I put a Shred Head on the Coleman mini bike!

I put a Shred Head on the Coleman mini bike!
Installed a GoPowerSports Shred head on the Predator 212 powered Coleman CT200U-EX mini bike. Tested the bike from 0 to 30 and top speed.
212 Ghost kart racing engine playlist - • 212 Ghost VS 206 Brigg...
Mega moto e-bike playlist - • Raced the QS120 e-bike...
Predator 224 playlist - • Predator 224 gets a 26...
Mega moto performance playlist - • Mega Moto 80/105 unbox...
Bonanza minibike playlist - • 1.3 ratio rockers vers...
Coleman cc100x Predator 212 playlist - • Free Predator 212 perf...
Road rebel go kart playlist - • Kart vs scare chair / ...
Coleman cc100x/DB003 minibike micro bike playlist - • Will a Trumpet exhaust...
Coleman cc100x playlist - • Coleman CC100x Minibik...
Doodlebug playlist - • Is the Doodlebug minib...
Coleman CT200U-EX playlist - • Coleman CT200U EX mini...
Azusa minibike playlist - • Is a Ghost faster with...
Coleman CT200U playlist - • Coleman CT200U minibik...
Predator /Tillotson playlist - • Free Predator 212 perf...
Minibike playlist - • Mega Moto 212 goes 60 ...
Subscribe for more minibike content: www.youtube.co...
Instagram - Doubledown555Black66
Don't forget to leave a comment to let me know if you enjoyed this video! :)
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos.
Black66 does not take any responsibility for injuries or equipment failure created by doing so. The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result.
ALL BLACK66 CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.

[@jameswatkins3620]

Awesome video i currently have a ghost and all the mods i have done to it is because of you👌🙏 thanks for always giving accurate info and taking your time to explain.

[@Black66]

Thanks! Happy the videos helped you out!

[@GoPowerSports]

Great Video! Everyone needs a Shred Head in their life.

[@Cereal_Killr]

ordering mine now...YOLO!

[@LousPanda]

YO THERE IN HERE!!! I buy all of my minibike parts from you guys!!

[@devonfalcon559]

Black66 got me into the mini bike hobby got 3 mini now cause of this dude. Learned everything from his videos. Thanks black66

[@tmscam5115]

Man let me tell u he shows signs of much examples

[@AnGryCruizer]

I know its alotta testing and tuning till you get that magic just right he taught me everything I know

[@bryankemp7159]

Another great video! Let’s get this channel to 100k, he deserves it

[@Black66]

Thanks!! Its getting there .

[@carvedfrombillet5421]

The Shredder head needs a bigger carb! Its designed for a PZ27 carb and outflows every other cast head except the EVO.

[@AnGryCruizer]

Would that work on a ducar hemi

[@Cereal_Killr]

@@AnGryCruizer yeah. ducar is basically tillotson.

[@gregswafford9839]

Add that spacer back in between the carb and the head and see if you see some more gains. I may just have to order one of these, seems like its money well spent and might help me get that gain I need to hit my goal of 60mph. Another great video, thanks again.

[@dekriecastle-cook327]

Yea I think there's more torque to be had with that spacer

[@mr03mach12]

Mr black 66 what camshaft are you running in that beast ?

[@Black66]

275 cam

[@sincityconservative8268]

@black66 we have a big outlaw race we are getting people signed up for. Racebikes, E-bikes, nitro, gears, anything under 500cc. You interested?

[@Black66]

Maybe...can you email me?

[@sincityconservative8268]

@@Black66 what’s your email?

[@BetterAnthonySpano]

“And it’s always fun drilling stuff”. Your right man you are right

[@dylanmilford8802]

I just watched one of your predator motor swaps and I want to swap the original motor out of a Coleman ct100u and I’m curious what clutch you used for the predator 212 shaft

[@Black66]

3/4

[@mr03mach12]

I would like to see one of those great videos of the shred head verse the 224 head

[@rogermcdonald1607]

Nice video David! Im always ready to see what you do next!👍🇺🇸🎥

[@Black66]

Thanks for watching the videos!

[@xxjoexxgaming8720]

Hey Black 66 what is the best Head in your opinion? wildcat? shred head? or any other one?

[@Black66]

I really like the Shred head, especially for the cost. The Evolution head is also a good head but it cost more.

[@rgbigdog]

You should do a test with the intake runner to see if you get a better 0-30 timer. A longer intake runner usually means you get better bottom end torque and that should give you a quicker start. See if you can port match it with the head and carb.

