Remember watching you build this, so enjoyable…. all the rust repair and fabrication most definitely worth it now. Brilliant to see the car looking and going so well 👍
@Urchfab3 ай бұрын
Thanks 👍
@doOf3r3 ай бұрын
Warm soapy water is your friend applying vinyl stickers.. and hindsight is a wonderful thing XD
@jamestyndall5293 ай бұрын
I was going to comment to you Sophie water as well but was not sure if I was right
@blacksheepdrifting77343 ай бұрын
You should avoid soapy water with modern air release adhesive vinyls! It traps air and water and also stops them from sticking properly! Vinyl without the air channels you can, but you tend to fight it if soap is used!
@tigattac3 ай бұрын
Happy birthday, Matt. The car is awesome!
@Urchfab3 ай бұрын
Cheers
@oldieman7303 ай бұрын
Stickers makes it look like a race car now. Good on track video, and I like that you are sharing all the learning on how to rectify handling issues. Love the ride section too, he did enjoy himself going by the footage. Well done.
@Urchfab3 ай бұрын
Cheers
@jamestyndall5293 ай бұрын
@@Urchfab I have been a subscriber since you built the ramp truck
@YootubeUK3 ай бұрын
I did love the sound at the end with it normally aspirated! Good of you to do passenger ride alongs. Top man!
@randomgoose3 ай бұрын
Happy birthday, for yesterday!
@Urchfab3 ай бұрын
Cheers
@rawbennett3 ай бұрын
Another straight up, no nonsense video from you Matt, watching your progress is always interesting and this video has really shown the honest side of ramping up the bhp, hopefully you'll find that sweet spot between chassis, suspension and sweet, sweet booooooost!!! 😂 All power to you mate, keep on rolling 👊😁
@trevorjarvis30213 ай бұрын
Absolutely awesome Matt, quite unbelievable to consider what you have created and how well it goes! Fantastic achievement.😊
@Urchfab3 ай бұрын
Thanks, much appreciated.
@raycousins13823 ай бұрын
That looks brilliant, yes I agree with softening the rear and checking the ride height.
@burbt60693 ай бұрын
It’s great to see you really pushing Mushy Pea and giving us all your feedback. Good luck getting the handling sorted.👍
@Urchfab3 ай бұрын
Thanks 👍
@davidlawrencebanks46103 ай бұрын
Nice to see you out on the track. 👍👍
@dsdek723 ай бұрын
Stressing about the stickers? Behave yourself mate! What you have achieved with this build is incredible! Footage from the track days is brilliant. Very informative detailed information without being too much. Keep up showing us the development!
@johnharen99213 ай бұрын
Great to see you give the kid a ride. Good on you.
@WesW31873 ай бұрын
Josh probably thought it would have the original motor in it. He would have been surprised.
@minigpracing30683 ай бұрын
AIM has their stuff together, the camera integration with the data overlay, plus the drivers features is just great.
@Urchfab3 ай бұрын
I very much agree.
@planespeaking3 ай бұрын
Urchfab in the angle looks fine imo. As a million people have already said a spray bottle with soapy water means you can slide the decal around.
@jimschafer91963 ай бұрын
Stickers they are pesky item, I had a work van I destroyed the decals and never got them installed. great content and God speed as you continue to dial this beast in. Cool on the ride along too.
@Urchfab3 ай бұрын
there's a nack to it, and I aint got it. Cheers
@martinultimatevw37793 ай бұрын
Congrats and good luck everyone on the AIM raffle 🎉
@Urchfab3 ай бұрын
Amen. Cheers
@deadprivacy3 ай бұрын
Noone but you is ever going to arecabout the sticker, the car looks amazing and the way you hang that thing out on track its hardly a princess
@blacksheepdrifting77343 ай бұрын
@Urchfab Matt, for future reference on the graphics.... anything that is going to be difficult to see when fitting, (anything going on to glass, light colour vinyls, or similar colours to the paintwork) get a pencil and do a rubbing on the application tape (the paper that is over the graphic) doing this gives you a clear view as to where it is in relation to the surface it's being fitted to, and if it needs to be straight, you can see where to take the measurements from 😉
@fredrikassarsson16533 ай бұрын
Hahaha 😂 sorry mate I just F’in love seing you struggle with the decals because it looks mad familiar! 😅
@Kg-ed6mm3 ай бұрын
aloha I enjoy your content. This is why you have track days. To improve
@ianspicer38853 ай бұрын
It's good to see the ol girl on the track 😊
@NialPowerCork3 ай бұрын
Looks great😊
@steptoeandson35543 ай бұрын
All good fun with plenty of expletives, plenty of soapy water in a spray bottle is the sticker fitters secret tool.
@user-ot7ec4uc3g3 ай бұрын
Would like to see this going around Mount Panorama at Bathurst Australia.
