IS IT WORTH PUTTING LED BULBS IN PROJECTOR HEADLIGHTS ? | MUST SEE!

ARE LED BULBS GOOD TO USE IN PROJECTOR HEADLIGHTS we test a led 9005 bulb in a halogen projector head light on this ram truck to see how the light output is compared to a standard halogen bulb in a projector housing or incandescent bulbs in this led vs halogen comparison we compared both bulb and let you be the judge on what is better for your ram 1500 ram 2500 or ram 3500 truck
Click HERE for the same bulbs
amzn.to/2Smrvt0
Click HERE to see how to remove the headlights
• Removing the Headlight...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
For transmission parts check out WIT
Contact Clint [phone]
Mention Boosted Motorsports and save 20%
www.wittrans.com/
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#bulbs #LED #lighting

[@BoostedMotorsports]

Watch this video for a better bulb setup for these headlights kzbin.info/www/bejne/hny2aYF5r9mEidksi=4SrPxXsFBTkOVFlJ Click HERE for the same LED bulbs shown in this video amzn.to/2Smrvt0

[@garyhoncoop8217]

You installed the LED incorrectly. You MUST clock them with the LED chip facing in the 3 and 9 o’clock position. When you do, you get the perfect light with the cut off line. I have the same lights on my truck. Once I turn them the light was fantastic. On the fog lights below, the light needs to be clocked in the 12 and 6 position to exposed the LED to the biggest part of the reflector,

[@cjandsara1]

Exactly

[@davidciliberti1148]

This is the truth. They may claim 360° illumination but clocking properly at 3 & 9 is necessary.

[@safayatovi3858]

For while i m also thinking like that🤔

[@Guillotines_For_Globalists]

I have mine installed the same way in my Yukon for the headlights, high beams, and fog lights, and I agree, LEDs point left and right versus up and down.

[@dipologtom8261]

Correct 3and 9 position..just did a 2015 srx..

[@eviljinsi]

I did the s-v.4 led and the brightsource extended cover, I clocked the chips at 9 and 3. I have a very good beam pattern, light is not washed out and I do not notice dead spots. Anything looks better than the oem halogen, I almost went hid over led but the delay on the hid was the deciding factor.

[@krollpeter]

9 and 3 o'clock is correct

[@SHADE117ful]

Glad we’ve got an updated video about leds in projectors I got my sv4 leds in my low beams and the light output is way better than the hikaris but the only draw back is they’re way more pricey than your standard leds just not a fan of hids but I see why people love em loving the ram content boosted keep it up 👌😎

[@thunderstruck6060]

Thanks brother I was actually considering doing this thank you for the video once again you’re awesome I appreciate all your videos

[@steveb.423]

I agree with you, I put some in my 2011 For Edge and I feel my halogen is brighter.

[@87331ysi]

As mentioned before i just installed these in the 3 o'clock to 9 o'clock position, they work great.

[@johnreese3762]

Very well done video! Great info, thanks!

[@Mikey_Maggz]

I think if you change your light orientation from north and south to east and west they’ll be a little better for you.

[@Ottonic6]

I agree, I believe they are supposed to be horizontally orientated (left and right).

[@bulbman7080]

Agree, have a 17 Grand Caravan GT, recently installed LED's on the inner Daytime Running Lamp/High Beam side of the housing. However not a projector, I feel the LED bulbs are better suited in present position vs the actual side of lense for headlights!

[@ThomasNogueroles]

Thank you on your review. It was very helpful now I know what to do.

[@richardfluttrow8900]

Tks for the info...I have a 2015 Ram 1500 and i have an issue of my right side head light tracking off to the right...I'm not sure what bulbs or lens are in the truck..as of now but I will be digging in to it asap...but thanks for the heads up on where to start....

[@robertlouera7431]

Im running leds on the low and fogs. Waiting on your vid to check out the hids!!! Great vid thanks!!

[@colemaurer5030]

If you rotate the bulb so that the LEDs are facing side to side (9 and 3) instead of top and bottom (12 and 6), you will get much better light distribution. Halogen bulbs have full 360 degree light output so it does not matter what orientation the bulb is in. With LEDs, the top and bottom have less light than the sides where the chips are, so there will be less light (dead spot) directly in front of your car when clocked correctly (9 and 3), but proper fog lights will fill that in pretty well. From what I've seen, Auxito LEDs are not that great, so if you want some LEDs that are brighter and better for projectors, here are a few I would recommend: 1: GTR Lighting Ultra 2 2: Headlight Revolution Sv.4 3: Amazon Katana 9005 LED (same as Sv.4, just cheaper) 4: Diode Dynamics SL1. I currently have the Sv.4 bulbs in my H7 projectors on my subaru, and they are super bright with great distribution, with only a small dead spot in the foreground that my fog lights get rid of. Hope this helps!

