This Only Costs $6 To Make! How To Make A Medium Wavy Wooden American Flag

[@dbrimmage237]

Try clamping the wood pieces together with out gluing. Then carve while clamped. Paint or stain individual slats. Then glue together. Reduces taping time and messy paint/stain bleed

[@coppulor6500]

Great idea 👍🏻

[@hugskisses1601]

Well done, My Friend! And it’s borderless…just like the US!😳🤣🤣

[@MaxF01]

Thank you and i cant argue with that! 🙏🏼🇺🇸😂

[@Trouble4u2day]

Lmao

[@porkchop8542]

Hahahaha! So true

[@johndiego3105]

Max, I’m not sure if I have seen a more beautiful piece of work!! You have the gift and the talent to turn wood into masterpieces!!

[@MaxF01]

Thanks a lot man I appreciate it!!🙏🏼🙏🏼

[@humbertogarcia7317]

Absolutely awesome!!!!

[@DavesCoolCustomBikes]

Love your work what would you charge for something like this

[@tommywilliams3100]

That's smart as anything

[@richardwiese9054]

As a Navy chaplain on terminal leave after serving for 25 years, this is awesome!!

[@MaxF01]

Thank you for the feedback Sir and thank you even more for your service to this country!!🙏🏼🇺🇸

[@shanetemplar8709]

As always, great job Max. Wavy flags are one of the hardest to do. You make it look easy. The edges puts the flag a step higher than others I've seen. Great touch. Your shading with the torch added a great touch as well. Something that works for me to keep mistakes and paint bleed to a minimum: When you have the first stripes taped (in this you taped the white first), after you stained the red stripes and it dries, you can spray on one or two light coats of seal. Once that dries, change up the taping (take off the tape on the white stripes, put tape on red strips) then stain the white stripes. If any stain bleeds, it shouldn't stain over the red before you can wipe it off (seal coat should stop the stain). This method works even better for staining stars. Blue stain for union, one or two coats of seal, then carve out the stars. Start staining stars white. Any white that gets on the blue cleans up quick and easy with a wipe of a rag.

[@MaxF01]

Thanks a lot I appreciate it and thats a really good idea, thank you for sharing!

[@timlarson7228]

Wow! Sounds like excellent advice. Thank you for sharing your experience.

[@christiangoblirsch608]

Saw a lot of videos 'bout carving waving flags, but that's great! Very awsome work! I'm from germany, so greetings from here.

[@MaxF01]

Thank you very much! Greetings from America! 🇺🇸

[@steverobinett5934]

Nice job ! People don't realize just how much time and work goes into something like this, I've been a carpenter and wood worker since 1971, sale price for this should be in the at least $75-$120 dollar range, good craftsmanship there young man. 👍

[@CraigBendle]

I have seen flags like these, not as nice go for over $200 and they sold out of them at every show.

[@coppulor6500]

At a minimum. This takes a long time. 1 per day? $30 in wood, glue, stain, sealer, saw blade wear and tear, electricity, tape etc. so unless you're cool with $10/hr. At least $200. Plus, it takes time to get this good

[@chiparooo]

This wood flag technique is the best I have ever seen! I believe I have watched some of your other videos. This is definitely the one I want to try and make. Thanks for including every detail and method to create this. You answered every question I could think of. Well done video! Most of all, thanks for sharing! 👏🇺🇸👏🇺🇸

[@Michael-Makes-Stuff]

😳 That flag is freaking AMAZING! What an awesome result, and a great tutorial. Well done all the way around. 👍🏼

[@MaxF01]

Thanks a lot man i really appreciate it!! 🙏🏼

[@barbwellman6686]

Beautiful, love that sculptured wood look. Great job & explanations.

[@MaxF01]

Thank you!

[@Joshjoshnbvj]

I thought you would get the wavy look by using Home Depot’s 2x4s😂

[@MaxF01]

No kidding 😂

[@Fleshybitz]

Omg so funny, I need to go through so many to get a straight one

[@michaelclarkson3759]

😂😂😂

[@karenbeyerlein997]

You did such a beautiful job on your flag! It is the small touches that make it so remarkable! God Bless you & the U.S.A.

