Is a lifted Crown Vic good any good off road?

[@averagemachinist]

Good to see you’re back!

[@Tier1Norseman]

My 2010 has 2011 front seats 😂, the new PD shift levers from the Taurus/Exploders, a Tahoe Police center console - longer and taller, Police steely PPV Caprice 2013 size 18 rims with 1.5" spacers, 2001 Explodition rear coils - gives a natural 3" lift in the backend, 2003 Exploder rear struts modified with the Vic lower mount for the lower control arm - 2.5" lift naturally, ADTR front/rear heavy duty sway bars, Monroe rear shocks and all I need to upgrade is the upper control arms. The donkers sent me the uppers for the 91' Vic and there is actually a better aftermarket option now. Few other odds and ends but it gets more compliments than my truck ha ha. Working on an even bigger project now. 😂 Car looks awesome.

[@giovannicintolo89]

Sounds like a sweet setup! I'm looking at fabricating my own lift knuckles for the front to get the proper suspension geometry back, and adjustable 4 links for the rear. My driveshaft just about bottoms out in the transmission tailshaft housing, and the wheels are a bit forward, I had to trim the back of the rocker panels.

[@self-madejacobo8281]

hell yuh i love to see someone using their Vic like how they should be used

[@HereticJon]

Back when I had an 06 p71 I took it through a state forest, there was a stock 03 f150 4x4 that had open diff's that was struggling through some mud, the crown vic had no issue.

[@giovannicintolo89]

My first was a civilian 03 with an open diff and highway gears. Amazing where that thing would go with snow tires

[@rowanclark2673]

wow just found your channel and its so great! you're narration is so good!

[@giovannicintolo89]

Thanks for the feedback! I was hesitant to start using voiceover, but I feel I can put out a better production using it, especially with the spur of the moment stuff.

[@SneaktheWolf]

Amazing work, also sweet car

[@booboothefool3342]

New here, but love this channel already keep it up boss

[@giovannicintolo89]

Thanks!

[@SIX4TALL]

That’s the dash cluster of a 06-11 p71 how did you get those 98-02 crown Vic wheels on it and which lift is that I know it’s not the 3 inch cups which is the tallest that they make for the 05-11 years unlike the 98-03 years which they make 5 inch cups for

[@giovannicintolo89]

98-02 wheels will bolt on, but they have more offset. Those are Lincoln wheels with the embossed logo on the center cap filled with bondo. Cheap 3 inch spacer lift from amazon. Fine in the back, but I want to build lift spindles for the front, suspension geometry isn't great. I lost reverse, she's been sitting.

[@SIX4TALL]

@ wow that looks like a 5 inch lift

[@giovannicintolo89]

@@SIX4TALL with the tires, It is

[@kimmadison5504]

Hope that rear def is welded 😂

[@giovannicintolo89]

Very stiff lsd when I rebuilt and regeared the rear end. Basically a locker on anything but dry pavement

[@naes4822]

Freaking Gerry 😂