Is a Tesla Power Frunk Install Worth It In 2023?

In this video I cover the V5 Power Frunk kit from Hansshow.
Power Frunk: www.hautopart.com/collections...
** Use the code IOWATESLAGUY for 15% off your order. **
Hardware Needed
- Pry Tool or Screw Driver
- A pole or piece of wood of some sort to hold up the frunk
- 8mm socket
- 10mm socket
- 13mm socket
- 13mm wrench
- Hex key ratchet
- Extra Zip ties (provided in the kit)
- Electrical tape just in case.
TESBROS Video (Updated): • Install Hansshow Power...
Chapters:
0:00 Intro
0:53 Awesome-Hardness Scale
2:32 Intro Part 2
3:27 Disclaimer
4:02 What's In the Box
4:40 Tools Needed
4:52 Install
9:43 Wiring Diagram
9:57 Install Continued
14:17 Wrap Up and Final Thoughts
__________________________________________________________________________
⚡️⚡️ Join the Iowa Tesla Guy Discussion on Discord: / discord ⚡️⚡️
__________________________________________________________________________
__________________________________________________________________________
⚡️⚡️ If you live in Eastern Iowa, please consider joining the Quad Cities Tesla Owners Group:
www.teslaquadcities.com ⚡️⚡️
We have a lot of great discussions using Slack and periodic meetups. Lots of fun! Join the community!
__________________________________________________________________________
__________________________________________________________________________
⚡️⚡️ Check out all the accessories that I use in my car at www.iowateslaguy.com ⚡️⚡️
__________________________________________________________________________
Car Mount Setup
👉🏼1/4” Male to Male Adapter: amzn.to/3HplhNq
👉🏼Tripod Extender: amzn.to/3nnzAdH
👉🏼Suction Cup Mount: amzn.to/3DkgL0h
👉🏼Swivel Ball Mount: amzn.to/3ceDG1k
My Car
⚡️ Early 2021 Tesla Model Y LR
⚡️ Multi-Coat Red
⚡️ White Seats
⚡️ Standard Gemini Wheels
⚡️ Original Center Console

[@ChucksRover]

Have the kit and really needed this video to pull the trigger on install. Many thanks for the great tips.

[@SoleLo]

Great video as always Tim! I have the kit installed and it did take me about 35mins, I really love it and glad I got it.

[@MrRiceOwl]

Holy cow! This video confirmed I won't try this. Way beyond my skill set. You saved me from myself 😄

[@iowatesla]

Glad to be of service. 😬

[@xipalips]

And for that price! Yikes that's an expensive mod!

[@BCTeslaGuy]

Awesome video with lots of tips and tricks. I'm going to be doing my install this weekend. Thanks again. Love your channel and content. 🚗

[@irvdownes3320]

I installed my kit last weekend and it’s flawless! I wish I placed my motor where you did but so far no rattles and fictions as needed. I wish I seen your video first.

[@KevinT3141]

I installed it yesterday, it only took an hour to get to the first test, but it was another hour and a half to figure out where/how to mount the control module and motor and get the wiring all secured as neatly as possible. It never occurred to me during the first test that the hood might not come back up and what to do if it didn't! Fortunately I had watched multiple install videos over the course of a week while waiting for my unit to arrive, which showed two different ways to release and re-secure the spring, so that was a mistake I didn't make. Glad you got yours back up! Incidentally, a broom handle made for the perfect hood prop and fit into recesses in the hood and rad support so that it couldn't shift or fall while I was depending on it. I also swapped the struts one at a time so it was always half supported, and didn't put much weight on the prop to begin with.

[@tonypeskett8397]

You put a lot of time into making that very concise video, hope you get lots of likes!

[@iowatesla]

You have no idea and thank you.

[@glennhamilton4097]

Thank you for making this video. This should relieve some of my stress when I do my install later this month.

[@iowatesla]

Thanks. I hope so.

