Check the Pro VLA 2 here: artproaudio.co... MERCHANDISE: teespring.com/... EXTRA CONTENT: / whiteseastudio STUDIO: whiteseastudio...
Пікірлер: 497
@mlwsf3 жыл бұрын
I have 3 ART pieces, including an older version of the Pro VLA, and 20 years later they're all still working great.
@GeekTherapyRadio4 жыл бұрын
I've had this comp for several years. I even bought better tubes...but never installed them. Didn't need to. You will also find this compressor in many, many expensive recording studios in the same rack as 1176's, 165's, etc. You'd be surprised how many word-class engineers love the Pro VLA 2.
@LondonSteveLee2 жыл бұрын
I love using mine as a two stage vocal tracking compressor - ie daily-chain the two channels unlinked both compressing gently - it's very transparent. Had mine 10 years - still perfect.
@theoneandonlybright61452 жыл бұрын
So input 1 going out into input 2, right? :)
@LondonSteveLee2 жыл бұрын
@@theoneandonlybright6145 Yep.
@msb17042 жыл бұрын
this sounds genius cant lie.
@tooniceproductions8798 Жыл бұрын
🤔 I didn't even think to do this. thank you 💡
@MartinLutherMcCoy Жыл бұрын
Just ordered a revive audio modified vla2. This idea never crossed my mind. Thx
@drewbarefoot44284 жыл бұрын
i bought this way back in the day and recorded a friend's EP. Still to this day says it's his favorite record and I know it's because the VLA made his acoustic sound perfect.
@catojrgensen89122 жыл бұрын
Just out of pure interest. Do you remember how you compressed it? What ratio, attack/release, etc. Kind regards
@Fluxwithit3 жыл бұрын
Modded mine with Jensen (api) transformers, burr brown op amps and NOS Sylviania tubes. Future updates are that I may install faster vactrols and install a bias control on the tubes
@pvampman Жыл бұрын
Is it possible to this with the mpa?
@stevefleth4 жыл бұрын
I have the Pro MPA II into the Pro VLA II as my DI's for bass and guitar. ART products are designed in my home town of Rochester, NY but the units are manufactured in China. I've swapped the tubes, 12AX7 in the MPA and 12AT7 in the VLA with EHX matched pairs. The input of the VLA is controlled by adjustable output of the MPA. Sweet sound and clean. Cheaper is bought online in the US.
@ozzy3ml4 жыл бұрын
I've owned both the VLA and the MPA - this one is good, but the MPA is fabulous! The ability to go from subtle and smooth to 'harmonic definition' to full on distortion is so useful. Bit of a Swiss army knife. And...it's high voltage, not starved plate like this compressor :)
@LarsTaylorMusic3 жыл бұрын
I love this thing. Brought 4 singles of mine in the radio with just a GAP PRE 73 (first version) and the ART PRO VLA II in the chain. If somebody can't make good tracks with this, then the problem lies somewhere else...
@TzoHill Жыл бұрын
Do you still use it? Looking to get it to add to my Gap COMP 3A and ART PRO MPA II setup. For Glue and Depth mainly.
@LarsTaylorMusic Жыл бұрын
Sure, every day. It's in my chain on each recording. Gain reduction up to -4db, VU around 0, ratio around 2.5:1 to 4:1 and you are set!@@TzoHill
@LarsTaylorMusic Жыл бұрын
p.s. each track on my youtube channel was tracked with the ART VLA II in the chain.@@TzoHill
@TzoHill Жыл бұрын
@@LarsTaylorMusic u legend, thank you.
@LarsTaylorMusic Жыл бұрын
☺@@TzoHill
@JonnyKaine3 жыл бұрын
nice! I've had one of these for over 10 years and it still works fine, so I guess that says something as far as it being built well.
@ericvon13613 жыл бұрын
A tad bit late on this video, but would really love to see if you ever did any modifications to this unit, and if so a video going over them! Or even possibly discussing ideas for it. This thing has the potential to be incredible, as if it’s not already at its price!
@chinnarciso4 жыл бұрын
Fantastic. I absolutely love hearing you say that it sounds good to your ears. Other people forget that its not the specs sometimes, its the sound. Love your videos. Keep it up
@beepboop62884 жыл бұрын
Had this thing for years and really like it, even when running in bypass it does a nice thing of soaking up some of the muddy low end in tracks in a way that feels quite natural
@Leo9ine Жыл бұрын
Pretty sure that's placebo. Bypass on the VLA is a direct passthrough from input to output. Open it up and look at the board, the bypass buttons are big switches that short the input directly to output. It's no different than a few inches of cable. You're hearing the placebo, 100%
@grsproductions9869 Жыл бұрын
Not in bypass but with no gain reduction. A little input from your DAW fattens the signal just running through it.
