Great, thank you so much!! Found a $17 screen on ebay and with your tutorial, I was back up a running a week after my dog chewed my screen. Took about 1.25hrs to fix, but I didn't bother with the water proofing and taping, well, because my cheap kit didn't have any of that. Thanks!!
@dendys0411 ай бұрын
you should install the seal because dirt will find its way inside and thats not good
@yotoprules936110 ай бұрын
Alternatively you can use b7000 which is what I use, and keep it clamped for a while until the glue dries @@dendys04
@joshypeepoo2 жыл бұрын
Thanks man! This tutorial was perfect! Quick and straight to the point! Fixed my phone in about 2 hours without issues! (I did lose one screw)
@TheLASOproject2 жыл бұрын
I always lose a screw 😂😂
@yotoprules936110 ай бұрын
I wouldn't worry about 1 screw haha. They're absolutely tiny
@selophane43Ай бұрын
Wow!! I cant believe i actually did it. ALTHOUGH… i did get confused at the part where you said “Unless you have an oem/refurbished screen, skip to 3:54”. If anyone has an aftermarket screen, do NOT jump to 3:54. Stay on task and remove that metal plate from the stock screen and place it on the new aftermarket screen. Boom.
@formicroscopyuseonly3 жыл бұрын
You saved me $90. Thank you. Even if i dont watch another video im subbed just so i can like your content as it comes through. Thanks again
@Pooy014 жыл бұрын
Very basic and simple video which made the job very easy for me. 10/10
@TropicalMint808 Жыл бұрын
aloha from hawaii, my kids found a smashed 2022 SE at the park and now $25 later and we are up and running 😂
@bprofxp4 жыл бұрын
Does it show a prompt similar to the iphone 11 when u replace the original screen with a third party display?
@RealWorldReview4 жыл бұрын
Yes, but it goes away after a week or 2
@yotoprules936110 ай бұрын
No prompt
@roger39582 жыл бұрын
Just fixed my screen again for 2x. Thanks again for this video! Took about 1hr this time instead of the 1.25. I'm getting faster. LOL
@ReadTheBible83 жыл бұрын
Excellent video. Good speaking voice, no obnoxious music. Just subscribed. Thanks.
@juanpastor1631 Жыл бұрын
hi ... Do you have tutorial for battery replacement? I check others tutorials and I rather follow you because your explanations are very clear.
@daniilpavlov88954 жыл бұрын
Hello, great video! I’ve got one question: can i repair se 2020 screen by changing it to iphone 8 screen? And also program true tone on iphone 8 screen from se 2020 screen?
@RealWorldReview4 жыл бұрын
Yes you can
@C.Dynamo3 жыл бұрын
@@RealWorldReview *how much money would that cost to change an iPhone SE from the black display to a white bezel display? 🤷🏻♂️*
3 жыл бұрын
@@C.Dynamo A display assembly costs less than $25 shipped. But the home button color is unchanged if you want to keep TouchID -- only the original button supports TouchID. Also, aftermarket displays don't support TrueTone unless you also have access to the original display AND own a reprogrammer (but 1. any half decent shop should be able to lend you a programmer, or do it for you, and 2. truetone is useless imo)
@magnusdahlgren37155 күн бұрын
This video helped me replace my broken screen and saved me about US$100, which is about the markup that a local shop charges.
@RealWorldReview5 күн бұрын
Crazy. I charge $80 total
@palwashaaakhan54002 ай бұрын
Thank you sooo much for your video- I have changed my daughter's phone screen with this tutorial and it works again! Although I was able to figure it out- I wish you'd mentioned in the video that some of the screws would be of different lengths and to take note of it while removing them- but otherwise fantastic!!!
@deap6914 жыл бұрын
omg you motivated me to think that my phone is completely broken but i don't think so
@RealWorldReview4 жыл бұрын
?
@deap6914 жыл бұрын
sorry he has mistranslated thank you for your help love :)))))))
@jalf1997 Жыл бұрын
Hi! Does true tone work after replacing the screen? I’m thinking on buying the yodoith screen kit. What do you think?
@yotoprules936110 ай бұрын
You will need a JC programmer to keep true tone.
@iwanlewis22614 жыл бұрын
Hello, I recently did this but didn’t put any tape on, my screen is noticeably unresponsive a lot of the time when typing, (for example this took twice as long to type as I needed to press the keys down for longer for the display to recognise I was touching the keys) and I have a hard time trying to swipe the control panel up, it seems like the bottom quarter of my screen is much worse than the rest, can someone explain this? I’ve heard something about grounding but im not sure what that us exactly?