[@johnvana1207]

Jim: great on screen graphics. Love your inventiveness keep up the good work.

[@iowatesla]

Thanks! I appreciate It. Can be difficult to make a video like this interesting to watch.

[@ywashington368]

You are right about the wires, your instruction made it seamless, I going to give it a try. I have order the kit, but haven't install it yet.

[@davidwill6397]

Great video! Thank you!

[@milmd]

Thank you for your video and the tips. It's great 👍👍👍

[@alainapotaduh]

I would totally do this, but my husband probably wouldn't let me! (We share the car- it is our only car by choice) My husband is not nearly as handy as I am, so he wouldn't even attempt it. Still watched the whole video though. Thanks for your contribution to the community!

[@silentmajority5657]

Great vid. Thank you Sir.

[@kmeyer5598]

Good job...Brave man!

[@pjcliffo]

Thanks for the video, some very good tips. I did this job a couple of days ago and found it very difficult, so for me it would fail the test. I found releasing the struts and installing the new ones was the most difficult part due to lack of space and light. You made that section seem too easy. I also accidentally undid the other end of the spring without noticing at first, must be a common mistake. Fortunately I noticed quite quickly and referred to the pictures to relocate it. You didn’t seem to disconnect the power before connecting to the positive I’m not sure that’s a good idea. Also not sure about your placement of the control module, I prefer back up under the wiper cowl, out of the way of the filter, nice and dry and good space. Yes it’s a great feature but looking back I should have paid an experienced person to install it. Including that extra cost it may not be worthwhile. Glad it’s done and behind me.

[@swiftMyDay]

Does anyone know if the warranty do the car is impacted by this?

[@MilesCone]

Great job!!

[@iowatesla]

Thanks! I appreciate it.

[@brianriebedriveselectric]

Great tips! Hopefully they’ll save a lot of other people from those panic moments. I know just the feeling! 😬

[@iowatesla]

The struggle was real. Thanks. The instructions need to be improved. Would make a huge difference if it matched the actual kit and car. That aside, this really wasn’t a bad DIY project.

[@saverioconca6303]

This was one of the best videos for this installation. I just installed the same kit and the instructions suck. S try calling someone to ask a question. Forget it they are only interested in selling product. I had an orange cable and a small cable and two small screws left over ….. any idea what they are for….. I sent an email to ask but got no response…… also in the instructions it said to watch the video …what video

[@Mainuh]

Glad to be able to see the install done. Thanks Jim. It is up there on the awesomeness scale, but at $600 it's only about 30% there on the "worth it" scale for me. There's gotta be about a 400% markup on production costs there!

[@iowatesla]

Probably. Everything for a Tesla seems to be priced at a premium. Use my discount code if you want to buy one in the future.

[@SoleLo]

@Mainuh I felt the same way when I was looking at it, and honestly I've been really happy that I got it. I've actually used it more than I thought I would and my s.o. loves it for when picking up groceries.

[@skywalk_7]

I got mine for $400, much better value.

[@guttagutta420]

I agree. The awesomeness/hardness scale needs to include value. I haven’t even opened my frunk in months. I guess if you use yours everyday or multiple times a day then this may be for you. Not sure why tesla doesn’t include this oem.

[@iowatesla]

@guttagutta420 My wife loves it and uses it all the time.

[@massimodeltorre2897]

Thanks for your explanation, I'm very sorry, I don't figure out how did you open the hood, could you explain it in brief? Thank you

[@premiumuser867]

You should check if your HEPA filter assembly is making a good seal on the inlet plenum. I installed this kit last night and I placed the auto-frunk controller in the same spot. The issue is that it lifts the HEPA assembly by about 1/8 of an inch on the driver side. It’s enough to keep the white seal from contacting the air inlet.Needless to say, this will be a huge issue in the long run.

[@KevinT3141]

Ugh, I'm reading this now. My module was placed a bit differently and a little lower, so hopefully I'm good. We had a lot of rain in the days before, and there was a significant puddle in the plenum under the filter (which we drained), so from the factory that seal was already probably not the best. Maybe we improved it?