@robfernandez5234 Жыл бұрын
We also did the Jensen mod and upgraded tubes, and as the comment below reported, it really grabs. I’d have a hard time replicating an L2A with this thing. Currently using for parallel compression and after a lot of counter intuitive noodling found settings that wouldn’t crush the signal. Now I can say “good stuff”!
@GaragebandandBeyond4 жыл бұрын
YESSSSS!!!!! I have always wondered what you thought about these! Can't wait to watch this one!
@badmonkeymusicproductions35694 жыл бұрын
Mine is modded by Revive. I've sold many more (high end) pieces, but this one stayed. Great comp
@TheIVaneysound4 жыл бұрын
I use it in the Insert master parallel compressor in my SSL Sigma. It adds glue and a little heat in the higher frequencies. I like its sound in this application.
@markpixley40094 жыл бұрын
I've had the original Pro VLA (not version 2) for about 15 years...there's a lot of mods you can do on these, change out the opamp to a Burr Brown etc...some people add transformers, replace all the resistors and caps with better tolerances...but for me I look at its core design...its a starved plate tube design (meaning it simply adds some non-linear distortion into the amplifier path) going into a cheap vactrol for compression... After considering how much work it would be to do the mods and the miniscule amount of change in color the mods would produce I've just left mine alone and use it for what it is, a really cheap vactrol compressor with a low noise floor...for that its excellent.
@JimijaymesProductions4 жыл бұрын
I always thought the VLA was full voltage like the MPA Gold and MPA II.
@ryanpwm4 жыл бұрын
@@JimijaymesProductions the VLAII is full voltage. Technically it is slightly tuned down within it's own circuit. When you look at it its clear that the designers toned down the voltage just a bit, likely to make harmonics easier to come by, but it is by no means a starved plate. But that's not really bad tbh. Everybody's favorite Culture Vulture is technically speaking, a design based on starving the tube with full user control. Starved plate can be just as good as full voltage on certain things. It just matters how it was designed.
@JimijaymesProductions4 жыл бұрын
@@ryanpwm Ahh so the II is but the original isn't, yeah I have used plenty of starved plate designs that work for what they are designed for such as the Maxon 880 Tube Overdrive (its a guitar pedal) which is starved plate but yet changing tubes makes a huge difference because it changes the gain stage feeding the opamp which does most of the clipping, so no it doesn't operate like a tube amp but it sounds very much like a tube amp. I think I will eventually get a VLAII I am pretty happy with plugins atm but if it adds any of the vibe the MPA II has but with compression that would be cool, otherwise maybe the Pro Channel as it has insert points.
@Samos12 Жыл бұрын
@@ryanpwm - "Starved plate" is a term I keep seeing people throw around without actually knowing any facts. I've seen good outboard tube equipment and brands tarnished by what what is essentially starved plate gossip. People will just start saying 'starved plate' it in chats, and it gets repeated, even if it is not a fact...
@flarfadelic56543 жыл бұрын
absolutely LOVE my PRO MPA II + PRO VLA II combo for a home studio! it really hits it out of the park for the applications I'm using them for.
@oliverbahr61574 жыл бұрын
As an every now-and-then Netherlands visitor, I simply love vla. Best served cold, with vanilla taste and plain with no snake oil.
@the1111machi3 жыл бұрын
H O P J E S V L A
@nerdhound58914 жыл бұрын
I have this as well as the MPA II Pre-amp. Even without being modified these devices are awesome!
@DesertCompanion4 жыл бұрын
I love my MPA II. Best bang for your buck out there.
@LaPlant_Mastering4 жыл бұрын
I have Pro VLA 1 for years now. Changed the tubes and I love how it sounds on drums. Great cheap compressor.
@anthonyman80082 жыл бұрын
To what type of tubes?
@robfernandez52344 жыл бұрын
I did the Jensen transformer mod and switched to higher quality matched tubes. Fine compressor, had to learn how to not crush the signal. He’s right, the VUs don’t tell you what you need. The little LED meters below are better.
@htb123times4 жыл бұрын
You wouldn’t happen to know where I can find info for mods do you? I want to get into modding my gear but there’s not really any info on how to go about doing so out there. Any help is appreciated!
@mikecorrado53434 жыл бұрын
@@htb123times if you've never soldered before try out a DIY RE kit. if you have, just get to know the parts you're going to be changing via forums - its very mod dependent finding info
@johnisrael51836 ай бұрын
I just got one along with the Steinberg UR RT 4 Interface...and some better cables for my Mixing Console.....loving it.....sounds great...looks great...for the money........very very great sound and functioning
@GaragebandandBeyond4 жыл бұрын
Can't wait to see what Mods you do!