[@BoostedMotorsports]

Yeah going to try the 3/9 clocked position and see if the dead spots are better! I also noticed the ad for these bulbs is pretty deceiving. They said 16k lumens on the ad but when I got it the bulbs are 8k each which is less than others. Ill try clicking these first and then compare it to the HID setup in the projector next

[@dansmith207]

I run the gtr ultra 2's and will not use a cheap led as they suck and do not work well or very long

[@Ray-Willey]

@@BoostedMotorsports did you ever try it the other way?

[@snazynismO]

@@BoostedMotorsports did you ever try it the other way? 9-3

[@codyhudson4792]

​@@BoostedMotorsports any luck?

[@3IN1SDG]

For anyone who sees this. LEDs are ALWAYS supposed to be east and west not north and south regardless of how your original halogens were oriented. That's why he's having an issue with dead-spots to the left and right.

[@brendanmckenzie2042]

Thought it had to do with it being a projector? Is that not a factor?

[@kevenfont306]

Thanks I’ll try that on my car has that problem and was trying to figure how to fix it

[@3IN1SDG]

@@brendanmckenzie2042 Yes. That is also a factor.

[@brandon8496]

I’ve had good luck with the Auxbeam f16 plus. Crisp cut off line. Meant more for projectors..

[@Estes316]

I just put the same bulbs in.my 2019 Pacifica with projectors and absolutely love them super bright no dead spots

[@Estes316]

I put mine at 9 and 3 o'clock

[@Mr.Worf63]

I have these in my 2016 Elantra GT low beam with projectors and my results with them at 9 / 3 (Factory ) was amazing . No dark spots and they have DOT approved on them . I’ve had them since Mar. 2020 . Clocking them differently may help . I’ve already seen HID vs LED .

[@nicknick6960]

How u put them 9/3 i think is hard to tell if they are 9/3

[@Mr.Worf63]

@@nicknick6960 They are set in the 9 - 3 o’clock .

[@nicknick6960]

@@Mr.Worf63 not for projector headlights reflector yes. Also u have to lock them in place and they go up and down not 9/3

[@Mr.Worf63]

@@nicknick6960 No , they lock in at 9/3. I can tell by the way the cord is orientated ( It points down )If it’s a stock H11 , 9005 , 9006 …halogen light the connector always points down . Which is the 9/3 position every time.

[@nicknick6960]

@@Mr.Worf63 when i installed my gtr ultra 2 first on my projector was not locked on 9/3 and i had 9005. Now they are at 9/3 wire of the led pointing down right?

[@kevinsrides2916]

How well does the LED cooling fan work enclosed behind the cover?

[@leonlondono4372]

I put the beamtech cap chip led headlight on my Toyota prius lumens 8000lm/set and it doesn’t light up but it blinds other driver. What light would I need for my Prius so that it will not blind others and be a bright light ?

[@mwkoskamp1]

Nice video. Surprised about the amount of hardware you need to remove to change a light bulb. Guess it takes at least one engineer to change this light bulb. 😀. The evolution of led has been amazing over the past decades. From small indicator lights to room and car lights. Would be interesting if a filament led bulb for cars would be developed. However, by the time that is finished there may not be a market for that anymore, since all cars have oem led lights.

[@luisinhoens90]

base vehicles don't usually come with LEDs, and there are many used cars on the roads now that prices have gone up across the board. People are keeping their cars longer than in the past; these filament shaped LEDs would be an option for those owners (including me)

[@ryanwilliams5017]

curious if the beam pattern is better if you had clocked the bulbs at 10 and 3

[@KhaiMahase]

same problem here. We have an 07 grand caravan with the led upgrade. Fully upgraded led everything. Same issue with the headlights. Except I bought a 4 sided bulb, same issue with foglights. I didnt check to see if the foglights have an adjustment but Ill have to see if the headlights do. Ive read that its suppose to be the opposite way. The 2 led chips should be on the left and right side instead of up and down. Its looks fine outside of the headlight assembly but when you put it in its totally different.