@RealWorldReview4 жыл бұрын
That's the grounding issue. The kapton tape should fix that issue.
@jamesdodds31952 ай бұрын
Thank you. I was able to use this to replace my daughters screen. I did have one problem though. The metal bracket that screws down over the battery, screen and home button connectors was somehow causing the screen to become unresponsive. My guess is it was jarring the connectors under it when screwed down. After trying a couple times to reseat the connectors with no luck I just removed that bracket and reseated the connectors. Then I sealed the phone back up and it works perfectly.
@tonykavanagh78029 ай бұрын
Just fixed my Sons phone following your video. Fantastic content and great to follow 👍
@foster58313 жыл бұрын
Where do you guys buys y’all’s Screens?
@jontineisescurry520 Жыл бұрын
Amazon
@kilkim59233 жыл бұрын
Hey Matt, the screen is black after install, did I not connect the display plug correctly?
@VPC3 жыл бұрын
Yeah that would be my first guess
@chiwingwu1478 Жыл бұрын
can I reuse the metal panel @3:13 from the original? Buying a new screen has the option of including the metal panel or not.
@58924324 жыл бұрын
Hello ! Do you know where i can buy the display and ser Of there delivery yo others countries?
@Reykokuna4 ай бұрын
I assume that as with other models below this one, so series 7 and below, the home button no longer works properly and you need to enable the on-screen sensor, right?
@nfsbirlan22154 жыл бұрын
How much cost would it be in rupees
@safelysound3 жыл бұрын
@allo gloves lmao fr 🧝🏻♂️
@malloryflagg54737 ай бұрын
Thank you for this video! It made it simple and easy to follow! What a breeze! Thank you!
@voip4life9 күн бұрын
This video did help me replace my screen. Thank you!
@Accountoffline595 Жыл бұрын
I found my little brother phone that he hid because he broke it the whole front screen is falling off the phone. What do I do
@1234nikster4 жыл бұрын
Just out of curiosity, would you be able to swap the screen with a white iPhone 8 screen?
@RealWorldReview4 жыл бұрын
Yes, but the home button. Will stay black
@gasnoboof3 жыл бұрын
@@RealWorldReview what do you mean by this
@RealWorldReview3 жыл бұрын
If you change the home button, it will not work. If you use a JC or HX button replacement, home button will work but TouchID will not
@Prithedivine4 жыл бұрын
Do you need to use the tape? What exactly does it do?
@RealWorldReview4 жыл бұрын
Yes, it prevents grounding which can cause the touch to not work properly. This only applies to aftermarket screens (you should be fine without the tape with OEM, FOG, or In-Cell screens)
@user-lj4zw1rv9i4 жыл бұрын
What is the kapton for?
@RealWorldReview4 жыл бұрын
To prevent touch issues with aftermarket displays
@kaleewiley1658 Жыл бұрын
I'm having difficulties getting one of the screws out. It's the above the home button. I used all the small screwdrivers I have, and it still won't come out. Do you have any suggestions?
@andrzejgrad89702 жыл бұрын
Do you need to glue new screen?
@Travagast2 жыл бұрын
Can you update the link for a screen you recommend buying? The current one is unavailable and when I search amazon I see mixed reviews.
@markusray31910 ай бұрын
If I have a screen from another phone then I don’t have to mess with home button or anything just disconnect screen then put the other on right?
@RealWorldReview10 ай бұрын
Your home button will not work. It's paired to your phone and no other phone. So even with an original screen you will need to transfer the home button
@charlesalbrecht62013 жыл бұрын
Late watcher but love the video and am extremely thankful! I’ve seen on newer phones technicians reprogram or “clone” the old screen to the new using a specific programming tool. Do I need to do that for an SE screen replacement?
@RealWorldReview3 жыл бұрын
Yes and no. The programmer is only for true tone and auto brightness. If you dont use those, then you dont need it
@blackflames92054 жыл бұрын
my new iphone 8 replacement screen for my se wont turn on, i only connected the wires to test it first might you know the problem?
@RealWorldReview4 жыл бұрын
Might be a defective display. Also you might need to plug in the charger to turn on the phone.