@lightafluident.99502 жыл бұрын
I love mine. Im only using one channel as of now, and I only incorporate it into the signal when I want some added "grit/color". My main vocal chain is a WA12 MK2 black mic preamp from Warm Audio, followed by an LL2A compressor limiter from Little Labs. I'll usually chain the VLA after the LL2A when I feel like the vocal will benefit from both compressors going.
@trololo_zhirnota4 жыл бұрын
I got the ART MPA GOLD, it's really good for it's price and you can change the bulbs to get a better sound.
@dangelobenjamin4 жыл бұрын
I also use the MPA Gold! Excellent as an input device of course, but I mainly use it as a mixbus sweetener, to add that nice analog feeling to a digital track. It does something very beautiful to the low end.
@raelmickaelbeneteau11253 жыл бұрын
what is the new bulb that you use in yours please?
@MattDxstined3 жыл бұрын
@@raelmickaelbeneteau1125 telefunken are very good
@johnstitt26154 жыл бұрын
I use this sometimes in a guitar pedal and preamp chain with an IR pedal. It is the last piece of gear before it goes into the DAW. Sounds good.
@Bigricky064 жыл бұрын
I got the ART pro channel II tube preamp, compressor and EQ. Sounds very beautiful and warm and i paired it with an Aston spirit condensor microphone. Beautiful sonic relationship. One time i connected my mic directly to the focusrite 2i4 2nd Gen i had and immediately took it off and put the ART Pro Channel back. I immediately understood why people make sure to get good quality preamps.
@martinsnelaudioenhancement4 жыл бұрын
I like how it cleans up the boomyness in the low end en makes the hi end smoother 👌 Could you make a video on how this sounds compared to a comparable plugin?
@1972OGTony4 жыл бұрын
That's more likely your using mediocre converters cause that's what I thought when my interface was a Focusrite 18i20. Once I switched to an RME that changed and the lowend is punchier now. If you even listen to this video you don't hear any loss lowend.
@ryanpwm4 жыл бұрын
@@1972OGTony can attest to that. I've used a motu ultralite and focusrite before getting a modified apogee symphony. I wonder if it's consistent that low end converters have trouble with low end punch. You can see it directly on a frequency analyzer sweep. Only low end converters I know that add punch are Akai's. And that's just bit distortion.
@__prtcl3 жыл бұрын
@@1972OGTony *you’re
@brookbilney7613 жыл бұрын
This is exactly the video i needed. Did you ever get around to doing the mods on that vla 2 ? Im curious to see what you did to it.
@cyorkgo4 жыл бұрын
Keep us posted on the Mods you do to it. Black Lion Audio used to mod these. I have one and was going to mod mine. Pound for pound its a great unit.
@dragonfly_bry3 жыл бұрын
I love everything about mine except the stereo link. I only use dual mono now cuz it doesn't kill the stereo field. Great channel man, keep it up.
@johnnybrit8044 жыл бұрын
My ART VLA II compressor keeps company for my Distressors and Fatsos. It is an excellent optical compressor that incredibly is part of the configuration of large studios. Soon, I would like to buy another unit. It can be a soft compressor or a very aggressive one. I don't recommend it much for the Master Bus, but I recommend that it track and mix individual tracks. A valve is actually there to add some heat to the signal flow, according the review. With regard to valve replacement, this procedure is useless. As the valve is not in the compressor segment it has no more than 1% harmonic distortion. We have already done this by including measurement software at the device output outlet. This is a great compressor to keep original, unless the MOD includes items other than the valve.
@davidjackson83874 жыл бұрын
My Man!! I have the preamp also together with the VLA the sound is great! Your opinion make owning them feel even better. Also that track you're using is Fire!!!!
@LonelyRocker4 жыл бұрын
I've had this for a couple of years and paired it with a Pro MPA2 Preamp. Great outboard gear for the money in a home studio setup for sure. As you discovered, even in a pro setting it doesn't hurt to have one of these lying around...for the money :)
@Madrrrrrrrrrrr4 жыл бұрын
I have 2 of these but put them in storage. Never really used them because I thought I bought cheap stuff. Bought them to be molded but most reviews say mods are too much work and sound doesn’t get much better. And I realized real tubes run on a much higher voltage. So I hope you change my mind so I can uses them again. Can’t wait for the mid video!
@JimijaymesProductions4 жыл бұрын
Love to see the mods, Ive got a Digital MPA which is great and even sounds cool running audio back through it to add a bit of warmth/vibe.
