Can I still drive you're the all is for my son service and that is not until I can get it to dealership
@SolutionMan022 күн бұрын
Excellent video, thanks!
@MaxF012 күн бұрын
@SolutionMan02 thank you and no problem!!
@danteslament6663 күн бұрын
hi Max, great video as always! I've made a few flags from a couple of your videos. I saw in an older distressed flag that you've made using the GRAFF Speedcutter Wood Carving Disc to create the distress looks; have you made the switch to the flap disc because it's safer? Both seems to produce the same effect, I was too scare to buy the wood carving disc or shaping disc but after seeing this, the flap disc is the safer way to go! thanks.
@MaxF013 күн бұрын
@danteslament666 hello! Yes safety was the reason for the switch. The GRAFF was probably a little bit quicker and did allow for some sharper adges but i did worry about it safety wise but the flap disk does a great job and feels much safer to me. Thank you for the feedback!!
@justtoobin4 күн бұрын
No torque spec on the axle nut 😂 wtf
@nolanzahajko97194 күн бұрын
Do you have any videos replacing the alternator?
@MaxF014 күн бұрын
@@nolanzahajko9719 yes i do
@casesimmons26454 күн бұрын
That flag rocks
@MaxF014 күн бұрын
@casesimmons2645 thank you very much!! 🙏🏼
@jmw6895 күн бұрын
That. is. awesome!
@MaxF015 күн бұрын
@jmw689 thank you!!
@robertbuckley34805 күн бұрын
Either 1 you can pick cos if you want it darker you don’t have to waist money for pre stain
@werkfriend5 күн бұрын
I FINALLY FOUND THIS RESOURCE!!! Thank you!!!!!
@MaxF015 күн бұрын
@@werkfriend no problem!! 😁
@RS-rl7gj6 күн бұрын
These flags look amazing. I am trying one this weekend. Wish me luck. Would love to see more of your work
@MaxF016 күн бұрын
@RS-rl7gj thank you very much! Best of luck to you!!
@RS-rl7gj6 күн бұрын
White stain and rounded over
@scottsmith316 күн бұрын
This is NOT how you disassemble/reassemble a Glock frame. So many errors and inaccuracies
@adriancasanova29637 күн бұрын
Thank’s you did it very easy. Gracias amigo.
@MaxF016 күн бұрын
@@adriancasanova2963 de nada amigo 👍🏼
@mentorJu8 күн бұрын
Hey … I made my first flag today using your technique of angling the corners. It looks great! Thank you!
@MaxF018 күн бұрын
@@mentorJu thats awesome!! No problem! 😁
@allenbazar89848 күн бұрын
Thanks really good instructions on how to layout the waves…was scared about laying the waves,like the white stripes and the clear stripes find the white kinda hides the burnt area maybe too much for my taste though.
@dondieu31549 күн бұрын
Loved it! Have been wondering if I could use plywood instead of cutting 1-1/2" strips. You answered my question. Thank you.
@leliazar19829 күн бұрын
Muchas gracias, just changed mine by seeing your video.
@MaxF019 күн бұрын
@leliazar1982 no problem!
@woody132011 күн бұрын
Very well done!!!
@MaxF0111 күн бұрын
@woody1320 thank you very much!! 🙏🏼😁
@mrwarmonga12 күн бұрын
Damn bro is like you got reverse syndrome. You did everything backwards. First you got a ratchet on the nut and a socket on the bolt. You always unscrew the nut. The shocks are tied for the purpose for easy installation.
@honvik356913 күн бұрын
Thanks for the video! Kids were working in the yard, so I bought them all Chinese food, had the wife go grab food while dad fixed his window. Was finished, cleaned up, and inside 10 minutes before they got back! 10/10 instructional vid!!
@lukebryant949414 күн бұрын
Is my ac broke or is my belt just bad
@shredblackwood15 күн бұрын
Good job on the video exactly what I needed to get the job done on my Silverado.
@MaxF0115 күн бұрын
@shredblackwood thank you! Glad to hear you got er done!
@trichio18 күн бұрын
Nice job!
@MaxF0116 күн бұрын
@@trichio thank you!!
@dylannyc332318 күн бұрын
Im pretty sure mine just has no tension so thats probably why i have no ac video definitely helped
@DewayneKnowles18 күн бұрын
Where is the 1995 Chevy Silverado 4x4 automatic transmission,7.4L engine 8 Lug rotors.whats the price
@GivanioMelo19 күн бұрын
Great help without need of any third party software. Awesome!
@AliDieb-fi7od19 күн бұрын
Did you not have to jack the truck up to replace both rear shocks?
@IAOtradingpost22 күн бұрын
You did a really nice job. I make mine almost the same way. Keep up the good work.
@migueldominguez716223 күн бұрын
good video. it happens. before you get the tire on the air loose the big bolt on the wheel. 🤔
@zahidbd125 күн бұрын
Thanks a lot.
@josephlanglois807326 күн бұрын
Max what did u cut the strips down too i did not hear that thanks wide is what i mean.
@steponacracker386527 күн бұрын
A suggestion... 4:44 goes by before actually starting the work! If you explained what you are going to do as your taping the paper to the flag, Then get right into it... A voice over explaining what exactly you're doing as you do it. Could have easily been a 9-10 minute video and got exactly the same result.
@mattweber650527 күн бұрын
That deepwell socket is the key here.
@Baileys.small.engine.repair28 күн бұрын
When reconnecting the battery should I reconnect the negative or positive cable first? Or does it not matter?
@MaxF0128 күн бұрын
@@Baileys.small.engine.repair positive first when reconnecting
@Baileys.small.engine.repair28 күн бұрын
@@MaxF01 thank you so much!
@spiritlaker891929 күн бұрын
My sister needs a new one, and this is going to help. Thank you
@MaxF0128 күн бұрын
@@spiritlaker8919 no problem!
@mikewatson411329 күн бұрын
Umm in process of making mine Can’t wait till I finish. Umm. 😅Awsome job man!!
@MaxF0129 күн бұрын
@mikewatson4113 haha ummm thank you and i hope it turns out!!😂😁
@glennduke7621Ай бұрын
What i did is i cut a hole in my wall so it wont be sticking out so far and so it doesn't look like something can be in it
@nymbiusАй бұрын
Bro i love you so much (not in a gay way)
@josephlanglois8073Ай бұрын
MAX F i am not good at making the 45s how to u measure the top of the plate and the sides.to get get the 45s thanks.
@lawrencechan5999Ай бұрын
I just replaced mine two hours ago, and I was wondering why my hangers were crooked. But they look exactly like yours. I’m not tripping out anymore 😂
@rdmjoneАй бұрын
I love it! Thank you
@pigweed000Ай бұрын
Perfectly planned and executed instructional video. It sure saved me a lot of time and frustration!
@myprayerforyou777Ай бұрын
Did you buy it at home depot? Or lowes?
@thunderchild321Ай бұрын
Thanks even tho i manhandled dat little lever like thingamagiggy it came off..guess ya suppose to flip it back and forth
@davidis7Ай бұрын
Thanks for posting. What did you use to make the template?