@dmoney9029 ай бұрын
What’s the tape for
@arkieologist2 жыл бұрын
Will my screen work without the Kapton tape? Or will it be all screwy? My screen fix kit does not come with any Kapton tape, double sided, or that lovely blue layer you mentioned helps water resistance.
@yotoprules936110 ай бұрын
My screen didn't even have the removable shield, but regardless I left the red protective film on and it's working just fine, with a cheap aftermarket screen. The quality is reasonable, you can tell the colours are more dull compared the original but otherwise it's ok.
@zacharypawlowski39692 жыл бұрын
Thanks for video, I am getting a constant tapping sound when recording video after I replaced screen, have you heard of this and a possible fix? I tried restarting, software update, and turning off cellular/Bluetooth. It doesn’t tap if recording audio only.
@ahmedyousof62885 ай бұрын
How necessary would you say the adhesive at 4:54 is?
@RealWorldReview5 ай бұрын
Not the end of the world. Your phone is not water resistant and this will not bring that back 100%. It does help hold the screen down, but if most of the adhesive is still stuck on the phone, replacing this isn't required, just recommended. If you're a business replacing a customers screen, then you need to do this.
@ahmedyousof62885 ай бұрын
@@RealWorldReviewhow about the kapton tape? I watched another video of the same repair and he didn’t use any.
@RealWorldReview5 ай бұрын
@@ahmedyousof6288 if you have a bad aftermarket you'll need it to prevent grounding
@vpleeuk4 жыл бұрын
did it lose true tone function after replacement? mine lost and I dont know how to fix it
@RealWorldReview4 жыл бұрын
If you don't program it, then true tone won't work. Personally I'm not a fan of the yellowing of the screen that feature does.
@tedmosby75834 жыл бұрын
Real World Review And how do you program it?
@RealWorldReview4 жыл бұрын
With something like this amzn.to/36iBEvd
@CJMiller-x3x29 күн бұрын
hey could you help me fix my iphone se that a friend of mine had and broke it badly
@jaro.f2 жыл бұрын
is force touch activated if you put on an iphone 8 screen as you did or does it clash with the software?
@RealWorldReview2 жыл бұрын
No it doesn’t work
@soniafranco6716Ай бұрын
Thankssss
@letterr21723 жыл бұрын
so i have a black sccern so do i replace it
@awdii58462 жыл бұрын
Thank you for making it easy!! I really thought I was going mess up.
@gazzaboy25319772 жыл бұрын
What’s the tape for guys??
@yourdanlaylani24393 жыл бұрын
Is the kapton tape is a must for aftermarket screens and any aftermarket iphone 8 screen will work
@costalopes100010 ай бұрын
Olá, a tela do iPhone 8 funciona no iPhone SE 2022?
@MrMag1197 ай бұрын
@@costalopes1000o criador do vídeo usou a tela do iPhone 8 mas o true tone e brilho automático tem que ser reprogramados para funcionar. Isso é com tudas as telas pelo que entendi
@kashyapvishnudas14662 жыл бұрын
Can we only change the touch part like not display or is it a complete fixed unit
@RealWorldReview2 жыл бұрын
It's a $30 part lol. Just change the entire display so you don't cause other issues.
@kos-tik Жыл бұрын
Thank you for the easy and clear video. Took me good 1 hour to replace the screen. Too bad Apple makes it inpossible to replace parts without losing the iPhone options like in this case True Tone.
@Spawsy_ Жыл бұрын
Is the touchid works??
@RealWorldReview Жыл бұрын
Yep
@yotoprules936110 ай бұрын
@Spawsy_ so long as you keep original home button, yes it will. You cannot use touch id with another home button, it has the be the original (linked to logic board)
@real.innerfire2 жыл бұрын
When I am putting a refubricated glass, should I use any glue? Because you are not putting there any. Also does everything work correctly after replacing, even truetone etc.?
@RealWorldReview2 жыл бұрын
I recommend using the screen adhesive if there is some, like what the phone comes with. Don’t use glue/super glue! True Tone and auto brightness don’t work (generally) if you don’t program the new screen with a programmer.
@rinestone21233 жыл бұрын
for the heat would a hairdryer work for the heat
@RealWorldReview3 жыл бұрын
Maybe because he isn't really needed
@jngamingj43422 жыл бұрын
I have a question do your iPhone reset after you changed your screen? I hope you understand me because my english is bad.
