Keep building that 196. I have one one on my bt200x that will get me going to around 60 and I'm 200 pounds. I made it a 2 seater and I know it will go 50 with me and my wife both on it, not saying that is something anybody should be doing but that 196 hauls. They're not just boat anchors. Great video as usual 👍
@Black668 ай бұрын
Thanks! I like the Bt200x . Check out the video coming this Wednesday on this bike.
@Stupidposts16 күн бұрын
What all did you do to it
@PalmAveMinis8 ай бұрын
will you ever get into big blocks like the 301/420 or 440 duromax could be far in the future but just asking
@davidpearson80438 ай бұрын
Best series yet, thanks!
@Black668 ай бұрын
Thanks for watching!
@Callofdutyjoey8 ай бұрын
@@Black66you should put a smaller sprocket in the rear if you have one that will fit. The b200r that I have went around 50 top speed with the stock carb, governor, rod and flywheel. I just took the chain driven jackshaft off and put a straight chain to the 50 tooth rear sprocket while keeping the original 10 tooth clutch. Love the vids!
@mlindsay5278 ай бұрын
I really enjoy your videos, I’ve watched most of them, some of them several times. I’d like to see a tachometer on your top speed runs. RPM data is valuable when making decisions on sprocket selection.
@daxfitz8 ай бұрын
Please do a video on the B100!
@mlindsay5278 ай бұрын
Try adding some thin washers to the roller assemblies in the Juggernaut with the goal of reducing the engagement 2-300 rpms. This should allow the Juggernaut to shift into a higher range on the top speed run. Might need to go back to the 50 tooth to make up for the lower engagement rpms on the 0-30, but the wider operating range on the Juggernaut might improve performance.
@Black668 ай бұрын
I have added a juggernaut tuner kit on one of the bikes.Its in the CT200U-EX playlist. In the video coming out Wednesday the bike does much better with the Juggernaut because of the internal engine mods and the added RPM potential of the engine. It really picks up on the top end. A lot of the combos on the bikes only stay that way for a short time and then I switch it out for something else just for fun to see what will happen. Thanks for watching the videos! kzbin.info/www/bejne/ioO6Xmh_lrR8fbs
@peterpadelsky86Ай бұрын
Love it! I've got a the 200u with a stage 1 kit and torque converter. I chickened out at 47mph haha! Still fully governed.
@Black66Ай бұрын
Awesome! Check out the B200 playlist for the modded 196 kzbin.info/www/bejne/b4XOXqdnbLJgrdk
@peterpadelsky86Ай бұрын
@@Black66 watched all of them bro
@jakedrew73658 ай бұрын
Great series of mods. Thanks.
@NubsWithGuns8 ай бұрын
This bike is making me consider having my Mega Moto powder coated red eventually.
@randomweirdo44674 ай бұрын
Not trying to tell you what to do or anything but the MM80 looks sick in OD green. The black seat and engine create a cool contrast against the OD.
@SpACeCruizeR2o38 ай бұрын
Ya kno I got my kp mini on the way but man I still wanna get my hands on that b200 rsv frame and swingarm 💪🏼💯💨💨💨💨 good flex up
@Black668 ай бұрын
Video coming out on the RSV soon!
@SpACeCruizeR2o38 ай бұрын
@Black66 can't wait boss and it's black too
@Black668 ай бұрын
@@SpACeCruizeR2o3Yes, camo and black
@SpACeCruizeR2o38 ай бұрын
@Black66 that's fire I'm def gonna get a fresh one ✨️
@SpACeCruizeR2o38 ай бұрын
@Black66 you think a wildcat will be a good match up or tilly 265
@SergioM.698 ай бұрын
sickk ! 🔥
@kevinclear40078 ай бұрын
Interesting stuff
@heatcheck24263 ай бұрын
Can I get a parts list so I can do everything you did to your bike please? Thanks again for these awesome videos. Would like to see more of the B200 in the future. I got one because of your videos!
@Shipshowsuper5 ай бұрын
oh thats a sweet little ride. i have a b200 as well. for the life of me i cant find the proper belt part number for it. would you have any suggestions?
@mikey.mike.8 ай бұрын
What app do you use to track you times? Also, just picked up a B200 based on your videos!
@Black665 ай бұрын
I use a Dragy performance meter for 0 to 30 and digiHUD on the phone for top speed.
@houseoffire728 ай бұрын
Nothing wrong with them 196's. Cant wait to see a stage 4 build... You know you want too🤣🤣🤣 Any tips on building a vintage Briggs 5hp?
@Black668 ай бұрын
Check out the billet build on this bike . The video comes out Wednesday . Yes, I have a 5 hp I'll do some videos on sooner or later. We used to race the 5hp Briggs on karts back in the day.