@Mike.Howard3 ай бұрын
The Mushy Pea's turning into a mini Hoonicorn! 👍👍
@toxaq3 ай бұрын
Josh casually checking out the speedo 😄 Stickers are a cool idea, I would've sworn more. Happy belated birthday. Interested in how you're going to solve the power application situation. I've never driven turbo.
@Urchfab3 ай бұрын
Haha yeh I noticed that. I've no idea being honest but apparently its an easy fix. I will update when I no more!
@rotax636nut53 ай бұрын
Control rear roll stiffness with bump stop rubbers on the rear shocks, you will need to experiment a bit obviously to get the right length/ hardness of the rubbers but it's a good way to go, Roland, HT Racing Ltd
@malcolmyoung78663 ай бұрын
Belated Happy Birthday Matt… 🤔🥸
@stevegraham38173 ай бұрын
Happy birthday to you for the 23rd, happy birthday to me for the 28th. lol
@pjofurey62393 ай бұрын
Nice one , like that .23 goes back in Irish family about 7 generations , moto -x too .great job on this race car .still looking for a Kung Ming mill 😀
@Urchfab3 ай бұрын
Cheers, That's a rare old tool. I've only ever seen 1!
@Chris_Lastname3 ай бұрын
When your toyo's eventually wear out, you should try some yoko AO52's. Good tyre
@xenomorph13eoe3 ай бұрын
Try using a wing/spoiler and some canards for more grip would look cool too ngl
@kevinhamling19633 ай бұрын
G'day, The car looks great and sounds great. Now it's all learning. Q. With the stickers your putting over the race numbers could you make them reflective. They would look awesome at night. So thanks for sharing ✌️ Peace from Melbourne Australia.
@Urchfab3 ай бұрын
Hmm reflective would be really cool actually. Something for next time! Cheers
@quicknickdriver85103 ай бұрын
Belated Happy Birthday Matt
@Urchfab3 ай бұрын
Cheers
@neilwharton7203 ай бұрын
A co lab with the stig would be good to test the car and maybe help with some tips
@animal_engineering3 ай бұрын
at least the nightmare is only on the door you actually use, foook just had to pause to buy tickets stupid old brain forgot. The mushi pea bloody love how she has come along. can you have two maps programmed in so if you want to back to your drifting roots and just have fun you can change the spring and send it? I am 100% sure Josh many years from now will remember his ride in the mushy Pea much stronger than if it was just another Porsche. once you find the balance man, she will be a weapon. Good times, I think once you go turbo there is so much stuff that changes like gear ratios, diff ratios, because boost in gears is so much different than just the normal aspirated vehicle. 1 second but I'm sure a lot more spirited and fun. Really love watching the Pea grow
@Urchfab3 ай бұрын
Thanks and good luck in the raffle. Switchable map would be worth looking at. It's surprising how much the extra power changes the handling. Few more track days and she'll be mint! Cheers
@paulwhiteman36253 ай бұрын
Rattle can and a stencil, Matt! It's the way forward.😊
@Urchfab3 ай бұрын
Probably more my style anyway! Cheers
@peterbonnez3 ай бұрын
Fun time. It goes well...
@oheso3 ай бұрын
Happy Birthday!
@gjl5659073 ай бұрын
I have an ford prefect I am looking at doing up. I had one as my first car in 1976. I was wondering what the set up is for the front end?
@Urchfab3 ай бұрын
Mine is mx5 running gear underneath
@BillyBob-uc9zp3 ай бұрын
Slow the ratio electronically in throttle response settings maybe?. It's lovely and quick on the straights. Be a shame to lose that. Happy Birthday dude 😎
@Urchfab3 ай бұрын
I've no doubt Steve will be able to smooth it out without loosing too much off the top. Cheers
@malcolmyoung78663 ай бұрын
Documenting ‘faux pas’ is the way forwards no need to replace that door sticker it’s now officially part of ‘The Mushy Peas’ heritage and an j start talking point for everyone to comment on each time you meet a fan of subscriber…
@JamesYoung613 ай бұрын
Kyle from BoostedBoiz has an electronically controlled wastegate on his MR2 (1500hp K20) and it does boost by gear, and RPM ramp of boost, I suspect that it is expensive but it might be worth a few calls to see if you can get it sponsored and the boost to be where you want it to be throughout the rev range.
@Urchfab3 ай бұрын
I will look into that. Cheers
@jzab3 ай бұрын
Using throttle as an axis on your boost request table also helps.
@rognevs56953 ай бұрын
Was a good day come the end mate, roll on the next one, just remember omelette and eggs me son 😂
@Urchfab3 ай бұрын
Cheers Helm x
@Chilled_Mackers3 ай бұрын
Happy belated birthday fella! Superb to see the pea out and the only problems being configuration - do you still monitor the oil pressures etc or is it all sorted out? Superb episode chap 👍
@Urchfab3 ай бұрын
Yes I'm monitoring things and all looks good! Cheers
@Chilled_Mackers3 ай бұрын
@@Urchfab Glad to hear it fella, love following the progress!