[@MaxF01]

Thank you so much i really appreciate the feedback! 🙏🏼 God Bless!!

[@CraigBendle]

Your way is the best way of making one that I have seen. Nicely done and a great video too!

[@MaxF01]

Thanky you very much!! 🙏🏼

[@richerworldproductions]

I'm Canadian, and I LOVE it!!! How are you not a millionaire selling those by the truckload?! Great work

[@danielhanawalt4998]

Absolutely beautiful work. No more needs said.

[@MaxF01]

Thank you very much! 🙏🏼

[@markholmes1346]

This is definitely my favorite flag, great job Max! Love it! ✌🏼❤️🙏🏼

[@chrislocke1042]

I've seen a lot of these done. Finally, someone does it in my opinion correctly.. flags are thin, so i like how you did the edges to make it look thin..

[@MaxF01]

Thank you very much i appreciate the feedback!!

[@davidcahan]

Turn our flag into art. Makes me want one. That thing is cool

[@MaxF01]

Thanks a lot man I appreciate it!

[@MrPatdeeee]

Absolutely Awesome!

[@WillimHensley]

Absolutely BEAUTIFUL!!!

[@MaxF01]

Thank you!!

[@retiredtom1654]

Nice quality job, and a lot of detailed comments.

[@MaxF01]

@@retiredtom1654 thank you very much!

[@josephscott5753]

This flag is beautiful and I really appreciate how you have shown step by step how to do this! I am excited to try to make one myself!!

[@MaxF01]

Thank you very much! Im sure it will turn out great!! 😁

[@raymondrobitaille6952]

Looks amazing… Great job. Thanks for sharing… 👌👌👌

[@MaxF01]

Thanks a lot Raymond!!🙏🏼

[@woody1320]

Very well done!!!

[@MaxF01]

@woody1320 thank you very much!! 🙏🏼😁

[@rogercreager8050]

I'm excited to build this flag. I have my boards cut down to one inch. Had a mishap with blade that's stopping me a little bit. You do make it look easy. Handcarving the stars will be a challenge Thanks for your posts.

[@MaxF01]

Heck yea thats awesome! Just take your time and itll turn out great! No problem! Thanks for sharing and best of luck 😎

[@larryearly5916]

Looks great. I really like the size.

[@dw7922]

Wow, that’s really beautiful. Amazing workmanship 🇺🇸

[@MaxF01]

Thank you very much!!🙏🏼🇺🇸

[@mentorJu]

Hey … I made my first flag today using your technique of angling the corners. It looks great! Thank you!

[@MaxF01]

@@mentorJu thats awesome!! No problem! 😁

[@sittingindetroit9204]

Hint I saw on another video. If you have a couple of bleeds, torch them darker and they "disappear"...

[@Masterproll]

Very nice work, i will try it on my own next vecation. 👍 You should panit/stain the back sides on the edges too, that would make a perfekt look. For the glueing proces use baking paper as table cover. The most wood glues dont stick to it and you can often reuse the paper, because the glue will fall of, if it is totaly dry. Just do a dry run befor using a new gluetye for the first time. Keep on the good work!

[@jamesbrigham1299]

Exactly. Parchment paper works great.

[@dennisrocker]

Yes Sir, Im 69 yrs with lots of woodworking experience. Always looking for faster ways to create worthful and meaningful Americana crafts. Thank you for sharing the ways that you have learned by trial and era that will give most of us the opportunity to create an almost unflawed art piece the first go around. In wish that i could make the stars go faster. However, I must be dilegent and consider the soldiers who have given their all for this flag. thank you,

[@jimhinkle7245]

You can use wax paper under your glue ups to prevent the work sticking to the bench. NICE JOB my friend!!!!

[@juanbarturen2726]

GREAT JOB. looks great.

[@helicrashpro]

The way you did the edge by trimming out the back side made a really nice effect.