[@dekriecastle-cook327]

I agree 💯

[@KfromtheBAY]

Where did you get the pipe from????

[@Black66]

Made the pipe from an existing pipe. Check out the CT200U-EX playlist.

[@NONAME-kw3pu]

WHAT IS PERFECT JETTING??? IN WHAT CARB? AT 3700FT? im at abt the same elevation on temp desert and my patience is.... so pls tell what size main and idle jet to be "Perfect jetting"?????? pls repond. shdve been stated.... i got perfect jetting AT 3700 ft with....xx Main Jet... and xx Idle Jet . thx

[@xxjoexxgaming8720]

So all of these bikes basically have the same engine stock for Coleman just different bodies frames like the EX,and CT 200 U and the BTX, and perform the same overall, unless you mes with the hp like engine swap basically?

[@DarkWolfForza]

Hey I rewatch your 70mph predator 224cc build and I was wanting to know if you could tell me all the upgrade parts you used to build the engine

[@Black66]

Check out the 224 playlist. It shows the entire build .

[@DarkWolfForza]

@@Black66 okay ty :).

[@RevelationsInMotion-v9t]

Hows it going boss. Just wanted to say i appreciate your fascinating content and that i might have passed you by and waved today by the kingman library. Wanted to give a shoutout but didnt want impeded on what you were doing. Anyways. Enjoy your day and keep the content rolling.

[@justbored9906]

What size head gasket did you run on this?

[@koltonoxley3529]

Thank you for the info! I just ordered one for myself! I'm just wondering if you are running a shorter rod on this bottom end or stock length? I have a 212 hemi block and bottom end with a stock length rod and I'm wondering with this shred head if I need more head gasket than. 010 to get .040 piston to head clearance? I can't tell if the piston is at TDC in the video or not

[@dekriecastle-cook327]

I'd be curious seeing a comparison between the carb mounted directly like that and with the extended intake tube. I would imagine it affects you torque level quite a bit by removing the extension. Cool project brother.

[@Cereal_Killr]

Been debating on a new head for my 212e... Think you just showed me what I need for a lil more out of my Tilly MM212 combo. Thanks for your time and info on this one! Think Im ready to do my first major mod on my Tillotson and for a decent price too! Which cam is your bike running here? ...did'nt hear you mention it.

[@Black66]

The shred head is a great head for solid gains for sure! The bike was running a 275 cam in this video.

[@tommyau4244]

Hello sir, I saw on Amazon that they sell electric start 212cc engine with shaft diameter 20 mm, does it fit the torque converter kit ?

[@kevingoon2747]

Did u realize if the carburetor lost performance without the manifold.

[@nszabados]

definitely need to get a bolt on head for the tillotson! either the shred head or a wc946

[@justinkelley2800]

Can I send you my mini bike and I’ll pay for whatever I need I just need someone to build me a bike 😂 need that 65 mph

[@devonortega672]

You using rockets with this, that speed seems slow compared to what ive seen is that just your gearing?

[@francisthompson3490]

I don’t know if you’ve done it, but how about doing a video before and after head port and polish.

[@manuelherrera2243]

How can I get a black66 decal?

[@Black66]

Email the address you want me to send it to.

[@gloriabauer2392]

Watching you here in Colorado, another great video !

[@Black66]

Awesome! Thank you!

[@conley_v5848]

How would the steel valve one compare with this one?

[@Black66]

This is the steel valve version with the 26lb springs .

[@conley_v5848]

@@Black66oh ok, thanks!

[@andrewkuhtz]

Looks like a killer head for the price! Thanks for the comparison video👍

[@GooseGosselin]

Do you mind if I ask what speedometer app you are using? Apologies if you've covered it already, I'm new here but love your channel, thank you!

[@Black66]

I use a Dragy performance meter for 0 to 30 and digiHUD app on the phone for top speed .

[@GooseGosselin]

@@Black66 Thank you! I bought a pair of Coleman CT200U-EXs and you've got me started on performance mods. Those will come in handy!

[@bryanbornnheim8494]

This is my Favorite youtube channel! Thanks for what you do! Got one of these and can't decide what motor to put it on. It's either going on my hemi with the wiseco piston/rod combo and mongoose272 or my hemi with the 58mm stroker kit and 265 cam that already has a 225rs head. Decisions Decisions. Thanks again for the channel and how you are so detailed.

[@Black66]

Thanks for watching!

[@Oleman72]

Okay you sold me dang it😂

[@johnnytrevino1790]

Where can I find the disc brake drum for 6” Astro rim?