@MARTINA-gc3tq3 ай бұрын
You need to link up with Ivan Dutton from Shed Racing.
@Classiccarbscouk3 ай бұрын
Great vid, great car, bought a raffle! Wish me luck 👌😁
@Urchfab3 ай бұрын
Good luck Bud! Cheers
@ldnwholesale85523 ай бұрын
Here in Oz you are not allowed numbers like such. Must be a standard font. And no sins allowed withing a 100mm of number back ground. At a Sprint or even track day mininum dress is long sleeved flame resistant long sleeve attire. eg jeans, leather shoes and woollen jumper.
@scoobysean5553 ай бұрын
Happy belated birthday buddy More power is always better than less power now comes the flat floor splitter wing diffuser basically a time attack car 😂 the grip will improve 150% probably need more power 😂
@Urchfab3 ай бұрын
Haha, that look is is not for me! never say never though.
@Brucey86519 күн бұрын
I think you need to take it to the ring for micha to drive
@crazyoilfieldmechanic31953 ай бұрын
I got frustrated watching you fight those stickers. I hate those things and always pay someone to do it because I will F it up for sure !!! Are your tires equivalent to Michelin pilot Sport Cup 2 tires or are they track only slicks ?? Great to see you at the track 👍
@Urchfab3 ай бұрын
I'm on Toyo r888r tyres. Yep lesson learned! cheers
@adinlouw3 ай бұрын
3days late, but: Happy Birthday Matt
@Urchfab3 ай бұрын
Cheers
@terencehawkes39333 ай бұрын
That car is REALLLLY fast!!!
@mrwolsy36963 ай бұрын
1st motor BP 1.8? 2nd motor Saab turbo? 3rd motor BP 1.8 turbo? I remember the Saab went in, but the dyno video was a BP turbo?
@Urchfab3 ай бұрын
Always Bp in this one bud
@oikkuoek3 ай бұрын
HBD! Turbo is set up just right, when the boost marginally compensates the overheated intake. Also, I told you to soften that suspension years, if not decades ago. Also also, fixing an alternator is not that hard. Getting payed to fix an alternator is impossible.
@Urchfab3 ай бұрын
I need to take bigger swings with the adjustments for sure. I will try full soft next time I'm out. Cheers
@wobbler63723 ай бұрын
Amazing how far the pea has come from the rust bucket it was
@Urchfab3 ай бұрын
Thanks, its been a long journey. Over 5 years now!
@markrainford12193 ай бұрын
It's definitely quick.
@ConkreteMan3 ай бұрын
Happy belated birthday
@Urchfab3 ай бұрын
Cheers
@Steviegtr523 ай бұрын
Hi Matt. My birthday too. 23rd may. But a lot older than you. Done quite a bit of racing in my days inc F1 stock cars. So When i had the r33 gtr Skyline. That had 640bhp at 1.45psi boost. But it had an Apex i controller on the dash. so if the car was too twitchy on the bends i could drop the boost for that part of the lap. Just wondered if you could have yours adjustable on the fly. If it was my car I would be aiming at 350 bhp. Probably using the 2.0 sportech or ztech motor as a base. Good luck this season. Steve.
@Urchfab3 ай бұрын
Happy birthday Steve. The ecu has boost control so shouldn't be an issue to smooth things out. I think if I was going to swap the engine I'd go for an Na option. Cheers
@albegt983 ай бұрын
👍💪
@mwhelan533 ай бұрын
Ummmm, why not laminate the 2 stickers flat on the bench then apply to the car?
@Urchfab3 ай бұрын
I had asked for them to be laminated together as one but was told it was too many layers and would make them difficult to fit.
@ninjabob81703 ай бұрын
Happy birthday for the other day!! Are you planning on coming back for the quick 60 at Mallory again this year? 🤞🏻🤞🏻
@Urchfab3 ай бұрын
I'm thinking about it. Cheers
@sjv65983 ай бұрын
For the algorithm 🤟🏻🙂
@Urchfab3 ай бұрын
Cheers
@uliwehner3 ай бұрын
seems like you went from being the car that is hard to pass in the corners to the car that can pass on the straights. seems like a net gain still.
@richardbrowne36413 ай бұрын
I think your engine in the Mushy Pea(Sweet Pea) can handle 300 h.p., Erchman! That's what some engine builders did the a turbo powered American made 2013-2017 2.4 L Dodge Dart. I think the engines are simular. Too bad on the decals.
@karlsanderson81273 ай бұрын
Na just need more downforce
@sixeses3 ай бұрын
23/Michael Jordan.
@stuarthoffman16333 ай бұрын
I feel bad you release this vid a few days after your birthday. Play you cards right and i will get you a AIM pressie😊😊😊😊