Reviving a 1953 Chevy 3100 1/2 ton Short bed You won’t believe the transformation! Kansas FARM TRUCK

In this episode of Iron City garage, Clay gets to work on the 1953 Chevy half ton short bed rescued from a Kansas farm a few months back. Tune in to see if, Clay can get this one to run and drive. 
If you like the video please consider subscribing! While you are there toss us a like and a comment all comments are read most are replied too. We love hearing from everyone so drop down below what you like or want to see more of!
Dirty Graphix custom wraps use code: PATINAPETE for 15% off your next wrap
www.dirtygraph...
Follow us on Instagram to keep up with all the daily content at Iron City Garage:
...
Iron City Garage Website:
www.ironcityga...
Iron City Garage Merch:
www.ironcityga...

[@bluerazor7049]

The truck was probably red when she started her life, and the seat looked to have been red too. It's good that the seat frame is still in it so if the owner wants it restored he can have it reupholstered again. Clay and the crew did aj amazing job popping out those dents, fixing the rot in the door and getting her back to life again!

[@jessiejames2155]

It brings tears to my eyes..to see a 30's 40's or 50's Vehicle, being saved and restored !

[@dominikschutz6300]

I think this yellow cabinet is worth restoring :)

[@lasalleman6792]

Great job. Good price. I'd buy it if I were closer. I suspect it's already been sold. Nice to watch something you buy being built up to road standards.

[@jessiejames2155]

Their digging them up again ! I'm seeing guys..repair oldies, everywhere , once again !

[@frankpetrone2966]

Great job guys!

[@mikewilliams2072]

Never seen anybody do body work with a 2lb shop hammer before!!!

[@josecortes5970]

Good Job

[@rayscrafield2106]

I had one that looked just like yours. Mine was even the same color blue. I put a small block in it with a 4spd. What a great truck. I sure missit.

[@Ironcitygarage]

Very cool

[@davidsmathers5621]

Nice job clay man you need a mic hard to hear you most of the time again great job on that truck

[@Ironcitygarage]

We were having issue with the case that the mic plugs into over heating the camera during this particular video. Plus all the added background noise I can understand. We have since fixed the problem

[@october7337]

Great job Clay! Thats how i would have done it!!

[@soyron]

We have a beautiful red chevrolet 3100 in our yard/field rusting away, good thing is that the engine still starts but the bad thing is that the rear axle is split I want to rebuild it but the worse part is I'm 14.

[@Ironcitygarage]

Gotta start somewhere! Get some tools and start watching videos on how to fix it

[@edwinbonnelljr1587]

Great job now somebody else can finish it up❤❤❤

[@wilmerbugsbunny8628]

Yes, car of farm=food. 👍

[@rickywhite7578]

Im actually looking for a vehicle truck. K5 blazer or 55 step side short bed (not the apache version)

[@kesterhively8773]

The ole farmer who had that truck must have liked his corn whiskey lol that poor truck don't have a straight panel on it lol

[@billtodd6509]

Man, Clay can get the job done, right?

[@RoyPhelps-k8f]

Should be a 216 babbit engine, ( stovebolt engine)

[@juandartyy]

40:12 if it runs great why the pull straps

[@alfredamantijr3908]

You guys are without a doubt. Awesome big super fan of your channel. Keep making more videos. Thanks.

[@kesterhively8773]

Seems like it would have made more sense to change the door and hell of a lot easier??

[@thembrelectric]

Where are yall located? I have a 52 chevy truck I need fixed up

[@rickywhite7578]

Alot of whiskey dents on that truck

[@tommarkham7760]

Boy who is your mech 😂

[@JosueRodriguez-ft8hc]

Buentrabajo

[@claudioandersonribeiro6763]

Top

[@joaoalonso3726]

SAB TUDO 1953 PARABEIS MECANICO VISAÓ BRASIL

[@daviddamico4288]

Why didn’t you just replace the whole door…

[@Ironcitygarage]

Then it wouldn’t match. Can’t have that nice patina truck and a random mismatched door. Kills the value

[@mikewilliams2072]

$8500. For a $800 truck I would like to meet the person that buys this truck, I got a few trucks I would like to sell him!!!!!!

[@rickywhite7578]

8.500? No thank you. Not for a straight 6. 3 on tree.

[@Ironcitygarage]

@@rickywhite7578 it sold so 🤷‍♂️

[@dannymusgrave4516]

Don't make sins tour apart a good dore to repair a junk one

[@joaoalonso3726]

RELIGUIN TEM QUE SER CONSERVAD NOT 10 ASS BRASIL

[@wilcothefox]

Great to see this patina truck being revived.

[@mikewilliams2072]

What you are doing is stretching the metal to where the next guy will have to cut it out to repair it, I would rather have it before the shade tree body work with black smith tools!!!! You are just causing someone more work down the road!!!!

[@wes11bravo]

I missed the part in the video where Clay was asking if anyone had advice about doing bodywork on old trucks - he seems like he knows what he's doing to me. Don't get all wound up over nothing - real life is aggravating enough without actively looking for shit that makes you angry. Who cares? If ICG is so wrong, you should start a youtube channel to show us all how it should be done. Get after it!

[@daviddamico4288]

Awesome work on the truck ,looks great..

[@RestorationVideo]

It's great to live in a country.. where people throw away cars like that.. and there are no drug addicts or scrap dealers . Luckily, the chair frame is still intact, so if the homeowner wants to restore it, they can reupholster it. You guys did a great job removing those dents, repairing the rot on the doors, and bringing the car back to life! Are you planning to repaint it or just leave it as is, thank you for sharing

[@rickywhite7578]

Definitely have to pressure wash any viruses out of it

[@jjtt7408]

PUT SOME HEAT TO IT / THEN IT WILL MOVE

[@jessiejames2155]

Those with an acid vat , will save the most $$ for restorations !!

[@mbleznyk1]

Good job clay!!

[@htalbott1899]

I have to agree Clay gets it done, but the older gentleman has the knowledge.

[@leeroyholloway4277]

Looks like they even got a little labor out of "The Mullet"

[@Ironcitygarage]

That’s Dr. producer mullet to you- the mullet 😂😂

[@leeroyholloway4277]

@@Ironcitygarage Yea, I had him pegged as the camera/tech guy. Shit... if he'd seen my mullet back in the 80's ... well never mind.

[@Hotrodford]

Your prices are nuts, but if someone is stupid enough to pay those high prices for that junk you might as well take it and laugh all the way to the bank. These young guys today are dumb.

[@wes11bravo]

Do you know what that truck is worth? I do. It's worth whatever someone else is willing to pay for it. That's the free market and it's the only reason human beings aren't still living in caves, wiping their asses with dried moss.

[@frankgriffin1121]

Why did you scab a good door part onto a rotted door ???

[@Ironcitygarage]

Did you miss the part where we cut the rot away and weld the two solid parts together?

[@JamesDavis-to1hn]

Clay rules!

[@mikewilliams2072]

8500! Your kidding right?!!!!

[@Ironcitygarage]

No we work on cars I’m not a comedian. It just sold for $8,500 headed over seas to Austraila You need to wise up to 2023 pricing.

[@starionslider2116]

I would sell it for 18k if someone paid it😂. You cant get mad at em for pricing when they know its gonna sell. Its the buyers fault if anyone.

[@JoseLuisNollola]

z❤