[@bobshortland3079]

If unsure what goes where on install take a photo to refer back to is what I would do on any project mate

[@gixxer5143]

I have sadly encounter a few issues during installation as some of you have as well and warranty issues after the installation and using the frunk for s few months. Hansshow does not back up their product and when it failed me (after months of usage), the frunk would not open and I had to take it to Tesla and incur additional charges to have them open the frunk for me. Tesla removed all the aftermarket parts from hansshow I connected back all the original ones and the frunk started working properly again... Hope this helps save someone else from the headaches and the expenses...

[@Arms_KY]

Thanks for the video! Can you confirm the button inside the frunk is disabled when not in park? Wouldn’t want groceries or an item to hit the button and open frunk while driving.

[@iowatesla]

The button is factory and there as a way to get out of the frunk if you happen to be small enough to be shut inside. This button doesn't do anything to the factor setup. I don't know how I would test this but I would bet that it wouldn't do anything in drive.

[@coby7831]

It is inactive when in drive or reverse or neutral. Put your Y in drive and try opening the frunk, it won't happen, it is interlocked via software.

[@ravenm.]

I wonder how similar the model S kit is. Great job!

[@iowatesla]

No idea unfortunately. Thanks for watching.

[@DzenanKotoric]

do u do service to get this installed and if so where in Iowa are you

[@joelm077]

I think you need to offer installation for some of these things. Lil side biz to pay for them.

[@bobuk5722]

An additional tip. Take photo's before disassembling anything. You can reference them afterwards should you need to return to the OEM install and they may help with things like spring placement. Not having the wiring locations documented is appalling. Who the heck checked this product out before final sign off? I would n't buy it knowing this on the basis of what other unknowns might be lurking in it. If the can't bother with wiring detail what state is the firmware in the control box in? Would I really want to connect that to the car's CAN Bus.

[@faubourglincoln]

You still need to use the phone to open it? No physical button?

[@tylerwright6380]

I like your video and I want to install this; but, I am concerned about all the negative reviews I have seen for Hansshow products in general and this product in particular. I would appreciate it if you would give periodic updates as to how the product holds up. Another KZbinr had his frunk structs fail after about 2 months of use.

[@iowatesla]

I’ve seen the reports. This is their 5 generation product. Been working perfectly so far.

[@coby7831]

Did mine in a couple hours, very logical install. Mine is a Satonic and worked first time and ever since, Good video by the way.

[@mauricekoning1338]

Hello Coby7, I have also ordered the Satonic are the parts similar with this one?

[@RogerWilsonTodd]

What’s the solution when the 12V battery requires a jump start? A23 battery applied to unlocked vehicle still open the frunk?

[@iowatesla]

I think the battery would still work. This doesn’t defeat the stock system. Just automated the up and down. Need to check that.

[@timchan334]

The problem is these kits cost like $500, the question is more like…”is it worth it?”

[@zoltrix7779]

The frunk is for my leat used items, First Aid Kit, Fire Extinguisher, Tire Repair Compressor, Charging cables. Its not worth it for that stuff.

[@fayzeenali4953]

Does this void or impact the warranty?

[@iowatesla]

Only on the parts you replace - like the struts. Otherwise no.

[@kpop863]

does this work for 2023 model 3?

[@coby7831]

Different kit, but yes.

[@badtoro]

What’s harder? Installing or uninstalling after it fails? The kit is a pos and will break

[@monkeyrun]

it's nice if it comes preinstalled, I don't care much about the frunk.

[@e.r.6147]

$500 ??? No thanks

[@jlemieu1]

It is 100% not worth it for a S Plaid because it can't even hold a grocery bag

[@iowatesla]

No need for grocery bags when you’re moving that fast. 😉

[@e.r.6147]

Does it hold a racing helmet? Thats cool 😎