[@lisamoore4711]

Beautiful! 🇺🇸

[@MaxF01]

@@lisamoore4711 thank you!!

[@kellyhatfield1301]

Very cool. I have the wood glued up and ordered the carving disk and stencils

[@salazar44]

Pretty FN Sweet!!!

[@MaxF01]

@salazar44 thank you!! 🙏🏼

[@IAOtradingpost]

You did a really nice job. I make mine almost the same way. Keep up the good work.

[@leiladellorusso6662]

That is absolutely gorgeous!!!

[@humbertogarcia7317]

Absolutely gorgeous!!!

[@MaxF01]

Thank you!!

[@msjoanofthearc]

It's Beautiful!

[@g-30fit79]

Really nice job, educational and entertaining. 😊

[@MaxF01]

Thank you very much!! 🙏🏼😎

[@Bluerosecaro]

Absolutely beautiful! Love it!

[@MaxF01]

Thank you! 🙏🏼

[@Bluerosecaro]

Do you sell these? If so, how much?

[@MaxF01]

@@Bluerosecaro im sorry i do not, i have thought about it but they would be hard to price because they are so time consuming!

[@ryanmh31]

You have been a great inspiration for all of my work. Awesome job as always. Back to the lumber yard I go.

[@MaxF01]

Thanks a lot Ryan! That makes me really happy to hear 😎

[@yemarican]

cool idea dude.. I like it.

[@MaxF01]

@@yemarican thanks dude!

[@larrynelson734]

Very cool. Fantastic. Great job.love the look 👍❤...

[@GazzaJollyRoger8152]

🎯Awesome! Thank you for sharing!

[@MaxF01]

Thank you!!

[@printittowinit]

glad to see it's not just another cnc vid. looks amazing bud great job

[@southbayproducts5371]

Nice work looks awesome

[@MaxF01]

Thank you!

[@jeffreyknotts4148]

Gorgeous Old Glory!

[@dougc78]

Damn nice!!! And you made it look simple…..thanks for sharing.

[@tomytable1753]

Amazing job.

[@MaxF01]

Thank you!

[@Jim-u3s]

Love it, heading to the wood shop

[@supermodestmouse]

that's great! def on my list of things to try :)

[@MaxF01]

Thank you! You really should its a fun project 😁

[@casesimmons2645]

That flag rocks

[@MaxF01]

@casesimmons2645 thank you very much!! 🙏🏼

[@moncorp1]

That is a cool flag. Nice work. I don't have the patience for doing those stars like you did. I'd have just painted them.

[@darenfitzpatrick1270]

Awesome project. Thanks for the tutorial.

[@jewelpotter6221]

Gorgeous ❤️

[@MaxF01]

Thank you!! 🙏😁

[@robertm348]

Did you also paint the stars? Thanks for the video!

[@tpobrienjr]

Very nice result. It appears to be adaptable to a Betsy Ross flag, or an 1812 (15 stars, 15 stripes) flag.

[@KE4YAL]

That looks amazing thanks for sharing your techniques you make it look so easy Great video Thanks

[@americaiswicked]

That's cool man. You should do other flags like Ireland, Scotland and so on. God bless

[@tinaknutsen]

❤️🇺🇸💯 I love it! And everything it stands for!

[@MaxF01]

Thank you!! 🙏🏼😁🇺🇸

[@tinaknutsen]

@@MaxF01 🙏4 🇺🇸💯😊

[@AvantGarde4445]

That's a really nice piece. Great video

[@williampacey9194]

Awesome wooden flag, your skills with the stars was excellent.

[@JimSmith-ct6in]

Great job man. I must say you have the patience of Soloman.

[@TheHumbleCarpenter]

absolutely beautiful job!!!! Loved the video and subscribed!

[@BobMuir100]

I think that’s truly excellent! Well done! Bob England

[@brianowens5115]

You do such a good job. The flag is amazing.