[@713Scarface]

I have the same brand leds on my 2016 Laramie but have them set at 9 & 3 no dead spots and go well with the c6s fog lights you recommended on the OG 4gen that you had before.

[@slickrick9100]

Are they projector lens?

[@713Scarface]

@@slickrick9100 Yea

[@karthikmenon82]

Awesome video… can replacing the halogen to led affect the computer?? Should we consider some resistance to be put in series

[@kuyaspanky.]

I have the same issue right now with Lasfit LED. Weird pattern in my projector. Trying 2 switch 2 HID now.

[@911Fuser]

Also they didn't work without my Ani flicker mogule, canbus corrector. The old style doesn't come with canbus corrector so I bought a set. Worked perfect. The new style comes with canbus corrector, but as expected they didn't work. Plugged in my old corrector and anti flicker then worked perfect after that. Remind you these were on my 15 ram with mirror style headlights.

[@JoeyBoy718]

Did these throw a “bulb out” code on the dash? Or are they good to go out of the box without using OBDLink?

[@gary9182]

man I want to tell you I absolutely love your channel and as soon as I get paid next week I'm going to pay the monthly fee. Did these bulbs end up throwing any codes? I know you said that on the box they mentioned they would not throw codes but I wondered what your experience was because I did not hear.

[@BoostedMotorsports]

Thanks Gary! I would go with the HID kit that we show in the low beam projectors its a brighter setup! Check out the follow up vid we did to this one! 💪

[@Mr.Worf63]

Have you tried DDM Saber Pro X 55W or 50W ? They work in projector or reflector.

[@damianclarke5407]

Have you done the HID vs LED comparison? If not, will you be doing it? I am very curious.

[@LilKing420s]

I'm curious, did you try different clocking positions of the LED bulbs? For example 90 degrees from how you installed them for this video.

[@boggsie62]

Yes, I would've like to have seen that too.

[@darthnatas953]

I put Auxbeam F-16 Plus LED's in a 2018 Ram 3500. Crap stock halogen non-projector reflectors. Turned night into day. You don't need an expensive housing. These bulbs rock. Adjusted down they do not blind oncoming traffic either.

[@MWDAdventures]

I was told by auxbeam the dark spot has to be verticle not horizontal. this is to prevent the hotspot on the ground like you had.

[@jimmyrichardson7738]

I cant get my LED HB3's to turn to the 3 and 9 position.. Any help?? I have tried to loosen the screws but nothing helps..TY

[@thejuan4633]

Could you do an led and HID comparison?

[@danshields3654]

Is it a bulb adjustment to get better pattern or do your headlights need adjusting or a little of both.

[@deonscott3253]

I just installed Fahren leds now my fog or driving lights will not work. I have a 2017 Ram 1500. What is up with that? I replaced 2 low beams and 2 high beams

[@CMFS101]

I have a 2015 RAM I purchased and the previous owner or dealer installed some sort of halogen which melted around the bulb. Is that a common issue? Now I need new lenses

[@cliffhanger_5.734]

Yeah, I think you're right, they are more suited to the reflectors.

[@Zeek800]

LEDs will always perform better in a reflector type headlight than in a projector and that’s with ANY make of LED.

[@sivucit]

Hi, what is the paper or fillm you used to check dead spot on projector, it looks like film, appreciate if you can respond

[@Erland09]

Get diode dynamic hid kits. Best one so far for the project in my case at least.

[@thomasgoodjr.4832]

Where did you get the black headlight rings? Mine are chrome and they've got to go.

[@maxl7827]

LED bulbs in projector headlights are superb. I replaced my bmw oem high beam bulbs, they were halogen 55w per bulb. I replaced them with same power LED bulbs and they are amazing, atleast twice as bright.

[@dennishayko1289]

Agreed we did the same with our Mercedes AMG C350 and they are amazing. Only downside is people flashing me now.

[@maxl7827]

@@dennishayko1289 If people are flashing you then there is something incorrectly. I would recommend to check the aim of the headlights

[@Johnnygga]

@@dennishayko1289 they’re flashing you because you’re blinding the shit out of everyone. Projector or not, you’re probably glaring like crazy

[@dennishayko1289]

Thanks for all your suggestions. Appreciate it.