@tukimono Жыл бұрын
when will you show us your modification video??
@voronOsphere4 жыл бұрын
I have the original Pro-VLA. I still use it to add a touch of reduction on the stereo overhead drum mics while recording. Attack & Release are buttons: Fast and Auto. Nothing else. I usually have Attack on Auto and Release on Fast.
@davidallenhammond27774 жыл бұрын
Thanks, it's nice to see the unit get some praise. I have an original Pro VLA for many years and it does a fine job and was really cheap. Because of your review, I'm thinking of getting the VLAII for the stepped controls, recalls would be much easier. Thanks again.
@EgoShredder2 жыл бұрын
2:15 - Always make sure to hold the socket at the same time, to avoid damaging the PCB soldered pads and traces.
@johnnyq1233Ай бұрын
I have the the TPS-II, the Pro VLA II and a Behringer FX-3000 virtualizer in my rack. Just fantastic stuff for the money.
@cursetheserpent4 жыл бұрын
The art compressors are absolutely awesome. I love these things.
@521Life3 жыл бұрын
I’ve heard negative comments about ART products but my experiences with them have only been positive. I use the OctoTube preamp everyday along side high end Preamps. I’ve seen this comp, but wasn’t sure about it. I may take a closer look now.
@boutrosboutrosboutrosboutros8 ай бұрын
great review I am looking at one of these for teh exact reason you stated: to tame the crunchy digital high frequency sounds and warm up the tone of a digital recording for a post mix down
@fabianvasquezjr88523 жыл бұрын
My first outboard rack comp, still got it, still use it, even though I have way better gear now. Works great for cheap!
@therealjackfisher3 жыл бұрын
52 seconds in to the video and I already love it! All I needed to hear to get involved.
@muzk88874 жыл бұрын
love ART stuff, compressor and channel strip. another contender would be the RNC comp and the RNLA which is same price range and a fav and might be worth a review.
@ogasi17982 жыл бұрын
here the art is twice the rnc and 150 more than the rnla
@andrew14794 жыл бұрын
I have a Behringer Tube Compressor T1952. It too was a pleasant surprise. A lovely sounding compressor made even lovelier by replacing the SOVTEK tubes with genuine NOS 1960s Mullard tubes.
@tinman15284 жыл бұрын
A review for the ART PRO MPA II microphone preamp would be great also. I have the PRO MPA II and swapped out the stock China tubes with JJ ECC83-S/12AX7 (short plate) tubes that were matched and balanced (at Eurotubes USA) with a gain factor of 105 and transconductance rating of 18 and it sounds excellent. I can get a very nice pleasing analog "tube" sound. Plus, It has a great signal to noise ratio (low noise). A major bonus is the plate voltage selector. I find that using the "high" plate voltage and "low" plate voltage options gives a nice selection of tube colors when driving the tube circuit into soft clipping (Note: I know exactly what voltage is used for both of those settings and I can tell you that the "high" plate voltage setting is not a starved tube design). The unit also has a variable impedance knob that offers a nice control for certain types of microphones. The ART PRO MPA II is worth checking out. The ART PRO MPA II is an amazing preamp with lots of features and a great sound. I hope to see a review here in the future about it. You may enjoy having the ART PRO MPA II in your studio. I use it for processing audio signals on a regular bases (for both recorded audio files and for live microphone recording as well). Keep up the great work. I always enjoy your reviews.
@RecordingStudio94 жыл бұрын
Been using for a few years with no issues and like you, very impressed with the results myself.
@J-DUB-F14 жыл бұрын
One of THE best QPR's in the industry. Not quite a secret weapon anymore though, people know ;:-) I've always wondered about the gain sensitivity issue. If they come with AT7(mid gain) stock, would swapping in an AU7(low gain) help with to much gain at the input?. Is the tube at the input or output stage??. I'm not a tech so I haven't ever looked at schematics of it. I do know friends that have swapped in either nos Mullard or Sylvania tubes, and they said it was a very nice improvement. They have also swapped out other cheap components that made noticeable improvements, and all for little $$ investment. I've used both stock and modded versions. Stock units already sounds pretty damn good for an under $500 unit......used they're in the $300 range. Modded are even better. I would bet that if someone unboxed it blindfolded and felt it's build quality, had it hooked up, then listened blindfolded....they would say that's a $1000+ compressor, easily!