[@AnGryCruizer]

Would this work on a ducar212

[@bigblockmaro1]

I’ll be getting one of those!

[@huntintherut4432]

awesome another great video

[@jamesgravel7755]

Nice. I didn’t think it was gona be that much. Guess I’m buying a shred head. Damn it black. Lol

[@Black66]

LOL it truly is a great head for the money! I was surprised of the gains myself.

[@gavinpalacios6750]

@black66 you have made me love minibikes and im finally getting a coleman cc100x tomorrow

[@Black66]

Awesome!

[@hellheart1993]

That's cool. Is that head like a stage 3 4 or 5 part? Im not at that level yet but I wanna be. Hello From Philadelphia

[@Black66]

HI! They have a couple different versions of the head. You can use the one I used in the video with the steel valves and automotive style retainers or when you are ready to step it up they have the stainless steel valve version with the titanium retainers for the higher lift set ups.

[@jaydenbrown3314]

My mikuni vm22 is leaking gas’s from the hose at the bottom and when i mange to get it started it will die when i give it gas any tips at all would be appreciated

[@bryanbornnheim8494]

Float is stuck..

[@KfromtheBAY]

$250 for the stainless 😵. Which did you get?

[@NVScrapper]

I think he got the steel with the 26lbs springs

[@NONAME-kw3pu]

now... port the head ... some and try it again. not a massive hog out but something a normal person cld do with ebay grinder in an hour or 2. polish exhaust if want to. the bearded gentleman, Not Fidel, got 2 hp at full song with stock ported hemi head on his dyno at 7700 rpm; where he had JB weld failure from grinding the roof of the head too thin. the head is kinda thin tween the roof of the port and the well next to spring perch... the "well" tween spring perch and side casing of the head ~4mm? some fill that area with epoxy? the head would have to be CLEAN, CLEAN (Brake) cleaned (NEW?) head clean for the epoxy to hold. even new head probably has machining oil coating of it from drilling/tapping/milling of the head at factory... so ... brake cleaner to clean it out of machining oil before epoxy the "well" tween spring perch and outer wall of cyl head? nice vid we love to see them. keep em coming.

[@BetterAnthonySpano]

Hey how do you have the gas tank running? Did you drill holes in the fake tank and fit a smaller one inside it. That’s what I think I’m gonna do for my baja build coming soon

[@johnsmith-zd5he]

Update info for those into this! I just put this head on my tilly 212 265 banzai cam, big header pipe, billet rod flywheel build. If you use champion X rockers you will need to clearance the valve cover otherwise when you bolt it down it will hold your valves open just enough to where it wont start lol. But i put my vm22 carb back on and it ran about the same as with the stock head and small header pipe. I then installed a nibbi 24mm and wow!!!! Whole different animal all the way from idle to god knows when it will stop revving hahahha!! Massive improvement, but it does need a bigger carb than a vm22 for the gains. And who knows maybe a 26mm or 28mm would make more? I live at an elevation of around 1000 feet and by the time i was dialed in i had a 130 main jet, stock 38 primary jet, and the needle adjusted almost all the way up to get the hesitation out of it. Feels like going from a small block to a bigblock for sure!! Anyways hope this helps folks out there.!

[@KfromtheBAY]

Curious about that head against the 212 Hemi head, and the 224

[@NONAME-kw3pu]

port the stock head with $20 fleabay WEN grinder. much cheaper. RBG got 2 HP at full song, with stock hemi head with nice port job alone.... other mods were in place and tested alone. the 1.2 rockers only gave .5 HP... hardly worth it for $140. the 24MM flat slide was $140... it got some gains but again hardly worth the expense. fleabay has 24mm carb for $25 it comes with 2 main and 2 idle jets... if u can get the TIGHT TIGHT TIGHT fuel bowl screws off... i cld not get them off with Propane torch and oil ???? WOW THAT IS TOOOOO TIGHT, for the fuel bowl. even vise grips on the screws didnt budge them. the WOT power with 24mm flat slide vs 22mm round slide wasnt that much as i recall... certainly not worth $140.... to me.

[@hellheart1993]

That shred head is just too awesome I gotta try it

[@Black66]

Definitely a good head for the money! It sure woke up this combo.

[@whodawhattha84]

Thanks for all the great content.

[@jaydenbrown3314]

I just got one of these bikes recently I’ve had a mikuni carb that i’m trying to throw on there and a pipe what else would you recommend putting on this bike

[@bilman6639]

What gearing did you have on this? What clutch were you using as well? Really curious.