[@Zeek800]

My case is on a different vehicle, a 2017 Highlander and with similar LEDs ( smaller in size than most ) made by CLD and the model is called “ ONE “. I also have OEM headlight housings and low beam projector. I made the mistake of messing around with the headlight housing up and down aiming on a previous install. I’m pretty sure the beams are aimed too high. The suggested beam distance for a low beam is around 130 feet but these new LEDs shine great up to somewhere around 180-200 feet. The issue is there is better than the old halogens light from about 10 feet in front of the vehicle but it looks like I have a shadow right in front of each projector for about 20 feet and about 2 feet wide. I’ve marked off the proper beam height at 25 feet on a wall at work and tonight I’ll try to adjust the beam down maybe 1 or two inches on my break. If the beam pattern gets worse on the drive home I’ll remember to count how many counter clockwise turns I made and either turn it back halfway clockwise or do another couple turns down. As long as I get between 130-140 feet of good down road beam pattern and hopefully those dim spots reduce to nothing or at least less than 4 or 5 feet I’ll be okay because the halogen low beams even when new were pathetic.

[@ExtremeRecluse]

I have a 2007 Lexus ES350. I am looking for a complete led assembly. Have not seen any the don't need major modification to go from HID to LED. My HIDs are all broken.

[@dennishayko1289]

Just a quick FYI. It's not necessary to remove the grill to pull the headlight housing. It's just a 10mm for the top and bottom bolt and the clip in the wheel well access and your good to go. Cheers!

[@scottbongiorno3378]

Hey I have projector head lights whats a good bulb for the turn signal?

[@Thatjewnick]

Wanna match my headlights with dogs as well bought led headlights and they are the color I want (white) but no light emits to the road did I get the wrong led?

[@arevalo8789]

Damn man You already had the headlights cracked open, should’ve just retrofit a morimoto projector, hands down craps all over leds and hids in the Ram projectors. More expensive yes but waaaay worth it I’ve tried all 3.

[@2131400]

I switched from conventional to led I lost back up camera signal any suggestions thank u

[@thewilly00007]

I'm a bit confused...is there a separate low beam bulb or just the 1 LED that does both hi and low? I noticed you didn't do a hi beam low beam comparison?

[@rondhole]

Thank you very much man, you are one of the best LED bulb reviewers. I have the exactly the same problem with Corolla IM, it has a terrible beam pattern with uneven beam pattern from obvious reasons you just showed.

[@LouietheKnifeAddict]

Turn the chips to 3&9 oclock

[@mcham0846]

He didn't clock them right. Doesn't matter is it's reflecter or projector. They always need to be clocked 9 and 3

[@rondhole]

@mcham0846 yes, we did clock right and test it extensively. Many LED just have bad patterns on projector.

[@mcham0846]

@@rondhole just bit the bullet yesterday and got GTR ultra 2s. Blows any LED that I had in my projectors away

[@rondhole]

@@mcham0846 It is not a bad deal since it really gives lifetime warranty. it is not the brightest but has a Real customer support. If you are not in USA, you can go with Bevinsee V35, V45, or V55 and they are as bright and even brighter than GTR Ultra 2 but only 3 years warranty and not clear customer support since the seller is not business owner in USA.

[@theoxygen.559]

thanks for your video, bro, I'm tired of wasted money, ples tell me what affordable LED preferably 5500 for a solid white, for a projector housing?

[@djcnch]

Recomendarias de xenon en lugar de led en faros con lupa ?

[@davidlloyd2428]

Both your HIDs and the LEDs are a 1000x better than my 2013 Ram 6.7 projectors. I live out in the farmlands and had to put a light bar on to see better.What HIDs are you using? Dave

[@kanaletumlinson]

Much nicer appearance but yes hate the blind spots of LED bulbs compared to HIDs.. but same time I hate the bulk ballasts with HIDs.. going to go with LEDs until my new AlphaRex projector g2s come in

[@Gold1997GT]

Auxito perfected the LED imo..have them in all my vehicles

[@jesussilva6426]

Idk if this might work to remove those dead spots but try to put some 4 side leds

[@carlosfuentes6360]

What do you do when the turn signal starts going out??

[@toddhansen7963]

Would have been nice if you walked back and forth between bulbs blocking one at a time for an additional and nearly immediate isolated comparison but I liked the video even without that. Thank you.

[@SuperTRUMP3t]

Hey, I just spent this entire weekend putting LEDs in my headlights. There was a NIGHT and DAY difference when I turned the LEDs to having the diodes clocked at 9 and 3 (diodes on the side, skinny side up) and the light pattern was SO much better than 12/6 o clock and got rid of the bat wing dead spot. TRUST.

