Is free energy possible? Yes, in an open system its 100% possible.

Testing the Kromrey converter, focusing on evaluating its ability to power various loads while maintaining a consistent RPM and avoiding increased amperage draw.
Please like and subscribe if you want to help change the world and relase this technology to the people.
#engineering #science #howto #electricalengineering #freeenergy #overunity #prototype #build #electrical #magnet

[@MadscienceLPTECH]

Please Like, Subscribe, Comment! Love you all

[@IlieCovrig-o1t]

@MadscienceLPTECH .DUTE LA LUCRU PUTOARE ORDINARĂ.NU CERȘI.DACĂ EȘTI DE BUNĂ CREDINȚĂ .FĂ CEVA PE BANII TĂII ȘI OSTENEALA TA VEZI TESLA.

[@Lissica1]

Where is the free energy???

[@MadscienceLPTECH]

Stay tuned. The fact there is no additional amperage draw when you place a load on it is very intriguing

[@Lissica1]

@@MadscienceLPTECH Place a bigger load to it! In special, load resistors and/or something with coils and capacitors and maybe the mystery will be solved. I still see no free energy. I recommend to read some books or articles about Coercivity and magnetic saturation! Or just simply clear the fact for yourself why the output power of generators is given in VAR (volt ampere reactiv)!

[@elmultimediaschoolofartscu3924]

❤❤❤😊😊😊😊 please 😢 please 🙏 do a video on exactly how you build this so we can build as well

[@MadscienceLPTECH]

@@elmultimediaschoolofartscu3924 will do.

[@edwardsaladhands]

Amazing work keep it up! This reminds me so much of the morin motor (washing machine pump with the keeper plates ) a couple years back i managed to get the morin motor to self run for 5 hours on a heavy load then i disconnected it as its very loud and was getting to late (but did not want to at all ) i seen one of the leads had vibrated loose on the lead acid battery so this thing was running itself the whole time which i recognised beforehand that thats what it wanted to do when i spun it up with a dremal it would spin faster at a curtain resonant point so purposely changed my motor to a weak one to allow the gen to do the work itself.i was never able to self run again but did start self run/charge to a curtain point then start dropping this i beleive is becoz of the lead acid which dont like to work with this type of energy i think youll be better off with supercaps bank or lifepo4 anyways that was 12 years of trying at that point and finally achieved it no matter what anyone says so keep going and NEVER GIVE UP!!!

[@overunityresearchchannel]

Awesome I was excited to see this video today no one else is covering the kromrey converter thank you so much for your hard work and dedication 👍

[@MadscienceLPTECH]

More to come!

[@MadscienceLPTECH]

No Change in amperage draw on 2 pole Kromrey with Load

[@Fred-y8w]

Nice work

[@rogerburley5000]

Hi leds are non linear load, you need a resistive load and measure the current and voltage of the out put, at the same time as reading the power feeding the device. Then you know the efficiency

[@MadscienceLPTECH]

ok i have some nice 50W halogen bulbs ill power this week for ya all :)

[@modrribaz1691]

People often label highly efficient designs as 'free energy,' but no invention rivals the old steam engine, which can be adapted to run on almost anything.

[@Marco-xz7rf]

maybe a tesla turbin, if someone would actually try to create one and do more research on them like one youtuber :D

[@MadscienceLPTECH]

@modrribaz1691 so there is no new technology and old stuff will be the best we ever have ? I think there are many free energy devices just waiting to be released that produce unlimited energy. What about machines that utilize the heat of the atmosphere and run cold, 2 working fluids... like geothermal above ground ? Anyways free energy is real and there are many people with working pulse motors, I've seen the Muller motor and it can power homes

[@Marco-xz7rf]

@@MadscienceLPTECH yes the work "free energy" isn't really defined. It could be free energy like if you build something out of mirrors you can heat stuff, free energy from the sun. Most think of it as perpetual motion energy, which currently wouldn't work with our understanding of physics, but i mean we don't know that mich for that long. Who knows what crazy tech can be found for wormholes or whatever haha.

[@modrribaz1691]

@@MadscienceLPTECH There's always room for improvisation, but not in the abstract. I mentioned steam engines because they can run on almost anything that burns, not just petroleum. In theory, even urine and feces could power them, but that's off-topic. Back on topic, the larger the power source (an 'open system,' as you called it), the more this energy seems free, though it isn't, since physics assumes a closed system.

[@AFRorie]

@@MadscienceLPTECH Doesn't contain boiling water, thus cannot be real energy. Everybody know the best ways to get energy is just differing and more effective ways of boiling water.

[@noleftturns]

Is free energy possible? Hell no - this is a click bait channel

[@MadscienceLPTECH]

@noleftturns not click bait at all... I'm building the actual machines to do it with... they operate in open systems, the same as solar panels. Why would free energy not be possible? Geothermal, solar, wind... all free energy from open systems

[@noleftturns]

@@MadscienceLPTECH When the energy comes from "the ether" Then you know magnets, batteries, and other tricks are to be used. Now you see it now you don't parler tricks...

[@JimmyBrooks-i2f]

Anybody who went to school know is fake

[@MadscienceLPTECH]

@JimmyBrooks-i2f I went to school for electrical engineering and physics... its not fake. Real science requires imagination, not man made laws

[@Marc.2.0]

I remember potential tech from 2005, it's you ?

[@MadscienceLPTECH]

@@Marc.2.0 not me... I

[@Marc.2.0]

@@MadscienceLPTECH ok,you work fine ! add S1 on the positive terminal FWBR and self charge..best regards

[@toffeeflavour]

Ill make a video to respond to yours.. its too complicated to write you. Ill have it up by the end of this weekend. Thanks for this video! Jp

[@MadscienceLPTECH]

@@toffeeflavour looking forward to it

[@eligijuspranskunas3509]

are you seriously? you wont collect radiant energy without battery! only battery can collect it.

[@GuardianEngraving]

Just found your channel, good on ya mate, insta sub.

[@MadscienceLPTECH]

@@GuardianEngraving thanks a bunch! :)

[@catalinbrasoveanu8819]

Fake

[@MadscienceLPTECH]

Nothing is fake... literally showing everything and the progress replicating the technology

[@doubleooh7337]

smaller wire but many side by side in parallel for more amps aswell as high volts, I'm gonna make a generator soon and i plan to do 150x(0.20mm) strands of wire, to wind I'm just gonna do one layer of wire at a time and each layer as its own strand so at the end i can put them in parallel , 150 strands of that thickness can handle 13amps whether that can be generated is another question but that many is the only way to possibly get plenty of amps

[@MadscienceLPTECH]

@doubleooh7337 I think the radiant energy dosnt even have amps... just volts... we need to try everything. Keep me updated, let's work together and spread this info

[@overunityresearchchannel]

I don't know if it matters but I was told to use ductile iron and barrium farrrite magnets to build a kromrey converter

[@MadscienceLPTECH]

@overunityresearchchannel I think the magnet thing is a myth... iron for sure though! Thanks for the comment

[@MrThacke]

Do it!

[@LanceSchloss]

bs

[@JenkoRun]

COP > 1 is a recognized measure of performance, look it up.

[@MadscienceLPTECH]

THANKS FOR THE VIEW