!!! So expensive like everything else atm but worth it to protect my phone. Thx for the review! 🙏
@pac3293 ай бұрын
can you please make a video on how the mujjo leather case aged?
@Trojan03042 ай бұрын
Go Grip case, nice grip, real camera control, extra protection for motherboard, extra corners cushions, really strong mega, ring stand nice for long photo sessions . First got case with metal camera cover but kept forgetting to open cover, too much hassle when in hurry to take photos.😂
@muddy19447 күн бұрын
For the money Supcase is second to none.
@TheJabberTech7 күн бұрын
Agree
@carlosrivera8756Ай бұрын
Wish the mag grip case had the lense cover like the magxt lol but I’m getting the magxt
@iMustPandaLean2 ай бұрын
How much heavier is the Grip case over the Stand case? I went with the Mag Stand cause I thought the UBGrip would be too heavy. I just ordered it and I’m getting a pro max. Thanks for any feedback 😎🤗
@TheJabberTech2 ай бұрын
It’s heavier but nothing crazy
@iMustPandaLean2 ай бұрын
@@TheJabberTech okay thank you 👍🏾 I might double back and get the UBGrip, I’ll see how I like the Stand case first 😃
@yoga77883 ай бұрын
hi great video, question: does the mag grip case of the year have a cut out for a lanyard ? thanks
@TheJabberTech3 ай бұрын
yes it does
@joefriday6324Ай бұрын
Do the 'side' serations have a 'rubbery' grip... or are they hard plastic sides?
@Brownienterprises3 ай бұрын
What magesafe grip is that? The one you keep sticking on the back please? I need one.
@TheJabberTech3 ай бұрын
amzn.to/3Y1V6Wt
@Brownienterprises3 ай бұрын
@@TheJabberTech my man!!! Thank you!
@sporthaas16 күн бұрын
Spigen and Supcase must maken a baby together.
@BMDakota_3 ай бұрын
Have you reviewed the Hybrid T from Spigen? Also a great case with a camera control button built into the case.
@TheJabberTech3 ай бұрын
Saw that case
@juanpa53333 ай бұрын
Great video! I was wondering: do you think the pins may scratch the camera control over time? Are the pins brushed/polished to avoid any scratch or marks?
@JoeNasr1232 ай бұрын
The button is made of sapphire crystal, its very hard to scratch.
@呂布-3179Ай бұрын
@@JoeNasr123 我有買一個 透明黑支架的 他那個相機按鈕 不會刮傷相機按鍵嗎
@BMDakota_3 ай бұрын
My only gripe with Supcase, and this is a very small detail that won’t bother most… but they did even cutouts for Microphone/Speaker on the bottom, even though the cutout holes on the phone itself are not identical.
@JoeNasr1232 ай бұрын
See I actually really like that on my older cases, I prefer the symmetry.
@JoeNasr1232 ай бұрын
I would like to know whether you think the inside of the hinge where it touches the back of the phone could possibly hurt the glass from repeated hinge movements.
@TheJabberTech2 ай бұрын
Where does the hinge touch the phone lol
@garvbatra72 ай бұрын
On the Mag grip case it looks like the mag stand/ring's hinge kinda touches the back glass of the iPhone but i guess its kinda equalled with the back transparent plastic, please clarify @@TheJabberTech if possible 🙏.
@TheJabberTech2 ай бұрын
It does not. That would be a terrible and cheap design if a hinge touches the phone. Watch the video again
@garvbatra72 ай бұрын
@@TheJabberTech yup thought the same and after reading this comment I looked at the video really carefully then only asked you to just clarify it , thanks a lot 👍
@izzyc.47463 ай бұрын
That cut out is very uncomfortable to hold I have the otterbox and I don’t like it
@jacobhood78135 күн бұрын
Dude i have 16 pro max with a otter box & I sat on a wood bench with my phone in my right pocket and my phone cracked where the camera control button button is 😢
@coolspot183 ай бұрын
Will the Supcase Slim Ring Case work with a Magsafe / Qi2 car mount? Will the ring pop out easily?
@TheJabberTech3 ай бұрын
Should be fine. I show the strength in the vid
@BrandonsTechChannel3 ай бұрын
I’m rocking the ub mag stand smoke on my black titanium 16 pro. It’s honestly the best case to own.
@Itsahilali3 ай бұрын
Is the magnet on the back strong enough to hold the phone on the fridge magnetically?
@BrandonsTechChannel3 ай бұрын
@@Itsahilali it pulls but doesn’t stick like some other cases
@BrandonsTechChannel3 ай бұрын
@@Itsahilali actually it does! I didn’t slap it on the right area on my fridge and it does!
@Itsahilali3 ай бұрын
@@BrandonsTechChannel niiice this was what I wanted to know bc I feel like even though I wouldn’t use that option every day it’s nice to have
@maryperez61672 ай бұрын
I really loved the UB Grip one, but i’m worried about that tiny top metal area that is in contact with the iPhone directly on the back crystal. Would you please tell me if that metal area makes scratches on the iPhone back crystal?? It is safe to use it? Thanks!
@TheJabberTech2 ай бұрын
I know it's Halloween but this isn't a skeleton case 👻
@maryperez61672 ай бұрын
@@TheJabberTech don’t get it 😕
@tr4nsientsАй бұрын
I have faint permanent marks on the camera button because of it, although the metal should be softer than the “sapphire” glass used. Supcase sent me a free replacement and commented nothing else. I will probably avoid this metal button design in the future.
@itzsabbage383027 күн бұрын
The metal corner is only on the outside of the case the inside is a tpu material