@G_handle4 жыл бұрын
Imagine a 32-channel (64 Inline) Analog Console (Soundcraft Ghost), with 4-Stereo Sub-Groups into the 2-Bus. Now add 5 VLAs as Mixbus Processors. 64x8x2. Now mod the Desk and the VLA MBPs. Incredibly low noise floor, fairly transparent, butter smooth, yet fully controllable dynamics. This makes a super tight, relatively inexpensive, nearly colorless, nearly noiseless, but totally Analog platform and centerpiece for a modern Hybrid studio. From there, you can engage the 32 4-band, or 64 2-band Console EQs. Then you can insert ANY Colorful Analog Outboard you desire (or own), precisely where you want it, without "muddying up" the entire mix. In this Hybrid Setup: DAW Tracks, 64-Channel Interface, CLEAN Analog Summing, CLEAN Analog Compression, Season to taste, Print the 2-Bus. You can still process everything Before it comes out of the Box, say adding a Tape Emulation across all channels, say adding a Channel Strip Plugin across all channels BEFORE you come out into Actual Channel Strips where you disengage the EQs and just use the Routing and Summing. And if you have the Interface I/O, you can run the Analog Channel Inserts Back into the DAW, add whatever plugins you like, then come back out in series (managing latency of course). You can Parallel Process, and run Effects in your Rack or in your DAW, then back into the desk as Effect Returns or on unused channels. I strayed away from the topic, but the takeaway is that the ART VLAs, whether just one on the Main Bus, or many across all your Busses, is the Cheapest and Cleanest piece I know of for a full featured, versatile Hybrid Mixing system.
@otobotrecords4 жыл бұрын
I used to run a similar setup with an Onyx 32-4 and then an A&H GL Series 8 Bus with full usage of the matrix. It's great to have, but means also a helluva lot more maintenance and need for structuring. Alone the cabling across 4 full sized patchbays, outboard FX and compression and 16 I/O from the DAW weighed about 70 kg. Nowadays I'd run a downsized hybrid setup with a smaller form factor console from A&H or Soundcraft and an additional even smaller headphone mixer.
@G_handle4 жыл бұрын
@@otobotrecords Then you know! I hear you on the "easier approach" available nowadays, I have a few setups, its mostly recall that dictates. But there's nothing quite like spreading your song across the desk, balancing on faders and pans, then EQing tracks against each other with both hands, and no "latency", the Analog flowing through your fingers into your ears. The whole game has evolved. From 24-track 2-inch, into a desk with EQ and Outboard Dynamics, back to 2-track tape. Then DAT tape. Then SSL shoved recall and Dynamics into the board. Then Pro Tools replaced the Tape Machines. Then it all got so cheap and fast that you could kinda do it In The Box. But it wasn't the same. But now we could afford to build our own "Project Studios", no more tape (okay maybe Adat or DA-88s), Live Boards or "Small Format Consoles", then print back in. Somebody started calling it Hybrid. Now with the computers getting faster, and replacing Drum Machines, Sequencers, and Synths (VST VIs) and companies getting better and better at emulation plugins of Analog gear, one day, somebody somewhere, completed the entire process inside of a Mac. And immediately Gear Sluts became like holocaust deniers and said it wasn't "real" whatever the fuck that's supposed to mean. Fast Forward to 2020, and SSL, Neve (both of them), API, Audient, Trident, etc. all have Small Format Consoles, designed to be used in Small Hybrid Studios, and sound better than their old ones for the price of a small car rather than a house. At the same time, In The Box mixing is so respectable now that Most music never leaves the computer, and many of the biggest mixers have switched entirely to digital and plugins. And, for me, the Console 1 system, combined with UAD integration and near zero latency, FEELS the most like mixing Analog so far. In some ways even better, for instance switching between 20 channels at a time in say a 100 channel mix, rather than sliding a chair all the way left or right, tweaking, then sliding back to listen. Now its 5 bank pushes, pick a channel, never leave the sweet spot, and every channel strip comes to my fingers. So why fuck with an Analog Desk, or hundreds-of-pounds and thousands-of-dollars of Mogami, and patchbays, and soldering, and all the other gear, when you could just load a DAW, add some plugins, and grab a mouse. I don't know. Maybe I'm just stupid. But I'm not alone.
@G_handle4 жыл бұрын
@@otobotrecords BTW, never used the Onyx, but the Mackie 8-Bus changed the game back in the day. All the power of a real inline studio Console. But then I heard the Soundcraft Ghost, and instantly fell in love. It was like having a girlfriend, and everything is going fine, but then you meet HER, and everything changes. She's down for anything and can do things you never even thought about. She's got that sexy British accent that makes your girlfriend sound so plain and now annoying all the sudden.