@houseoffire728 ай бұрын
@@Black66 Sounds good. Appreciate it.
@jakekelleycustoms4 күн бұрын
Hi I have a Coleman b200 rsv the full suspension cvt factory bike. I’ve got a stage one kit air filter larger jet and header pipe to slip on muffler. Would I benefit to having a juggernaut over standard 30 series driver. For context I trail ride rarely get to top speed. Never breaks 5000 rpm highest it’s gone is 4900. My governor is zip tied.
@Black664 күн бұрын
Check out this video I did a couple years ago on a mildly modified 196 and a Juggernaut kzbin.info/www/bejne/amrIkntmjbJggZo
@wyattmoore21057 ай бұрын
Will a torque converter kit work with the jackshaft setup? Just picked one of these bikes up and cant find much info about it🤔
@Black667 ай бұрын
You need to remove the jackshaft to install the torque converter. Check out the B200 playlist for the torque converter set up. kzbin.info/www/bejne/oJvXl3Wfqqh5ha8
@scottjoy20948 ай бұрын
Wonder if you ran some VP racing 94 octane in it if you could gain more speed out of it ?
@randomweirdo44674 ай бұрын
Screw that consult page 10 of your Coleman manual concerning gas methanol blends. "This engine can use gas/methanol blend if methanol does not exceed 5%". Guaranteed power right there.
@raypowell52682 сағат бұрын
What exhaust is that? Where did you buy it from?
@Black6657 минут бұрын
Check out the B200 playlist for the exhaust build kzbin.info/www/bejne/g2TPnYmAZ9-DrNU
@juan86298 ай бұрын
I love the video’s but what setup is your fastest
@Black668 ай бұрын
Thanks! The QS138 electric bike or the 263 GTS bike are the fastest so far. . I haven't put out the speed run on the GTS bike yet.
@Samuel-ib6ze8 ай бұрын
Compare a pwk28 and a 33mm mikuni pumper carb
@Mo-gb6rp7 ай бұрын
What’s all the mods you’ve done to this bike? Need a list.
@Black667 ай бұрын
Check out the B200 playlist for all the mods on this bike kzbin.info/www/bejne/oJvXl3Wfqqh5ha8
@prodTT1K5 ай бұрын
Where can I get a 42 rear sprocket for the b200
@yakbranson8 ай бұрын
You say only external mods and immediately say you got inside and removed the governor 🤔
@Black668 ай бұрын
I would say internal mods and governor removal are two different things. Internal mods would be billet rod, cam etc.
@jasonrobinson536618 күн бұрын
Is that the 35mm or 45mm axle key?
@the_gerb7 ай бұрын
B100 next
@BradFFA5 ай бұрын
Idk what’s wrong with mine I took gov out put 26 pound springs and vm22 carb and put a juggernaut converter on it and it goes 40 mph
@Black665 ай бұрын
I think its gearing on this bike. Check out the B200 playlist for the entire 196 engine build. kzbin.info/www/bejne/b4XOXqdnbLJgrdk
@BradFFA5 ай бұрын
@@Black66 speed isn’t great and the torque isn’t knock ur socks off or even close to a wheelie. It’s got the 50 tooth whatever comes stock on them. I’m thinking about trying a 60 for off roading and some sit you back torq if it will do it haha. My straight chain bikes have more off the line then this one
@koabear69268 ай бұрын
Can you do a 223 wildcat build?
@Black668 ай бұрын
Yes, I would like to.
@koabear69268 ай бұрын
Would it be soon or what?
@lesterthornton38598 ай бұрын
Timing advance key is another external mod
@billwilliamson98428 ай бұрын
be curious to see how many degrees actually help and how much hurt on these stock cam engines.
@Black668 ай бұрын
Yes, true but I am gonna skip ahead and do the build. The video comes out Wednesday the 20th.
@jacobsmartialarts3 ай бұрын
What belt is that?
@darrellnichter98948 ай бұрын
Anyone ever slap a good head on a stock motor? Just curious 🤔
@Black668 ай бұрын
I have a few GX160 videos. Check out the playlist.
@robertbailey23428 ай бұрын
Do you prefer straight chain or tourqe converter?
@Black668 ай бұрын
I like straight chain for the small tire bikes and a torque converter for the big bikes. Its hard on the clutch with the tall tires on the big bikes,especially if you are a heavier rider.
@johnfontenot50158 ай бұрын
will it go any faster if I have everything just stock with a torque converter plus the Juggernaut ?
@Black668 ай бұрын
Check out the B200 playlist for this bike mildly modded with a juggernaut. kzbin.info/www/bejne/ppfaiIqtdryGna8