[@MaxF01]

Thank you very much Brian I appreciate it! 🙏🏼

[@larrystone5749]

Young man you have a talent Looks great and thank you for sharing enjoyed it Be safe God Bless

[@PatrickArnold-x8s]

Fantastic I am looking at getting back into woodworking, this would be a fun project

[@markburke6365]

I am going to have to give you an A+ on this piece, Very nice , well done, I really like it ! Exciting my man.

[@Jimc4007]

Think this is my favorite flag you have done. That grinding disc while putting out a ton of dust really works well. I'm with you on using the frog tape on these, I don't have a lot of issues with it bleeding the stain like the blue tape does.

[@MaxF01]

Thanks a lot Jim and thank you for the feedback!

[@drunkwoodswyllia4885]

Wow!! You Sir are very talented!! Great work and tutorial!

[@MaxF01]

Thank you very much!

[@reuma7823]

Kia ora from Aotearoa (New Zealand) Wow that's friggn amazballs!!!! Thanx for the inspiration & for sharing with us. You have definitely got a new subscriber 🥰 🍻

[@joyousjoy4ever]

DUDE! Nice job! Those are gorgeous! Im looking for my niche…you found yours! Thanks for sharing! 😊❤🙌🙏

[@NorthwestOpenSeason]

That looks awesome. I definitely want to try that. Great job

[@Trouble4u2day]

Thats beautiful!

[@MaxF01]

Thank you very much!! 🙏🏼

[@JGerm]

Great video .. God bless the USA 🇺🇸!!!!

[@MaxF01]

Thank you!! 🙏🏼🇺🇸

[@tomunverzagt5271]

That is awesome. I love it. Thank you for showing me that.

[@ronvilla5149]

Very nice work!!! I will definitely be making these!! Thank you!!👍🇺🇲

[@mcjok88]

Great looking project

[@dougstearns6746]

Very nice a lot more work than it looks. 🇺🇸

[@mikeking7219]

Nicely done sir 👍

[@MaxF01]

Thank you Sir! 🙏🏼

[@johnhorchler667]

On the Punisher one I was going tosay I like how you can see the wood in the back.

[@liamflorentine902]

I thought this was done with a CNC. Good on you. Great project.

[@adventureswithedna]

I've done pretty good selling flags over the past few years. I did a thin edge one like this a few years ago. I always considered it my flag cause it took 3 years to sell. I had it listed for 100 more than my normal flags. A few friends told me it was cool but not necessarily worth the extra money. Now that it's gone I miss it cause I really liked it.

[@johnagorman]

It's worth the money

[@1991DesertVet]

How was it not worth the extra money when it takes a lot more work to make one? I guess your friends never made one.

[@sflagg0817]

great video as always, i made your mini flag build and use it when we go camping as our site sign ive made 3 in total i gifted 2 of them both to veterans and they were really appreciative of it thanks again for sharing your knowledge and talent

[@amyloomis235]

The wood flag is beautiful!

[@jenna6256]

Beautiful......I think I would have just sprayed the stars white.

[@Joey.Darkwoods-Studio]

Beautiful man! Well done.

[@edwardchandler1187]

Glad I found your page because I was looking to make flags like this one and you make seem so easy to produce. Great job!

[@elitelawn9547]

That is a Awesome wave flag. I have seen a few made and that is one of the best. Great job. I will be trying this. Thanks Max.

[@MaxF01]

Thank you very much for the kind words! 🙏🏼 i hope the build goes well for you!

[@fredgarcia9586]

Very nice. I will have to try one myself. good job

[@luisalejandrojuarezvallada5900]

Hola Max, es un gusto ver un trabajo tan bien hecho, se agradece tu esfuerzo por mostrarnos paso a paso como elaboraste esa bonita bandera. Saludos desde el norte de México.

[@ULTRASMOKE]

Pretty ballin Mister

[@michaeldibb]

It looks awesome, thanks for sharing how to make one.

[@DKWalser]

That turned out very well!

[@cpas2525]

That came out awesome, nice work!

[@bernie716]

Well done!