@G_handle4 жыл бұрын
@@otobotrecords Annnndddd ....to me, the Allen & Heath GLs were.... logical...and flexible, I knew a couple of dudes that had em, I really liked the stereo channels rather than using two of my 32, but I didn't like that it wasn't inline, and you couldn't split the EQs. (Also, both roll off at 100 which is limiting). But the key difference to me, once you laid everything out across the board, set your routing, got your levels and pans into a solid static mix where you could hear "the song". That's when I engage the EQs, and the real difference between all consoles reveals itself. How do the manipulate the sound? What of their Own sound gets added to the track in the process? In my mind, the Allen & Heath EQs sounded much better than the Mackie's. But it sounded like a dude. A dude's mixer for dude music, like rock etc. The Soundcraft EQs felt like poor man's Neves. Voluptuous, soft, round, thick, smooth. Getting a kick, snare, and a bass to play together was like a menage a troix. Everything just feels right. In contrast, mixing in the box can feel like having sex in an exam room with all the lights on.
@lushkordz66434 жыл бұрын
I bought mine 250 bucks (2nd hand) N I use it for listening tracks on my Fostex PM0.5 monitoring speakers ...I put some TAD Premium ECC83 tubes in it N I got a much more punchy sound with more presence on high-mids/high-end frequencies N more snappy low-end ...the warmth that it gives to your monitoring experience is juuuust huuuugeeee ....I use the builtin ONYX preamps on my Mackie VLZ4 mixer to drive the ART Komp harder if needed with a low gain signal ...it add some beefy tone ^^ the VLA Komp is inserted in the SubMix (Alt 3/4) of the mixer to get an alternative routing of the MainMix
@AtTheSourceStudios4 жыл бұрын
Hell yeah bro this was my first piece of analog gear and I still love it. Actually got a second for other instruments too. Great as a mix bus compressor as well as guitars and drums just really nice and like you said the way it treats the highs is very musical and smooth. Looking forward to your next videos on it!!
@CraftWon4 жыл бұрын
Is it good for vocals? And bass?
@AtTheSourceStudios4 жыл бұрын
@@CraftWon yes! Great for both.
@AURAmusik.3 жыл бұрын
Just got mine and noticed that the signal from channel 2 can be heard on channel 1, it’s not loud but you can hear it when you solo that channel In the daw. i don’t have stereo link on when this happens. Is this normal behavior?
@AtTheSourceStudios3 жыл бұрын
@@AURAmusik. double check all your panning.
@chroniclejaws99264 жыл бұрын
I'm an introvert who barely interacts on social media but I just wanted to say your vids are dope.
@OdinOfficialEmcee3 жыл бұрын
I can't wait to see what alterations he makes to the unit and if it can become even better!
@LoveAudioProduction4 жыл бұрын
I love the track you used to demo it too! Super funky 😊
@garyfox84 жыл бұрын
I have this and a couple of the ART Pro Channel 2 channel strips. I run signal from the pre amp of the Pro Channels to the VLA, then back to the Pro Channels, which have their own compression and eq. This lets me layer my compression, the VLA tames the peaks, then the Pro Channel compresses a little more before the EQ. For a home project studio, ART provides great products at a great price.
@sTVG24 жыл бұрын
please make a video of the DIY upgrade mods when you do them (I am excited to see it)!
@Faithaven3 жыл бұрын
So want to see this
@dedaluz1004 жыл бұрын
Certain subtleties are for professionals and not always a result is an end in itself, but it is congenial to a chain of results that the professional considers positive. I do not express myself on its quality as a professional in the sector, but as an amateur I have had it and it has not impressed me more than other virtual plugins ( P.S. The gain calibration - from the knob - of the stereo channels I had to do it every time I turned it on and it was tedious)
@smpiggystudio4 жыл бұрын
I have one, but one day its left channel start to cracking, maybe the tube inside just ended up. It definitely worth the price, I was pretty enjoying listen from it before it broken.