[@BoostedMotorsports]

We’ll try it and compare to HID 💪

[@PRITAMRPATEL]

@@BoostedMotorsports Diodes should face 3 & 9 clock position to avoid dark-spot projected on road kzbin.info/www/bejne/hXrSqGiPnMmFqNE

[@blackbeardthepirate7467]

Absolutely true on reflector type housings, our vision is horizontal biased since we don't fly by nature, and coincidentally you want more light on the ground that's rushing toward you in the horizontal plane. This does get tricky in projector housings, perhaps projectors are the use case for the 8 sided LED bulbs out there. Currently playing with a 360 degree adjustable to find optimal, projector housings can be very different internally model/manufacturer to model/manufacturer on how they bounce and focus light through the lens, tricky with the go-to 2 sided thin LED assemblies. The one I'm working with has the bulb coming in virtually perpendicular to the orientation of the lens.

[@PhaseSkater]

Why would anyone do 12 and 6? Wtf. That doesn’t even make sense

[@boggsie62]

@@BoostedMotorsports Did it work better at 3n9?

[@mc7072]

Have you had any problems like flickering with this brand ?

[@glennkullberg9370]

I have the same Auxito Y13 in my projector lights and they are AWSOME. Perfect light pattern, no "dead spots" and much brighter than the stock regular bulbs. Led bulbs like these should ALWAYS be installed with the lights "9 and 3 o'clock", that means with the wire pointing DOWN. You installed the Auxito bulb the wrong way.

[@hussain71000]

i have the auxito's as well but the beam pattern is awful with my reflector headlight and it's very blinding on oncoming traffic i emailed them for a refund and still waiting for their response

[@djlyfe557]

@@hussain71000 you should have you lights adjusted to keep from blinking other cars.

[@jonmanilenio]

@@hussain71000 you need to adjust the headlight itself

[@360.Tapestry]

@@hussain71000 you need to confirm that you know how to adjust the headlight beam. otherwise, you're just a menace

[@JahAllOverTheWorld]

Got the exact same lights with the exact same bulbs and now the dash light is on. Tried to use the OBD link and it still not working. Can anyone assist?

[@blackpiranaha525]

You didn't even try adjusting them with the adjusting key that you mentioned having! Try to fine tune it and see if you can get the ideal pattern after? I've also seen some LED lights that are 3 sided not 2 sided that supposedly work best for projector lights

[@wst8340]

Nice truck for sure 🇨🇦

[@Mooreman50]

Not a huge HID guy but I use them for projector lenses

[@MikeJBlues]

I put LEDs in my low beams. Didn't work so good on the high beam side

[@AZTechLabs]

fogs should be warm light or amber since lower frequency light penetrates fog and dust better. Bluer light scatters, hurts night vision, etc.

[@devildogg112985]

So are you saying that LED's are the better bulb at 3 to 9 o'clock or get a HID bulb?

[@911Fuser]

Love those lights, but mine would shut off randomly especially when I needed them the most. Rain and cold weather most noticeably. I got the Un upgraded style with no fan and heat sinks and they have held up pretty good. This is my third set. First set took a dump after around a year of use. Good bang for the buck though.

[@randyvillegas9413]

I have the same issue with my LEDs shutting off. But I guess you have to take it to a dealer ship and have them program something in your truck so they don't turn off randomly. But what lights you buy man. Can you out the link so I can check them out.

[@cameranhoyt9337]

I have a 2012 Nissan Maxima that comes stock with HID low beams and halogen fog lights and high beams. I was going to upgrade the HID to LED and orient them vertically but I saw a lot of reviews saying that it would cause the beam to have the opposite dead spots compared to this (bright on the sides and dim straight ahead). My HIDs have a slight blue tint that suck when it is wet out. What I did, that I think is the best solution, is I got bright yellow LEDs (the best color for wet roads) for my fog lights and insanely bright white LEDs for my high beams. Now my fog lights travel as far as the low beam while giving the golden glow to show the wet roads better. I highly suggest that strategy if you have projector low beams but reflector fog/high beams

[@cameranhoyt9337]

Also, it is worth mentioning that I bought this same brand and the packages I got suggest the lights shining in the 3 o'clock 9 o'clock positions (opposite to the orientation shown in the video) and that works perfect for reflector housings. It has no dead spots at all and looks like a giant flashlight down the road instead of two cone beams that overlap

[@on-wl4yu]

How do you properly clock hids?