[@amandarego9684]

Excellent video! I believe that I see a shredder head in my near future. Thanks for testing that head out for us, great alternative to a billet head!

[@Black66]

Thanks for watching! Yeah it is a great head for the money.

[@NONAME-kw3pu]

Port it well. RBG got 2 hp at full song with stock ported hemi head... and springs, rockers, .265? cam. dont go tooo wild with porting the area between the spring perch and the outer wall is thin 4mm? so if get too wild with porting will break thru. 2 part epoxy can fix that. no matter what it wont/cant flow more than the intake valve hole 25mm on 27mm intake valve head... minus 5mm valve stem... x .85 (85% MAX theoretical port flow), but a nice smoother bigger flow path is nice to have... at full song. jetting is important too. that was a nice plug. i wish he wud tell us what jet he has in that carb... at 3700 ft in desert hot hot hot dry air. your elevation/humidity may differ

[@BustedKnucklesBuildsTexas]

Great video !👍👍

[@Black66]

Thanks!

[@brandonwebb2529]

I don't think I've seen u offroad sir

[@superpossum78]

It's not the main focus of his channel but check older vids. He indeed goes off-road for both fun and competition events...

[@SvR602]

Nice!

[@johnsmith-zd5he]

Been holding out a long time on a head upgrade for my tilly 212e, watched this video twice! Five minutes later my wife came up to me asking what the $200 charge on the credit card from some gopowersports place or whatever was for??🤣 You got me again Black hahaha! Cant wait to bolt up the nibbi 24mm and big pipe on that thing and hear what that banzai 265 is really all about!! Thanks again for all the work you do for your vids!!

[@Black66]

LOL That is funny!😂 It really is a good option. I was totally surprised of the difference it made.

[@johnsmith-zd5he]

@@Black66 Hahahah! OMB warehouse has these big toob 1-1/8" header pipes for $40 so im going to ditch the skinny pipe and try one of those too! If anyting, itll sound mean lol!

[@johnsmith-zd5he]

@@Black66 from your gut feeling, while i have this tilly apart now for the umteenth time putting this head, 24 nibbi, pipe etc on this drag bike with a juggernaut and 4.9:1 gear?......would it be worth upgrading the banzai 265 with say a hot 265 or gps 285? Or would that soften it up too much downstairs? right now its a wheelie machine ripper but kind of dies off early. I feel like it would like the extra duration but i dunno?

[@Black66]

@@johnsmith-zd5he I love both ! They have the best sounding idle! I would say the hot 265 is my favorite 265 cam just for the sound at ldle and overall performance. The 285 is awesome too. It's not as snappy as the hot right off idle but once it gets spinning just a little ,it pulls hard and has a wild sounding idle. Both have the fun factor so it's a hard choice lol

[@NONAME-kw3pu]

port the head with $20 fleabay wen grinder. the bearded gentleman got 2 hp at full song with nice head port.... but broke the roof of the head into the "well" next to spring perch. its ~4mm there. some fill that area after brake cleaning it of machining oil, with epoxy. JB weld didnt hold and it sucked oil/air thru the hole in roof of port so the test was over... at 17 HP? at full song with hemi head, 26#? springs 7700 rpms? he felt the HP graph was still going up, a little, at that speed but wondered how much was truly left... wickedly overstressing the little tiller engine. 22# springs for 6789 RPMS? plenty fast enough... they are cheap enough to get 2 sets 22/26 and see where they dont want to anymore . e bay digital tach hour meter $9. on setting 2

[@gavinpalacios6750]

What kind of bike is this

[@AnGryCruizer]

Says it right in the title Coleman mini bike all Custom ✨️

[@gavinpalacios6750]

@@AnGryCruizer I mean when it was stock. B200?

[@Yllivan100]

I'd be curious to see this compared to a ported, polished, and milled stock head

[@NONAME-kw3pu]

ported with fleabay WEN $20 grinder shd be plenty. RBG got 2 HP at full song just from port job. the ROAD TO HORSEPOWER vids are must study vids, write down the hp/torque gains... notice where the motor is pretty much done making USEABLe TORQUE ~4500... and REALISTIC HP....6789 RPMS??? 22# springs for 6789 RPMS... is plenty fast... and wickedly overstressing a $450 motor. $100 motor and $350 worth of parts is PLENTY OF MONEY TO PUT INTO A TOY. fresh oil 10-30 oil, good as any, wont be running mini bike (generally) below freezing, every 8 hours. shut off gas at end of days run and let carb run out of gas so gas wont leak thru carbs needle and seat, thin oil... ruin motor. oil cheap... motor not cheap. simple