@yotoprules936110 ай бұрын
It will not reset the phone, you can use it like before, except you will lose true tone functionality unless you use a JC programmer
@pepspam38922 жыл бұрын
Is necessary icopy to do this replament?
@yotoprules936110 ай бұрын
Not needed. You will not lose any functionality or get any warnings.
@saulmorajr48114 жыл бұрын
Question I just got my iPhone se screen replaced but for some odd reason my phone is very laggy now and it’s getting hot something it didn’t do before wat could it be I was told he changed my screen and some sort of censer could it be bc of the censor?
@cheezeboyz25493 жыл бұрын
YES that’s a bad screen get a new one
@saulmorajr48113 жыл бұрын
@@cheezeboyz2549 update still have it got my money back and kept the shitty screen since I called them out and almost got them fired since they didn’t even use the right screen ._.
@mimi-vm1tz10 ай бұрын
started at 7:08 pm ended (?) at 12:44 am reason ? i accidentally stripped two screws and struggled for 3 hours. i kept losing the teeny tiny screws and i currebtly have lost two also question, whenever i plug in the camera it somehow starts being hot ? why is that ?
@turbosuperchargedandnon-ts18424 жыл бұрын
Since you have removed the the black stick thing on the phone and replace it with that blue like transparent plastic, can it still resist water..?
@RealWorldReview4 жыл бұрын
I doubt it.
@turbosuperchargedandnon-ts18424 жыл бұрын
Thanks
@Jamorant122227 ай бұрын
how much would this cost to get done professionally
@RealWorldReview7 ай бұрын
60-100
@techguy9023 Жыл бұрын
If a iphone is dropped and it’s screen doesn’t break a ribbon cable might become dislodged. I have slight brightness on the screen but no picture. I haven’t tried opening it yet but I think that it might have a loose connection. It still makes sounds when connected to the charger. If dropped a couple of feet to the floor.
@samuelkosina38109 ай бұрын
how did u figure it out ?
@gabee70422 жыл бұрын
Ive change the screen but still won’t turn on do you think it may be a battery issue?
@AllinOne-zy7cj2 жыл бұрын
Bhai apka kya name h
@AllinOne-zy7cj2 жыл бұрын
And bhai aap apna se sell kr rhey ho kya
@yotoprules936110 ай бұрын
Try a USB tester to see if it takes power and charges. It should charge at around 5v 2A I believe
@serdohtoo11312 жыл бұрын
Will it still work if you accidently snap the black strips
@RealWorldReview2 жыл бұрын
Lol no
@jngamingj43422 жыл бұрын
If your homebutten is broken, can your touch id work when its New?
@yotoprules936110 ай бұрын
Impossible to get touchid without sending it to apple.
@panickedshears Жыл бұрын
This video is great. Too bad I’m a clumsy idiot. I was repairing the phone, did everything perfectly. No complications putting on the screen or taking out the Touch ID. I plugged in the flex cables and went to test the screen, plugged in the phone to the charger, and when I turned to grab something, my foot got caught on the charger and ripped the phone off the desk. Two of the flex cables snapped. I have to buy another new screen now.
@braq9775 Жыл бұрын
RIP LMAO
@Ari-hh4bw3 жыл бұрын
Is it appear important battery/lcd message after changed it? Even though its original ?
@RealWorldReview3 жыл бұрын
No. That’s only on 11 and newer, with the SE being the exception
@Ari-hh4bw3 жыл бұрын
@@RealWorldReview ow any news on that so I can read it? Btw thanks so much for the clear information !
@andy09954 жыл бұрын
This is an important question. Do your SE show “Important Message” after replaced your original display to they new one? I’m wondering since the current iPhone will show it after being replaced by third party.
@RealWorldReview4 жыл бұрын
Nope
@andy09954 жыл бұрын
Really? Almost every Technician KZbinr told me so
@RealWorldReview4 жыл бұрын
@@andy0995 never seen that message on anything other than the 11/12s
@edug38532 жыл бұрын
Hey, specific question and I'm not sure if it's the replacement screen I got or the way I installed it, but after installing the new screen it doesn't track swiping on the left side of the screen at all. Once I swipe about halfway the phone acts as if I just took my finger off the screen. I can't even turn fully turn off the phone cause I have to swipe starting on the left side to do that. Do you know of something I could have messed up during the installation process?
@yotoprules936110 ай бұрын
Faulty digitiser. You could also try adding kapton tape like the video suggested, otherwise you will need a replacement
@Phi1Phi-vw6th Жыл бұрын
Can the iphone 8 speaker phone be used for se 2 ?