[@cameranhoyt9337]

@on-wl4yu I'm not too sure about that, to be honest. My HIDs lasted up until a deer jumped out and totaled the car last week. Although they were definitely dimmer than they used to be but they were still bright. I'm not sure how to clock them, though. The LEDs just had to have the diodes facing a certain way when twisted in, but they locked in solid and didn't have any other way to be adjusted. As far as I know, my car didn't have a way to adjust the HID bulbs either, other than maybe minute adjustments by just forcefully moving them by hand after they were tightened down, but I don't recommend that because it could break the bulb very easily

[@Kimmy-lr3wd]

I think hid is better, lets see the comparison. I always want to try led in my rebel low beam

[@habebs7345]

Hi Can I install 120 W LED bulb in a car that has 55 W factory bulbs

[@jorgepineda8514]

I installed these bulbs about a week ago but everytime i drive at night they just turn off and when i turn off the truck and turn it back on they come back on but turn off once i start driving

[@gregbailey4290]

Did you ever try reclocking the bulbs? Did it help?

[@patrickbarry9027]

What about high beam? I don't think it's possible to easily swamp out for LED bulbs. just about lost my mind last night and they still aren't working.

[@indica_dogo868]

Can you re-clock the bulb to try and get smaller dead spots? I know you won't get rid of em completely.

[@BoostedMotorsports]

I can but it’s just going to move the dead spot. I’ll do another vid if everyone believes that will fix it but I don’t think it will

[@mileswatkins2162]

I was hoping you would of did a view from inside Good viedo

[@ProctorsGamble]

I just checked my new LEDs in my Taurusaurus They have a set screw but are factory set 😩 I used the paper to sight them by twisting the lamp in the opening on the headlight assembly to get the best pattern which is a small slightly dark triangle at the bottom. We’ll see if stays that way during driving 🤔

[@tallll70]

on my type it's same but if i unscrew it plastic ring which locks it in housing can spin where i could carefully make another opening 45° over to get the desired opposite orientation

[@MasterSumai]

Use LIGHT MOSES brand LED BULBS. They have a complete 360° LED'S all the way around the tip of the bulb to make the same coverage as a Halogen bulb. And they work great in Projector type housings or even in Reflector housings.

[@pyrce1590]

I got a dead spot any way to get rid of it

[@Brady7722]

Like it’s been stated before your leds are in the wrong position. Also no matter what hids will always be brighter. I just bought $35 led for my ram with projectors and have no complaints yet

[@rileyhance318]

i just replaced my led kit I had for a while with a xenon hid kit and it is way better. beam is even and my highbeams are usable now. my housings have dual beam for the highbeam which was conveniently right in the deadspot for the leds which basically gave me no highbeam.

[@mudhawg8849]

Just put a good set of led foglights in with your projector low beam leds and you will be fine..ive done this for 40k and had no issues.. I do 75% of my driving after dark, photo sensitivity as well as a far sight stig and its very comfortable. Ive almost crutched myself on my truck and cant drive anybody elses after dark...If your worried about people flashing you,having both fog and lows with led cut down on the blinding effect. It would take one ocd picky person to complain about the light spectrum in thus situation. This is however a great video to explain the coverage and light density

[@uhmeizuhngralphf0549]

How long it lasts

[@chach881000]

The bulb might have better light output if you Adjust the bulb vertical instead of horizontal. Most manufacturers recommend they be vertical.

[@cameranhoyt9337]

I have a 2012 Nissan Maxima that comes stock with HID low beams and halogen fog lights and high beams. I was going to upgrade the HID to LED and orient them vertically but I saw a lot of reviews saying that it would cause the beam to have the opposite dead spots compared to this (bright on the sides and dim straight ahead). My HIDs have a slight blue tint that suck when it is wet out. What I did, that I think is the best solution, is I got bright yellow LEDs (the best color for wet roads) for my fog lights and insanely bright white LEDs for my high beams. Now my fog lights travel as far as the low beam while giving the golden glow to show the wet roads better. I highly suggest that strategy if you have projector low beams but reflector fog/high beams

[@seanmurphy1768]

Any advice for orienting 3 sided LED bulbs? My low beams use 2 LEDs and the high beam kicks on the 3rd LED.