@mrnelsonius56314 жыл бұрын
When my band first switched to in-ears, we didn’t have any kind of board or preamp driving our mic lines, just straight into individual wireless transmitters. Went on tour, not enough volume, so I bought a $50 ART Tube Preamp box at Guitar Center to bring my mic to line level. It actually sounded great, but there wasn’t proper limiting so I got my ears in serious trouble with our drummers snare in a tight space. Probably damaged my hearing (no fault of the Art, my whole setup was duct tape rigged). We have proper gear now thank god
@christdolphin69 Жыл бұрын
love this thing. bought matched Mullard 12AT7's to replace the stock tubes. not sure that's even supposed to be an improvement, but sounds incredible on my stereo bus
@TecDruid3 жыл бұрын
I do some Experiment by routing my Music out to some DAP Gig14 Mixer. The Mixer has the Art Studio V3 Preamp as Aux Send in Mono. So i try out to get some real tube Warmth to my digital Track. By adding the Tube Preamp to a 2nd chan. Setting of the amp was to the Valve mode. And i have to say it is very interesting. I did some Eqing with the Mixer too. Just ad some Mid and highs. Record it back and do some Eqing with the Puigtec EQ - the Result was i had a much better warmer Lowend but the High and Mid was not so "in to face" like on the Digital version - i actualy do like what happend to the mix it sounds more like "one piece". And on louder Volume it is much more friendly to hear. You can hear it in my examples i share. But i cannot decide if it sounds better - it sounds different i would say "warmer". And i like it. And the Puitec (i testet it) did a very nice Warmth to both! But on the analog track the warmth was much better. Like "you can just eq what is in there". And yes - Its Cheep gear, not created for mastering. But thats the only way i can do the Experiment without latency. The Preamp ist able to push out great Lowend and rich up the Mono Signal. So in the end it was mixed to 30% to the original Track. If you want to check out the difference here you find the both Tracks one direkt out of DAW (without Puigtec) the other like i described. I was very impressed by it what the little Tube Preamp in combination with the waves plugin actually can do to the Sound! But i do not have a 2nd for trying it out as Master Saturation FX. Would be a nice experiment for some one who got 2 of these Preamps. Becourse i realy like how that Art Preamp warm up the Sound on valve mode - what ever goes thru sound much more full in the lowend but not every Setting is good. If you like to listen the the result check it out: 1drv.ms/u/s!Aju1Kk8j30JojziF20RBwXq8WRrh?e=AAo7K0
@everybodyhasoul54383 жыл бұрын
Really enjoying the Sandstorm remix you played at 5:26.
@mostvaluablepropertiesinc8206 Жыл бұрын
This beat is so smooth I zoned out n kept 10 sec back n 4got 2 pay attention 2 wat u were supposed 2 do lolol
@fugoo41004 жыл бұрын
The only worthwhile mods I decided on for the money and I have both VLA 1 & VLA 2 is tubes for QA and changing the optical sensor for slightly quicker attack times if needed. Great units my VLA 1 uses better Gold Lion 12AX7 tubes while the VLA 2 uses JJ Audio 12AU7 tubes with better optical sensor. A few more mods out there but for the time and money I buy something else as the VLA as a stock unit is pretty good already.
@666Ekinox4 жыл бұрын
I have the art pro mpa2 for 5 years now, and I enjoy it alot, on electric and accoustic guitars and also bass!
@markmoore94554 жыл бұрын
I've been using a ART Tube Pac for years now on recording acoustic guitars. It sounds great.
@TheRealDirtySkillz3 жыл бұрын
Preamp?
@DrBrunoDzogovic2 жыл бұрын
I don't even know why people call the Art Pro VLA a "tube compressor" when it's clearly stated that the tubes are utilized at the gain stage. The sound coloring we get is a pure distortion added as a result to pushing the signal hotter and not resulting from the compression itself. It's good for guitars, vocals also and bass. I personally use it for orchestra and piano to give them some additional presence without using saturation, but the unit is very versatile especially considering the price.
@joesalyers4 жыл бұрын
I have the ART PWM pulse width modulation compressor Called the "Dual Limiter" in my bands live rig and it is an amazing little compressor for the price. The "ART Transy" is ART's FET compressor is my bass players go to compressor in his rack. He replaced an old DBX 160xt he had for 10 years and it is a really nice stereo FET compressor for $500 dollars Ive been considering one for while now for the studio.
@thimovijfschaft32714 жыл бұрын
I'm planning on getting this thing as my first analog compressor when I have my own homestudio. En als Nederlander vind ik het grappig dat het "VLA" in de naam heeft :)
@alphaoscillator4 жыл бұрын
nekkerspoel
@rosendokingsale69754 жыл бұрын
Ik zal dat ook doen
@MarlonKingShow Жыл бұрын
Thanks for the review. Very interested in wither this or a 1177 clone, still undecided what is best for £500 or less... Guess this gets you 2 channels instead of one and some tube goodness so a lot more than just a clone.
@johnisrael51836 ай бұрын
Now that Im working with this....man...this is great.........your not gona beat it for money...its a $1000 sounding Comp for $400
@andorvanreevenmusic81234 жыл бұрын
Got one also, in big studio's you can find this one as well... Or as you say it ass swell 🤣🤘🏻
@djontheweather2 жыл бұрын
debating buying one right now. appreciate the honest review!
@TRC_PNW3 жыл бұрын
"A brand called China" :D I have two ART TubeOpto 8s and love them. So handy to be able to use the adat inputs as converters to analog outputs all the while using the analog inputs to adat simultaneously.