@yotoprules936110 ай бұрын
If you mean the earpiece, then yes. My earpiece needed replacing and the seller said it's compatible with the 8 and SE 2020
@ImisJB2 жыл бұрын
dang...bro rlly worked his magic wit this phone
@Johnnythe3rd467 Жыл бұрын
heyo idk if you'd respond back or anyone but when recently phone fell face flat first with phone cracking a bit but main issue is the screen coming off while trying to put the display cable and the other one next to it my phone hadn't been able to turn on display wise any ideas?
@Johnnythe3rd467 Жыл бұрын
only issue has been the display cable and had someone fix my mistake on that, still struggling with it
@angelcruz49804 жыл бұрын
Question my screen shattered and now my rear camera doesn’t work its not damaged at all but for some reason when I open to take a photo it stays at a black screen unless I use the front camera would a screen replacement fix this or something else might need replacing?
@C0RR2P73D4 жыл бұрын
Replace the back camera. That’s the only way to fix it.
@JessieKing42069 Жыл бұрын
you just saved me a couple hundred bucks, thank you so much! I subscribed =)
@vickymeow245 Жыл бұрын
I got my screen to work but it won’t allow touch… like I can’t press any buttons. What did I do wrong?
@KevinMcGann-j1f Жыл бұрын
why do you need to add the tape?
@ashtonsilva96373 жыл бұрын
How do u take the home button off
@turthrex1181 Жыл бұрын
Does it show the not genuine screen under the settings?
@RealWorldReview Жыл бұрын
Nope. This is before they implemented that
@yotoprules936110 ай бұрын
I can confirm, there is no "non-genuine" message. But you will lose true tone.
@joshuariddellski2 жыл бұрын
why do you use the sticky tape in that bit? I didn't use that and my screen was fine for a day or two then started having a mind of its own and randomly tapping uncontrollably-is this a bad connection, bad screen or the sticky tape issue?
@RealWorldReview2 жыл бұрын
Sounds like a defective screen. The tape is for super aftermarket screens that have grounding issues. Most companies fixed it, but some are still cheap. Try to return the part
@HallowzDev2 жыл бұрын
I finished the repair step by step and my display is not turning on. The phone still functions because I can type in my password and connect airpods but the display is just black. I even tried swapping it out with my old screen and still nothing. I am not sure what to do.
@juanpastor1631 Жыл бұрын
OMG.. It works.. I followed step by step.. and yeahhh.. I did my self...
@jackiepardini93243 жыл бұрын
I was able to replace my screen but when I try to use my Touch ID on the home button, the display on the screen shakes up and down and doesn't recognize my fingerprint. Is there a step I did wrong or forgot to do. (The home button works if I just press it) Thanks for the informative video.
@saam17523 жыл бұрын
You broke Touch ID and now your phone is worth like £100 less
@RealWorldReview3 жыл бұрын
Some people would love for Touch ID to not work so Apple cant have their fingerprints
@RealWorldReview3 жыл бұрын
It is possible you tore a little bit of the home button cable when removing. If so, it cannot be fixed.
@saam17523 жыл бұрын
@@RealWorldReview or just don’t turn on Touch ID??? Plus what would apple even do with people fingerprints, sell them to people who need new ones or smthn idek
@danhudson46143 жыл бұрын
@@RealWorldReview There are people who can repair them. Depends on where it broke. People have successfully repaired snapped ribbons 100%..probably for a lot less than Apple charge for a new screen assembly too! Lol.
@morganmandery2 жыл бұрын
How can i remove the home button screws if they are stripped?
@RealWorldReview2 жыл бұрын
Might want to bring it to a professional if you don't know how to. The risk of damaging the home button is not worth messing with
@supersi90732 жыл бұрын
Do I need a heat gun or can I do it without this? As I don’t own one
@RealWorldReview2 жыл бұрын
No
@supersi90732 жыл бұрын
@@RealWorldReview No as in, I can’t do it without a heat gun or No as in, I don’t need a heat gun????????
@yotoprules936110 ай бұрын
@@supersi9073you need a heat gun/heat plate
@TheMindfulGrind3 жыл бұрын
I replaced the screen and the LCD comes on. Just doesn't respond to touch.. :( any tips?
@thesmithsdiaries67693 жыл бұрын
So mine doesn't type well but the screen looks fine, no scratch, but I can't type the screen. What would be your suggestion?