[@cameranhoyt9337]

@@seanmurphy1768 I can't say 100% but I would think having the LEDs facing 3 o'clock, 6 o'clock and 9 o'clock would be best. I would think the one facing 6 o'clock would be the high beam and would reflect off the bottom of the housing and be directed upwards to show further down the road. Again, I'm not 100% sure but that is what I would try first if I were doing it

[@bradcliff7099]

@@seanmurphy1768 Yes most review videos say stay away from LED headlights with more than 2 diodes, one on each side of the stem they are attached to. By going with 2 diodes there is one diode hitting each side, left and right side of the reflector inside the housing. The reflectors inside the housing (all that shiny chrome) is curved so it focuses the most light possible as far forward and to each side as it can. So any more than 2 diodes is disrupting they light omitted from the other diodes and are usually inn the "dark areas or the tops and bottoms" of the reflectors. Having more than 2 diodes in the products ad pic is nothing more than click bait to get the shopper to click on the ad, luring them to their page and making them believe with so many diodes they are so much brighter and better. They obviously will be brighter but unable to focus all that light where it needs to be. hope this helps,

[@anavan7]

Cool vid but was looking for reviews on led projector bulbs not led bulbs (360) in projector headlight housings.

[@CarGuy5141]

If it’s a projector then get lasfit la plus series. Works great

[@theeballer6429]

You should give the new DDM Tuning Saber ProX 55 watt Accu/V2 a try. They’re $190, but they replicate the original projector beam pattern and lux output parallels HID lux.

[@gary9182]

Do they throw a code or are they Can bus compatible?

[@theeballer6429]

@@gary9182 For a 2020 Subaru Ascent Premium, the DDM bulbs do not give any error codes.

[@vincechan9635]

I bought the same brand Auxito LED from Amazon and installed in 2012 Lexus IS250. There are dead spots exactly like what you had in your truck. Even the led labeled as 400x brighter. I think only good for reflection headlight. Not satisfied with the result, maybe prefer the ultra bright Halogen bulbs.

[@cjohnson18711ify]

I have the same issue with auxito lights as well..

[@mariomozie2102]

Hey man not bad at all. 👍

[@jessehagenbeck2624]

I have these exact bulbs in my ram and have none of the issues you have I’m guessing because I installed mine differently then you did. I also have these lights in my high beams and my fog lights. Maybe you should have tried rotating them you know using that Allen wrench that comes with the bulbs but you didn’t even try to adjust them you just assumed that you did it correctly.

[@parisu81]

I have pros and cons on LEDs in projector lights, I put NAO EVO LEDs into a 2015 Silverado 3500HD with projector lights and they are amazing, I run NAO in 3 different trucks and light output is amazing, I only buy NAO and Lasfit. I put Lasfit LEDs into my aunt's 2005 Subaru with projector lights and the passenger side projector is dim while the driver side is bright. It's frustrating and I don't know if anyone else has had one projector not put the light out.

[@bradcliff7099]

Check to make sure the projector is in adjustment or aimed correctly. Projectors have a reflector behind that thick lens, and just like aiming or adjusting headlights the projectors reflection device needs to be centered in its dome lens. Otherwise especially with those thick glass lenses it won't allow the light to fully go forward making it appear to be dim. Ever notice when approaching extremely bright lights at night and when they get really close the lights seem to almost lose their brightness? It's because as you approach your eyes focus is basically going to the side of the dome of the glass projector. meaning your eyes are moving away from the focus of the projector. Make sense I hope!?

[@higherthanmost1112]

I went w super bright halogens in my ram and they worked better than the led’s. I just put the led’s in the fog lights and it works great

[@kenfong6373]

Try the New 8-sided LED bulbs - I had the same issue on a Kia Soul with projectors - 20000lm no contest to the stock halogen - Glad I didn't waste the time on silverstar stuff that everyone pushed ..

[@Kaiser187]

I put LEDS in my projectors and they are not good at all. The stock halogens put out way more light. I also put the LEDS in the high beams and fogs which look really good, but not in the low beams. Kinda surprised at how weak they are in the low beams. I have HIDS on my other car and they blow away the LEDS with light output.

[@shadowwolfmandan]

... annd if you read the directions that come with the bulbs they advise a left-right orientation for proper beam pattern.

[@brayanherrera1509]

Hi so I had led lights installed in my Acura TL but when you turn on the low beam and the high beam there to dim i have to turn on the fog lights to see the road at night the car has projector still headlights what could be the problem

[@BoostedMotorsports]

Should switch to the 55w hid kit for your projectors linked here