@TRC_PNW3 жыл бұрын
Plus, they sound good. Prefer the sound of the mic pres on drums versus say, an 8m, which is what I'm piping their adat to. Punchier, more character.
@SaturnVoyager113 жыл бұрын
It reminds me the Millennia TCL-2 which I love so much. Optical Compression with tube or FET stage coloration. Nice video
@kosycat14 жыл бұрын
I love it. I have mine sitting on my toms at the moment coming from my ludwig classic maples with 421's through the warm wa412
@marcosaruca52832 жыл бұрын
That kick sound very good when it was over driven.....would sound great on overheads
@Leo_Vulkan4 жыл бұрын
IMO is not a bad stereo comp for the price. It can improve a lot the transients with a good pair of tubes like Telefunken but those are almost half or at least a third of its price. Also lacks sidechain filtering (altghough there is a mod through internet to implement it).
@FreeGenerationtv8 ай бұрын
thanks for the video, In my opinion the low-end of the pro valve is not good, it farts a bit in the low end but other than that its good really compressor.
@TheChromaticz3554 жыл бұрын
I bought the voice channel and i have the manley voxbox! Except for the vocals where i find the manley to be more “responsive” , everything else get recorded on the art voice channel! I also tried its eq by recording stereo channels passing one by one and im thinking buying another one for stereo setup! Great company !!!
@daviddurden839128 күн бұрын
I used this device for drums and the master. The H Comp from Waves sounded the same. That's why I sold this device. Save your money!!!
@puffoley244 жыл бұрын
You can install jensen transformer very easily and replace the tubes and this compressor sounds pretty good.It´ll bring the price to around 1000$.
@printlab384 жыл бұрын
yess please do an upgrade vid/tutorial if you could. I have one and unfortunately it has balance issues in stereo mode. hopefully an easy fix when i get around to opening it up. would also love to see a review of the KT pultec. thanks as always.
@scottjarvie80154 жыл бұрын
I've had one of these forever, I can always find a use for it
@telogic14 жыл бұрын
There is really good upgrade by JJ audio that makes it 100 x better quality
@nerdwithacid48328 ай бұрын
I did some mods, and still not sure what to think of it. Changed the vactrols for vtl5c1, matched tubes (803s) hmmmm mwah,, anyway the biggest changes came after matching up parts before the vactrol, using all 1% resistors and matched 2n4403’s. Quite a precise job, but finally it’s getting in the useful range (stereo use with link disabled) that vactrol stage is sloppy, get that right. Still the potentiometers are quite horrible and need some fine tuning. Anyway three days of work (hobbyists in spare time) it now does what it supposed to do in the first time. So please notice that this is quite the sloppy machine that does not do “magic” or something, and it does give u extra stereo simply due to the mismatch channels and all other things that are mismatched. So if the unit is all factory-new it’s not worth it, if u have spare time (and are extremely hardheaded I guess) one can get quite close to a decent machine. Still waiting indeed for wietses video about this device 😊 greets
@macDaddy1118 Жыл бұрын
ART makes good outboard gear in general. I havent tried any of their other products so i can speak on that but their outboard stuff is just as good as a piece of equipment 300 dollars more. Ive had mine for 5 years so far with no issue so its looking like it has good longevity too
@andytullis87363 жыл бұрын
In Cubase you can set the in the input gain when used as an external gear.
@thebarf92352 жыл бұрын
I'm glad to see Garth is doing well and reviewing audio gear. 9:26 Wonder what Wayne is doing nowadays?
@lafoudrepasslafoudrepass52382 жыл бұрын
I like how clean it sounds
@HomeStudioRescue4 жыл бұрын
The ART two-channel preamp is pretty kick ass too. It's great on room mics. Can't beat it for the price!
@intromix2 жыл бұрын
If that’s the ART tps I got one and yeah it is pretty bad ass esp for the price
@DarrenForbes4 жыл бұрын
I can’t wait to see what you are going to do with this unit!
@codyvenne24164 жыл бұрын
I've had mine for 4 yrs now. solid compressor for the money
@coyoteserranoband2 жыл бұрын
Dang? Maybe I should return mine..might get that empirical labs mic pre and compressor now. 4x as much.
@AirArtStudiosOfficial3 жыл бұрын
I live this little compressor, it sounds innocent
@warrenwilcock81833 жыл бұрын
Mine's in the mail! Would love to see what mods you've done to yours
@davidjacobsen19033 жыл бұрын
the mods (which are on the internet under mods for Pro VLA) get you out of "glue" to "transparent" an the harmonic distortion then becomes pleasant