@RealWorldReview3 жыл бұрын
Possibly bad digitizer. Needs a new screen
@thesmithsdiaries67693 жыл бұрын
Yeah, I cant type or press the left side, well Getting a new screen or LCD right? It cost $100 at ubreakIfixit, do you know where I can buy a new screen for iphone SE 2020, USA? Any recommendation
@thesmithsdiaries67693 жыл бұрын
I found one on Amazon cause the link on description is unavailable, not I just need some motivation lol
@RealWorldReview3 жыл бұрын
You got this lol just be careful around the home button area
@thesmithsdiaries67693 жыл бұрын
The screws are stripped and I can't open it anymore 😭
@jacksonfriedlander94363 жыл бұрын
I got a question why did you have to put the tape there and what sort of tape does it need to be
@yotoprules936110 ай бұрын
Polyimide/kapton tape, and it helps with grounding issues causing the touch screen to fail on aftermarket screens. Depends on the quality of the screen
@wer_hatgefragt79616 ай бұрын
my screen the new one i just put in doesnt turn on bute my old one does (i cant ceep the old one it has red lines`)
@garoukim43145 ай бұрын
while I'm changing the display, camera sensor just disconnected but the power goes on. The problem is it gets really hot when it turns on like 10 seconds after turn on, the bottom parts of the camera gets like 60 degree
@davidchase7166 Жыл бұрын
That was a super helpful walk through. I'm an engineer but have never worked on phones and you explained it more than adequately. I have a question though regarding the touch ID which is now unavailable, not a problem having to tap in the code but the button doesn't work at all. I've rechecked the connections and I was very careful with the cable, and ideas? Thanks again for the video.
@MrCrispyNips04 Жыл бұрын
Did you replace the home button with the screen? Because the original home button is paired with the phone and if you replace it, it will disable the Touch ID, so if you still have the old screen, remove the home button from it and put it in the place of the replacement one on the new screen and hopefully that should fix it 👍
@davidchase7166 Жыл бұрын
@@MrCrispyNips04 Thank you very much for replying, I used the original button but what I stupidly done was tore the ribbon cable very slightly. I didn't realize how fragile they are. I ended up giving up on it as I was given a second hand phone.
@youngsavage12454 күн бұрын
i wanted thank you for you help i did it your video was extremely help great
@aleksandarmarkovic8853 жыл бұрын
Are batteries interchangeable between 8 and SE2?
@lizak73233 жыл бұрын
No , there is a small difference in cables I guess ? Not sure why exactly but it’s surely not interchangeable
@sahilmotorvlogs92114 жыл бұрын
Price?
@commandojoe1233 жыл бұрын
This looks very fiddly. How difficult is this to do for a first timer?
@Ahyash_Chaazaq3 жыл бұрын
Easy just take your time and make sure you have all the tools need I'm going to do one my self waiting on the mail now
@kdoug37864 жыл бұрын
Couldn't even do step one. One of the screws by my charging port won't unscrew (the top is damaged and not a star shape anymore). Guess I'm screwed. Get it?
@RealWorldReview4 жыл бұрын
Nice pun, sorry for the phone lol
@scotstandard4 ай бұрын
Great Video! Thank you!
@pink_slxp4204 жыл бұрын
Can I switch the screen for an iPhone 6s? I saw they are almost the same size
@RealWorldReview4 жыл бұрын
Not even close
@lightlysaltedcalmingvlogsa72864 жыл бұрын
iPhone 8 screen works
@JP85FIN2 жыл бұрын
Why the tape at 3:37?
@RealWorldReview2 жыл бұрын
To prevent grounding and touch issues on aftermarket screens
@Eddybane5972 жыл бұрын
When adding the camera cable back in it gets super hot and has an electrical burning smell, any ideas?
@RealWorldReview2 жыл бұрын
Sounds like it was plugged in with the battery plugged in. Sounds like something shorted out. If that's not the case, then there might be some damage to that cable or some liquid damage. Although it could be anything really
@arnelmar32743 жыл бұрын
Replaced my 2020 se with an iphone 8 screen. But after that, wifi no longer works. It is connected thought, just can't connect to internet. No idea how to fix.
@marcialmunoz15113 жыл бұрын
My wifi doesn’t let me slide it . Any suggestions
@lokislife9202 жыл бұрын
This video is great. I appreciate it dude. Helped a lot